What Causes Water Leakage at the Drain Outlet of the A-Pillar Sunroof in the Mazda6?

1 Answers
LilyAnn
07/29/25 3:05pm
Water leakage at the drain outlet of the A-pillar sunroof in the Mazda6 is caused by poor sealing of the front windshield or blockage in the sunroof drainage system. Below are the specific details about the Mazda6: 1. Powertrain: The Mazda6 is equipped with a 2.2L 4-cylinder naturally aspirated engine, delivering a maximum power output of 210 horsepower, and a 3.0L 6-cylinder engine with a maximum power output of 350 horsepower. Both engines are paired with a CVT transmission. 2. Suspension: The front suspension features a unique double-wishbone structure, while the rear suspension adopts a multi-link configuration. The connection between the body and frame is achieved through damping springs, giving the Mazda6 a leading level of vibration damping capability in its class.
Was this review help?
15
2
Share
More Forum Discussions

What is the overtaking sign?

The overtaking sign consists of a short arrow on the right and a three-fold C-shaped arrow on the left bending over the short arrow. Below are detailed steps for proper overtaking: 1. Check mirrors: Before overtaking, observe rear vehicles and road conditions through mirrors. Choose moments with good visibility, straight roads, and no vehicles within 150 meters ahead. 2. Signal left: After confirming safe conditions, turn on the left signal and honk (use high-beam flashing at night if honking isn't allowed). When the front vehicle yields, steer slightly left while maintaining lateral distance. 3. Downshift: Accelerate by pressing the throttle deeply, passing the vehicle on its left side while minimizing parallel driving time. 4. Signal right: After overtaking, maintain speed briefly. Check mirrors for following vehicles, then activate the right turn signal before returning to the original lane when safe.
16
5
Share

Can Alcohol Be Used to Disinfect a Car?

Alcohol can be used to disinfect a car. Here are the specific details about using alcohol for car disinfection: 1. Use 75% concentration medical alcohol: To achieve effective disinfection and sterilization, car owners need to use medical alcohol with a concentration of 75%. If the alcohol concentration is too low, it will not have the desired disinfecting effect. Alcohol molecules have strong permeability, allowing them to penetrate the bacterial surface membrane, enter the bacteria's interior, coagulate the proteins that form the basis of bacterial life, and thereby kill the bacteria. 2. Turn off the car and be mindful of alcohol usage: Before using alcohol to disinfect the vehicle, car owners should turn off the engine to ensure the car is not running. It is also important to maintain proper ventilation inside the car. Since 75% alcohol has a flash point around 22°C and evaporates quickly, car owners must ensure there are no open flames nearby and be cautious about the amount of alcohol used to avoid high air alcohol concentration, which could lead to an explosion.
18
2
Share

How to Use Reference Points for Parallel Parking and Exiting?

After parking the vehicle steadily in the designated area, shift into reverse gear and begin backing up. At this point, observe the left rearview mirror. When the left boundary line aligns with the lower edge of the left rearview mirror, turn the steering wheel fully to the right. Continue observing the right rearview mirror. When the far-right boundary line becomes visible and the distance between the vehicle body and the corner of the parking space is less than 30cm, turn the steering wheel back halfway. Once you confirm that the right wheels can smoothly enter the parking space, observe the left wheels through the left rearview mirror. When the vehicle body is parallel to the boundary line of the parking space, quickly straighten the steering wheel. Keep observing the left rearview mirror to maintain parallelism between the vehicle body and the boundary line of the parking space. Stop the vehicle when the front boundary line of the parking space appears at the position of the left rearview mirror.
7
0
Share

Are Hybrid Cars Considered New Energy Vehicles?

Hybrid cars are not classified as new energy vehicles. Here is more information about hybrid cars: 1. A hybrid car combines fuel (gasoline or diesel) and electric power, using an electric motor as an auxiliary power source to assist the engine in driving the vehicle. At the start of the journey, the battery is fully charged, providing sufficient energy to meet the vehicle's demands, so the auxiliary power system does not need to operate. When the battery level drops below 60%, the auxiliary power system activates. When the vehicle requires higher energy, both the auxiliary power system and the battery supply energy to the drivetrain. When energy demand is low, the auxiliary power system not only powers the drivetrain but also recharges the battery. 2. Hybrid cars offer superior fuel efficiency and excellent driving performance. Since hybrid cars still rely on fuel for their engines, the assistance of the electric motor during acceleration and startup helps reduce fuel consumption.
9
5
Share

How to Determine if Fake Engine Oil Has Been Added?

When the engine produces abnormal noises, the oil consumption is very rapid, the oil temperature rises, and the oil pressure warning light on the dashboard frequently illuminates, it can be determined that fake engine oil has been added. The following are the specific functions of engine oil: 1. Shock absorption and cushioning: When the pressure at the engine cylinder port rises sharply, suddenly increasing the load on the piston, piston pin, connecting rod, and crankshaft bearings, this load is transmitted and lubricated through the bearings, cushioning the impact load. 2. Rust and corrosion prevention: Lubricating oil adheres to the surface of parts, preventing contact with water, air, acidic substances, and harmful gases. 3. Lubrication and wear reduction: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing shells. To prevent excessive wear, an oil film of sufficient thickness must be established between the sliding surfaces to separate them, thereby reducing wear.
6
5
Share

What is the function of the car air conditioner ION?

ION refers to the air purification function. When ION is activated, the air purifier starts working. The new ION system mainly consists of two components: a PM2.5 sensor and a negative ion generator. The specific details are as follows: PM2.5 sensor: Its function is to measure the PM2.5 content in the air inside and outside the vehicle, serving as the basis for whether to automatically activate ION and displaying the measured PM2.5 concentration on the car's screen. This sensor is installed inside the vehicle's dashboard, to the right of the blower and on the right front A-pillar. Negative ion generator: It boosts the 12V low voltage to hundreds of volts of high voltage, ionizing the air to form negative ions for air purification, dust removal, deodorization, and sterilization. It is installed between the blower and the evaporator.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.