What causes unstable engine idle speed in the morning?

1 Answers
MacConnor
07/30/25 3:25am
Reasons for unstable engine idle speed in the morning are as follows: Low car battery voltage: Test the battery voltage with a multimeter. If it's below 10V, replacement is recommended. If around 11V, it can be used temporarily but prepare for replacement. Above 12V is acceptable. Caused by carbon deposits: Check if caused by carbon deposits; if the vehicle has run about 20,000 KM, focus on inspecting and cleaning the throttle body. Spark plug issues: Inspect, test, and replace spark plugs. Fuel supply system: Test and inspect components related to the starting and fuel supply system, such as the starter, fuel pump, and sensors.
Was this review help?
1
2
Share
More Forum Discussions

Will the Car Lock Automatically with the Key Inside?

Car keys inside the vehicle can cause the car to lock automatically. This is because the anti-theft feature protects against theft but can also affect the owner. After the vehicle is turned off, if the doors are closed without the key, both the doors and the rear hatch will automatically lock after a few minutes. You can seek assistance from the nearest authorized dealership. The dealership will verify the owner's identity, so it's best to bring your ID card, vehicle registration, and other documents. If there is no dealership nearby, you will have to contact a locksmith to unlock the car, and providing identification is also required when using a locksmith. Functions of Car Keys: Many car keys now come with a feature to close the windows after the engine is turned off. Simply pressing the lock button once will automatically close the windows. Some models require holding the lock button for a longer duration. Automatic trunk opening: Some cars require pressing the trunk button twice, while others require holding the trunk control button to open the trunk. Remote window control: During summer, when the car interior is stuffy, you can use the remote to open all windows before entering the vehicle. This helps release the hot air inside before driving. Single-door opening: You can set the key to open only the driver's door with one press and all doors with two presses.
20
0
Share

What Types of Insurance Should You Buy for a Sedan?

There are four essential types of car insurance: compulsory traffic insurance, vehicle damage insurance, third-party liability insurance, and no-deductible insurance. Other types of car insurance can be purchased selectively based on actual needs. 1. Compulsory Traffic Insurance: This insurance is mandatory by law. Without it, you cannot drive on the road. If caught by traffic police without this insurance, your vehicle will be impounded, you will be fined double the premium, and you must purchase it immediately to resume driving. 2. Vehicle Damage Insurance: In the event of a traffic accident, this insurance covers the loss or damage to your own vehicle. After compulsory traffic insurance, vehicle damage insurance is arguably the most important car insurance. Its price, coverage amount, and scope of protection should be thoroughly understood. 3. Third-Party Liability Insurance: Often abbreviated as "third-party insurance" or "TPL," it primarily covers bodily injury and property damage to third parties in traffic accidents. 4. No-Deductible Insurance: This insurance transfers the cost that the policyholder would otherwise bear to the insurance company. Most car insurance policies have a deductible rate (a portion of the cost the policyholder must pay in the event of an accident). For example, vehicle damage insurance has a 15% deductible rate (in cases where the policyholder is primarily at fault), while theft insurance and third-party liability insurance can have a deductible rate of up to 20%.
6
1
Share

Is Front-Wheel Drive or Rear-Wheel Drive Better for Sedans?

Both have their own advantages and disadvantages, but for family sedans, front-wheel drive is generally better due to its superior fuel economy and more spacious interior. Differences between Front-Wheel Drive and Rear-Wheel Drive: Front-wheel drive (FWD) vehicles are powered by the front wheels only, meaning the car is pulled forward by the front wheels. Rear-wheel drive (RWD) vehicles are powered by the rear wheels, meaning the car is pushed forward by the rear wheels. Advantages and Disadvantages of Front-Wheel Drive: Advantages: More affordable, as most family cars are FWD; larger cabin space, providing more comfort for rear passengers; fewer and simpler mechanical components, eliminating the need for a driveshaft, which reduces vehicle weight. Disadvantages: Prone to understeer; front tires bear both driving and steering responsibilities, leading to faster wear. Advantages and Disadvantages of Rear-Wheel Drive: Advantages: Better handling, as rear wheels handle propulsion while front wheels focus on steering, resulting in more agile responses; balanced weight distribution, enhancing stability and smoothness, which benefits tire longevity. Disadvantages: Higher cost; less efficient space utilization, affecting passenger comfort; prone to oversteer; greater power loss compared to FWD due to the additional step of transmitting power through the driveshaft.
2
0
Share

Is a 1.5L Automatic Transmission Sufficient for Mountain Driving?

