What Causes Water Leakage Above the Left Car Door?

1 Answers
LeahAnn
07/29/25 5:03pm
Water leakage above the left car door is generally caused by aging door frame seals or deformation of the door sealing strips. Below are some related tips for door maintenance: 1. Proper Door Closing: After exiting the vehicle, push the door to a distance of 10-15cm from the car body, then gently close it with a slight force. Alternatively, slowly push the door until it closes before releasing your hand. This effectively protects the door and avoids loud noises. 2. Door Maintenance: The key to extending the lifespan of your car door is "maintenance." Frequent opening and closing of the door can increase wear and corrosion of the door limiter and hinges if not lubricated in time, potentially leading to malfunctions. It is advisable to have a professional lubricate the door hinges and limiter with grease to reduce wear and tear.
Was this review help?
2
3
Share
More Forum Discussions

How to Use a Jump Starter?

Connect the negative terminal of the dead car battery to the negative terminal of another car's battery, and connect the other car's negative terminal to a metal part of the dead car. Press the switch on the emergency jump starter power supply to turn it on, which puts it in the same ready state as the traditional jump-start method.
18
1
Share

Is a Used 2006 Buick GL8 Landau Worth Buying?

The value of this used car needs to be determined based on factors such as the vehicle's age, condition, mileage, whether it has been involved in any major traffic accidents, and the number of insurance claims filed. Only by fully understanding all these vehicle-related details can an accurate valuation of the car be made. Here are the details about the Buick GL8 Landau: 1. Powertrain: The GL8 Landau 653T model is equipped with a 2.0T variable-cylinder turbocharged engine featuring Tripower variable valve management technology. It intelligently and smoothly switches between "four-cylinder high-performance mode," "four-cylinder economy mode," and "two-cylinder ultra-economy mode." Paired with a 9-speed HYDRA-MATIC intelligent transmission, it can shift into 9th gear at speeds below 83 km/h, delivering a more responsive and smoother driving experience. 2. Configuration: It offers a spacious 521-liter trunk, which can easily accommodate three 26-inch and two 24-inch suitcases when fully seated. When the third-row seats are folded down, the trunk space expands to 1,650 liters. Combined with 37 storage compartments throughout the vehicle, it effortlessly meets various travel storage needs.
13
4
Share

Is it illegal to modify a single exhaust into a dual exhaust?

Modifying a single exhaust pipe into a dual exhaust pipe cannot be done privately, as unauthorized vehicle modifications are illegal and require submitting an application to the vehicle management office. According to the "Motor Vehicle Registration Regulations": Article 9 states that applications to change the body color of a motor vehicle or replace the body or frame must fill out the "Motor Vehicle Modification Registration Application Form" and submit the required legal documents and certificates. Below are the relevant requirements for vehicle modifications: 1. Modification process: The vehicle management office shall decide whether to approve or reject the modification within one day of receiving the application. For approved modifications, the vehicle owner must present the modified vehicle for inspection at the vehicle management office within ten days after the modification. The vehicle management office shall confirm the vehicle within one day of receiving the application, retrieve the original vehicle license, and reissue a new one. For modifications involving the replacement of the body or frame, the vehicle identification number (frame number) imprint must be verified, and the origin certificate of the body or frame must be retained. 2. Modifications requiring registration: Registered motor vehicles must apply for modification registration with the local vehicle management office in the following cases: changing the body color; replacing the engine; replacing the body or frame; or replacing the entire vehicle due to quality issues.
12
3
Share

What are the four positions of the car ignition switch?

The four positions of the car ignition switch are START (starting position), ON (power-on position), ACC (accessory power-on position), and LOCK (locking position). Below are the detailed introductions of each position: 1. START position: Starting position. When the key is turned to this position, the starter circuit is connected, which drives the engine to operate and start. After releasing, the key will automatically return to the ON position. 2. LOCK position: Locking position. This is the position where the key is inserted and removed. At this time, except for the anti-theft system and interior small lights, the vehicle's circuits are completely turned off, and the steering wheel is locked. After locking the car, the key will be in the LOCK state, where the key not only locks the steering but also cuts off the entire vehicle's power supply. 3. ACC position: Accessory power-on position. When the key is turned to this position, the accessory circuits are connected, and devices such as the radio can be used. The ACC state provides power to some of the car's electrical equipment, such as the CD player and air conditioning. 4. ON position: Power-on position. When the key is turned to this position, all vehicle circuits are connected, and the system prepares necessary operations and self-checks for starting the engine. The key remains in this position during normal driving.
15
3
Share

How to deal with the black screen of Buick GL8 central control screen?

When the car's central control screen appears black, it is most likely due to poor line contact. It is necessary to promptly check whether the lines are loose. Of course, it may also be because the power signal line has aged. You can try replacing it with a new one. It may also be due to prolonged use of the screen, causing a failure in the power supply module. It needs to be inspected and repaired at a maintenance shop or directly replaced.
14
3
Share

What are the differences between 6AT and CVT automatic transmissions?

Here are the specific differences between 6AT and CVT automatic transmissions: 1. Principle: 6AT: Due to the insufficient torque conversion range of the hydraulic torque converter, multiple planetary gear sets are connected in series behind the turbine to improve efficiency. The hydraulic control system automatically operates the planetary gears according to engine working conditions, achieving automatic speed and torque conversion. CVT: The conical pulleys can tighten or loosen under hydraulic pressure, squeezing the steel belt to adjust the width of the V-shaped groove. When the pulleys move inward to tighten, the steel belt moves outward from the center under pressure, and vice versa. This changes the diameter of the driven pulley, thus altering the gear ratio. 2. Usage: 6AT: It shifts without a clutch, with fewer but more significant gear changes, providing smooth connection. This makes operation easier, offering convenience to drivers and comfort to passengers. CVT: Without traditional transmission gears, there's no shifting process, eliminating shift shock. Therefore, CVT transmissions deliver linear power output, resulting in exceptionally smooth driving experience.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.