What causes unstable idle speed in the Beidou Star (Suzuki Wagon R)?

Why Does the Coolant Temperature Become Too High?

Causes of excessively high coolant temperature: 1. Insufficient coolant; 2. Slipping, broken fan drive belt or incorrect fan blade angle; 3. Failure of the fan clutch; 4. Insufficient opening or failure to open of the thermostat valve; 5. Overly rich or lean air-fuel mixture; 6. Engine operating under prolonged heavy load or overload. Methods to handle excessively high coolant temperature are as follows: 1. Immediately reduce speed and, after slowing down, drive the car to a safe area by the roadside to park; 2. Do not turn off the engine immediately. After parking, do not shut down the engine right away because excessively high water temperature can lead to overheating of the piston, cylinder walls, cylinder, crankshaft, etc., thinning of the engine oil, and loss of lubrication. Shutting down the engine could cause some soft metals to peel off, and in some cases, even lead to cylinder sticking; 3. Let the engine idle in place for a few minutes, adjust the air conditioning to the heating mode, set the fan to maximum speed, and open the hood to help the engine dissipate heat. Turn off the engine only after the water temperature has dropped.

16

2

Share

Does the Corolla have cruise control?

The Corolla does not come with cruise control across all its models. Here is some relevant information: Dimensions: The length, width, and height of this car are 4635 millimeters (mm), 1780 millimeters (mm), and 1455 millimeters (mm) respectively, with a wheelbase of 2700 millimeters (mm). The Corolla is equipped with two types of engines: one is a 1.8-liter naturally aspirated engine, and the other is a 1.2-liter turbocharged engine. Configuration: The model equipped with the 1.8-liter naturally aspirated engine is the hybrid version. The 1.8-liter naturally aspirated engine in the Corolla has a maximum power output of 72 kW, with the maximum power achieved at 5200 rpm, and a maximum torque of 142 Nm, with the maximum torque achieved at 3600 rpm. This engine features VVT-i technology and multi-point fuel injection, and it uses an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power output of 53 kW and a maximum torque of 163 Nm.

7

1

Share

What is the wheelbase of the Audi Q3?

Audi Q3 has a wheelbase of 2603mm. Here is relevant information: Introduction: The Audi Q3 is an SUV based on the same PQ35 platform as the Volkswagen Tiguan, positioned below the Q7 and Q5 in Audi's model lineup. To differentiate it from Volkswagen models, the Audi Q3 has been tuned for more dynamic driving performance and features a luxurious, distinctive exterior. It will be equipped with adaptive dampers, similar to those found on the TT. Powertrain: In terms of powertrain, Audi will initially offer three four-cylinder engines for the Q3. The standard gasoline model comes with a 170-horsepower 2.0TFSI engine, while the top-tier Q3 model is equipped with the 211-horsepower 2.0TFSI engine from the Q5, achieving a 0-100 km/h acceleration time of 6.9 seconds. The 2.0TDI diesel engine delivers a maximum power of 140 horsepower.

7

4

Share

Why Does the Tire Pressure Monitoring Display Turn Yellow?

Tire pressure abnormalities can cause the tire pressure monitoring display to turn yellow. Tire Pressure Monitoring: Tire pressure monitoring is mainly divided into two types: indirect tire pressure monitoring (Wheel-Speed Based TPMS, abbreviated as WSB) and direct tire pressure monitoring (Pressure-Sensor Based TPMS, abbreviated as PSB). When the tire pressure is too high, it reduces the contact area between the tire and the ground, while the pressure the tire bears increases relatively, affecting the tire's grip. Importance of Tire Pressure Monitoring: Data shows that tire blowouts account for a very high proportion of severe traffic accidents, and among all factors that can cause blowouts, insufficient tire pressure is the primary cause. This is not an exaggeration. Even if you do not choose a vehicle equipped with tire pressure monitoring, it is essential to pay attention to your vehicle's tires to avoid serious harm to both people and the vehicle. When the tire pressure is too high, it reduces the contact area between the tire and the ground, while the pressure the tire bears increases relatively, affecting the tire's grip. Additionally, when the vehicle passes over bumps or uneven roads, the tire lacks sufficient space to absorb vibrations, which not only affects driving stability and ride comfort but also increases the impact on the suspension system, leading to potential hazards. At the same time, the risk of blowouts increases correspondingly in high temperatures.

16

0

Share

What is the Minimum Speed Limit Sign?

The minimum speed limit sign indicates the minimum speed restriction for motor vehicles entering the road ahead. This sign is placed at the starting point of expressways or other speed-limited road sections. It specifies that under good road conditions ahead, motor vehicles must maintain a minimum speed of no less than 50 km/h. The sign is installed at appropriate locations including the starting points of expressways or other speed-limited road sections and after various interchange intersections. Below are detailed explanations about the minimum speed limit sign: 1. Meaning: Road traffic signs are facilities that convey specific information through graphic symbols, colors, and text to manage traffic. They play a crucial role in ensuring smooth traffic flow and driving safety, thus must be observed by all drivers and traffic participants. Traffic safety slogans can enhance drivers' and traffic participants' awareness of voluntarily complying with traffic regulations, which is significant for building a safe and smooth traffic environment. 2. Current Situation: In China, speed limit signs are primarily set based on segmented road sections. For general road sections with good alignment, speed limits are determined according to operating speeds; while for other sections, they are set based on traffic conditions or road accident statistics.

7

3

Share

What is the wading standard for the Regal?

The Regal's exhaust pipe has a ground clearance of 30.5 cm, and the half-height of its wheels is 32.5 cm. The half-height of the wheels is a conservative safe wading depth. At this water level, there is a possibility of water entering the exhaust pipe, but it won't cause the engine to stall, so you can safely pass through. Below is relevant information: Wading driving: Always drive at a low speed. For manual transmission vehicles, depending on the water depth, it is recommended to use second or third gear. In cases of deep water and heavy traffic, use first gear. Wading limit: The vehicle's air intake is located behind the grille, with the opening facing forward. The air filter is positioned about 5 cm above the air intake, so even if some water enters the intake, it won't reach the air filter. The Regal's air intake has a ground clearance of 61 cm, which is its wading limit. This is roughly equivalent to five-sixths of the wheel height, or the top of the wheel hub. When the water level reaches this point, although there is still about 5 cm to the air filter, it already prevents the engine from breathing normally. Therefore, when the water level reaches the upper seam between the wheel hub and tire, you should not continue wading.

20

0

Share

What causes unstable idle speed in the Beidou Star (Suzuki Wagon R)?

Why Does the Coolant Temperature Become Too High?

Does the Corolla have cruise control?

What is the wheelbase of the Audi Q3?

Why Does the Tire Pressure Monitoring Display Turn Yellow?

What is the Minimum Speed Limit Sign?

What is the wading standard for the Regal?

How many airbags does the Corolla have?

Where is the trunk sensor on the Magotan?

How often should the spark plugs be replaced for the Tiguan 1.8T?

Is it safe to drive a car with a gasoline leak?