1.5L automatic transmission is not sufficient for mountain driving. It might be acceptable for manual transmission models or those with highly efficient dual-clutch transmissions, but CVT or AT torque converter transmissions would struggle. The 1.5L naturally aspirated engine itself has average power, and when paired with an automatic transmission, it can feel underpowered on mountain roads. If the car is carrying several passengers and some luggage in the trunk, it will be particularly challenging. Below are some driving precautions: Check the rearview mirrors: When turning or changing lanes, always use turn signals and reduce speed. Before turning, be sure to check the rearview mirrors. For left turns, primarily check the left rearview mirror, and for right turns, primarily check the right rearview mirror. For both left and right turns, also check the interior rearview mirror. Don't focus solely on the front of the car: When driving on clear roads, look straight ahead about 100 meters, rather than focusing only on the immediate front of the car. Depress the clutch: Generally, when decelerating at speeds above 40 km/h, there's no need to press the clutch first. Wait until the speed drops to around 20 km/h before pressing the clutch. Steering: Turn the steering wheel slowly at high speeds and quickly at low speeds.
5
1
Share

What are the two types of accelerator pedals?

Currently, automobile accelerator pedals are divided into two types: floor-mounted accelerator pedals and suspended accelerator pedals. Floor-mounted accelerator pedal: Since the pivot point of a floor-mounted pedal is located at the bottom of the pedal, the entire foot can rest on it, with the pedal itself acting as a fulcrum. This allows the calf and ankle to control the pedal more effortlessly, thereby improving pedal control precision and reducing fatigue. Suspended accelerator pedal: With the pivot point located at the top of the bracket, the suspended accelerator pedal has a relatively simpler lower structure. This design makes the pedal lighter to operate and allows the pedal bracket to be constructed from a metal rod, significantly reducing manufacturing costs. As a result, many manufacturers prefer this type of pedal. However, compared to floor-mounted pedals, suspended accelerator pedals only provide a fulcrum for the front part of the foot, which can lead to stiffness in the calf during prolonged driving. Function of the accelerator pedal: The primary function of the accelerator pedal is to control the throttle valve's opening, thereby regulating the engine's power output. In some vehicles, the accelerator pedal is connected to the engine's throttle valve via a throttle cable or linkage, allowing the driver to directly control the throttle valve when pressing the pedal. Modern vehicles often use electronic throttle systems, where the accelerator pedal and throttle valve are no longer connected by a cable. Instead, the electronic throttle pedal is equipped with a displacement sensor. When the driver presses the pedal, the ECU collects data on the pedal's displacement and acceleration changes. Based on built-in algorithms, the ECU determines the driver's intent and sends corresponding control signals to the throttle valve's motor, thereby regulating the engine's power output.
2
3
Share

Differences Between Changan Mazda and FAW Mazda?

The differences between FAW Mazda and Changan Mazda are as follows: 1. Models: FAW Mazda offers the Atenza and CX-4, while Changan Mazda provides the Axela and CX-5. In terms of models, both FAW Mazda and Changan Mazda feature one compact SUV and one sedan product in the latest generation of Mazda models, with both brands positioning their products towards a sporty orientation. Therefore, there is no significant difference in model styles and layouts between the two. 2. Quality: Initially, Changan Mazda produced the KODO generation Mazda models by importing core components, such as engine core parts from Japan, transmissions from Thailand, and chassis frames pressed and welded on Mazda's Nanjing production line. As Changan Mazda mastered the production technology for Mazda's new-generation models, most components, including core parts like engines, steering gears, and transmissions, have now been localized. In contrast, FAW Mazda's sales are considerably lower than Changan Mazda's, so FAW Mazda still relies on imports for its core three major components (engine, transmission, and chassis), with other less technical accessories being domestically produced. However, this is temporary, as Changan Mazda is actively discussing cooperation with FAW Mazda, and in the future, FAW Mazda is expected to use domestically produced core components like Changan Mazda. 3. Workmanship: Changan has traditionally been weaker in this area, and with Changan Mazda's current good sales and increased production capacity, products made under overtime conditions show slightly poorer workmanship details compared to FAW Mazda. Therefore, at this stage, FAW Mazda, which uses imported core components and does not require overtime production, is slightly better than Changan Mazda, which uses domestically produced core components.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.