What Causes Vehicle Body Shaking?

2 Answers
DelRyan
07/28/25 7:30pm
Vehicle body shaking can be attributed to the following main reasons: 1. Excessive engine carbon deposits: As the engine usage time increases, when the throttle is too dirty or the fuel injector has excessive carbon deposits, the engine may exhibit shaking. It is advisable to clean the throttle promptly during regular vehicle use. 2. Ignition system malfunction: Issues with the ignition system are also one of the causes of vehicle shaking. When there are problems with the spark plugs, high-voltage wires, or ignition coils in the ignition system, starting the car may also result in shaking. Owners can check the spark plugs to determine the cause of idle speed shaking. 3. Unstable oil pressure: When the fuel pump's supply pressure data is inaccurate, the vehicle may shake during idle driving. It is important to check the oil pressure and replace it if necessary to avoid more significant malfunctions.
Was this review help?
15
2
Share
VanAlejandro
08/12/25 12:32am
Last time I experienced body vibration while driving, I initially thought it was due to uneven road surfaces, but later discovered it was a tire issue. Improper wheel alignment or failed wheel balancing can cause the wheels to rotate unevenly, especially noticeable as steering wheel vibrations at high speeds. The engine also requires attention—for instance, aging spark plugs causing misfires can make the engine shake like a massage chair. Additionally, worn engine mounts can transmit engine vibrations directly to the body, making the entire seat vibrate at red lights. I recommend first checking for any deformities in the tires and rims, then reading the fault codes to see if there's an issue with the ignition system. As a side note, prolonged neglect of vibrations may damage the suspension system, leading to more expensive repairs.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

How often should the drive shaft be greased?

Drive shafts should be greased every half month. Grease is the common name for calcium-based lubricating grease. Currently, lubricating grease has developed into a variety of products with multiple series, not only including calcium-based lubricating grease but also lithium-based lubricating grease, composite lithium-based lubricating grease, etc. There are also lubricating greases classified by purpose, such as bearing grease and gear grease, with colors becoming increasingly diverse. The drive shaft is a high-speed, low-support rotating body composed of a shaft tube, telescopic sleeve, and universal joint. The drive shaft connects or assembles various accessories and is a circular moving or rotating component, generally made of lightweight and torsion-resistant alloy steel pipe.
1
4
Share

What is an Oil Filter?

An oil filter, also known as an oil strainer, is a cylindrical component designed to remove impurities such as dust, metal particles, carbon deposits, and soot from engine oil, thereby protecting the engine. Key details about oil filters are as follows: 1. Function of an oil filter. It filters out harmful contaminants from the oil in the oil pan, delivering clean oil to moving parts like the crankshaft, connecting rods, camshaft, turbocharger, and piston rings, providing lubrication, cooling, and cleaning effects, thus extending the lifespan of these components. 2. Structure of an oil filter. Types include replaceable, spin-on, and centrifugal filters; based on system layout, they can be categorized as full-flow or bypass filters. The filtration materials used in oil filters include filter paper, felt, metal mesh, and non-woven fabric.
13
1
Share

What are the body dimensions of the Volkswagen Bora?

The body dimensions of the Volkswagen Bora are: length 4663 mm, width 1815 mm, height 1462 mm. It is a 4-door, 5-seat compact car with a wheelbase of 2688 mm, a fuel tank capacity of 50 liters, a trunk capacity of 506 liters, and a curb weight of 1320 kg. The 2021 Volkswagen Bora is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116 PS and a maximum power of 85 kW. It is paired with a 7-speed dual-clutch transmission, featuring front-wheel drive. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
11
3
Share

What is ISO-VG32 oil?

ISO-VG32 is an internationally recognized viscosity classification method. Different brands offer products with this viscosity grade, all expressed in the same way. VG32 indicates that the kinematic viscosity at 40°C is approximately 32. Below is a relevant introduction: 1. Explanation: ISO refers to the International Organization for Standardization, and VG is the abbreviation for viscosity-grade, meaning viscosity grade. ISO classifies grades based on the viscosity of lubricating oil measured at 40°C, similar to sizing shoes. 2. Industrial Lubricants: Lubricants are divided into automotive lubricants and industrial lubricants. The viscosity grades of industrial lubricants are classified according to ISO standards internationally. Industrial lubricants include various types such as industrial gear oil, turbine oil, chain oil, refrigeration oil, food-grade lubricant, compressor oil, and hydraulic oil.
19
2
Share

What Causes the Jerking Sensation When Shifting Gears in an Automatic Transmission Car?

Automatic transmission cars may experience a jerking sensation when shifting gears due to the following reasons: 1. Internal clutch pressure leakage in the transmission; 2. Blocked or obstructed transmission oil passages, wear and tear on the oil passage plate, or degraded transmission oil leading to reduced lubrication effectiveness; 3. Insufficient transmission oil level below the standard mark; 4. Damaged solenoid valve, causing sludge in the transmission oil to circulate and clog the oil passages within the valve body. An automatic transmission eliminates the need for manual gear shifting by the driver, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typically, automatic transmission cars feature six gear positions arranged from top to bottom as follows: P, R, N, D, S, L.
2
5
Share

How to Apply for a Vehicle License?

The process for applying for a vehicle license is as follows: 1. The vehicle owner brings relevant documents and certificates to the vehicle purchase tax office to pay the additional vehicle purchase tax; 2. Submit the required documents and certificates for the vehicle purchase tax at the vehicle management office for approval and license plate issuance; 3. After completing the vehicle insurance, proceed with the vehicle registration formalities at the registration hall; 4. Collect the license plate receipt and pay the required fees; 5. After payment, the vehicle license and the vehicle registration certificate can be obtained. The vehicle license is the legal document permitting the vehicle to be driven on the road, consisting of three parts: the license holder, the main page, and the supplementary page. The front of the main page contains the signed certificate core, while the back has the vehicle photo sealed in plastic. The supplementary page is also a signed certificate core.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.