What Causes Trunk Malfunction?

Can Adding Fog Lights Pass the Annual Inspection?

Adding fog lights can pass the annual inspection. Here are the specific details about fog lights: Precautions for adding fog lights: When visibility drops below 100 meters, fog lights must be turned on, and speed should be reduced. If visibility is below 30 meters, turn on the fog lights, pull over, and activate the hazard warning lights. In conditions of rain, fog, snow, or dust, fog lights should be turned on and speed reduced. Installation method for fog lights: Fog lights are installed below the bumper, closest to the ground, to maximize their effectiveness. If installed too high, the light may not penetrate the rain or fog to illuminate the road surface, making it dangerous as fog is thinner below 1 meter. Operation of fog lights: The fog light switch has three positions: 0 for off, 1 for front fog lights, and 2 for rear fog lights. Before use, it is recommended to know which position the switch is in to ensure convenience for yourself and safety for others. Classification of fog lights: Fog lights are divided into front and rear fog lights. In China, rear fog lights are mandatory for all vehicles, while front fog lights are not strictly required. Front fog lights are less useful, as low beams or contour lights can fully substitute for them. Therefore, to save costs, some car manufacturers may omit front fog lights.

10

0

Share

Can I still renew my driver's license if it has been expired for one month?

Driver's license expired for one month can be renewed. Renewal period: Motor vehicle drivers should apply for renewal at the vehicle management office of the driver's license issuing authority within 90 days before the expiration of the motor vehicle driver's license. When applying, the "Motor Vehicle Driver's License Application Form" should be filled out. Time regulations: If the expiration is less than one year, the license can be renewed normally; if the expiration is more than one year but less than three years, the license will be canceled, but it can be renewed by passing the subject one test; if the expiration is more than three years, the license will be invalid and cannot be renewed. Renewal process: The motor vehicle driver should bring the required materials to the vehicle management office of the driver's license issuing authority to apply for renewal. The vehicle management office will complete the renewal procedures within one working day after passing the review.

6

1

Share

How many seconds can the clutch be pressed during the start of Subject 3?

Subject 3 examination stipulates that the clutch should not be pressed continuously for more than 5 seconds, meaning the time for pressing the clutch before and after shifting gears should not be too long, otherwise it will result in an immediate failure of the test. Correct way to press the clutch in Subject 3: Press the clutch with the tip of your foot, keeping the heel off the ground. After shifting into first gear, slowly retract your foot backward, lift the entire leg, and gradually release the clutch to the semi-engaged state. The clutch will then slide from the tip of your foot to the center, at which point the heel should touch the ground. If the clutch is not fully pressed down, you will hear a grating sound of gears clashing during gear shifting, which is very sharp and noticeable. This will result in point deductions during the test. For regular driving, this can also damage the vehicle. Additionally, skipping gears while shifting up is not allowed, as it leads to a mismatch between speed and gear, known as "low speed with high gear," causing severe body vibration and possibly stalling the engine. Prolonged driving in low gears is also prohibited. The test imposes limits on the distance covered in first and second gears: no more than 50 meters for first gear and 100 meters for second gear per instance. Slow gear shifting in low gears can easily exceed these limits, as can driving long distances in first or second gear.

5

2

Share

How long after failing the subject 4 test can you schedule a second appointment?

If you fail the subject 4 test, you can schedule another test after an interval of more than 10 days. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Article 44 Each subject test can be taken once, and if the test is failed, a make-up test can be taken once. If you do not take the make-up test or still fail the make-up test, this test will be terminated, and the applicant must schedule the test again, but the subject 2 and subject 3 tests must be scheduled 10 days later. If you fail the subject 3 safety and civilized driving knowledge test, the passed road driving skill test scores remain valid. Within the validity period of the learning driving certificate, the number of scheduled tests for subject 2 and subject 3 road driving skill tests must not exceed five times. If the fifth scheduled test is still failed, the passed scores of other subjects will be invalidated. Here is an introduction to the driver's license test: The content of the driver's license test is divided into subject 1, subject 2, subject 3, and subject 4. Each subject test has two chances. Only after passing all four subjects can you obtain a motor vehicle driver's license. The probation period after obtaining the motor vehicle driver's license is one year.

19

0

Share

What Causes a Car to Require a Second Ignition Attempt?

Common causes for a car requiring a second ignition attempt include battery failure, slowed oil flow, frozen exhaust pipe or excessive valve carbon deposits, engine malfunction, and exhaust pipe freeze blockage. Battery Failure: In low temperatures, a battery's capacity decreases. After prolonged use, the starting voltage may drop. It's advisable to replenish the battery electrolyte or replace the battery. Slowed Oil Flow: In cold weather, engine oil becomes more viscous, slowing its flow and increasing engine resistance, making it harder to start the car. It's recommended to use winter-specific engine oil during colder months. Frozen Exhaust Pipe or Excessive Valve Carbon Deposits: During operation, the engine's combustion process produces moisture, which can condense in certain areas. Excessive carbon deposits on the valves can clog the throttle body. Regular cleaning of the throttle body is advised. Engine Malfunction: Severe engine wear leading to reduced sealing and insufficient cylinder pressure can also cause starting difficulties. In such cases, removing the spark plugs, cleaning the oil between the electrodes, and reinstalling them before attempting to start the car may help. Frozen Exhaust Pipe Blockage: Moisture from engine combustion can freeze in the exhaust pipe's muffler. Starting the car to warm up and melt the ice in the exhaust pipe is necessary.

6

5

Share

How long after a motorcycle is turned off can it be washed?

It is recommended to wait for half an hour after turning off the engine before washing the motorcycle. Detailed explanation: Do not wash the motorcycle immediately after turning off the engine, and avoid using a high-pressure water jet to directly spray the engine during washing. This can easily cause rapid thermal expansion and contraction of the engine, leading to compromised engine sealing. Additional information: Motorcycles are a popular means of transportation for many consumers due to their lightweight, flexibility, and powerful performance. Most motorcycles use a four-stroke gasoline engine, which operates on the same principle as a car engine. A four-stroke gasoline engine consists of four strokes: intake stroke, compression stroke, power stroke, and exhaust stroke.

13

1

Share

What Causes Trunk Malfunction?

Can Adding Fog Lights Pass the Annual Inspection?

Can I still renew my driver's license if it has been expired for one month?

How many seconds can the clutch be pressed during the start of Subject 3?

How long after failing the subject 4 test can you schedule a second appointment?

What Causes a Car to Require a Second Ignition Attempt?

How long after a motorcycle is turned off can it be washed?

What does ECO mean?

How Many Days Can a New Car Use Temporary License Plates?

What is the reason for a car to have Evans sticker?

What speed should be reduced to when downshifting from third gear to second gear?