What Causes Truck Shaking During Startup?

What Are the Reasons for High Fuel Consumption in Wuling Vehicles?

There are several reasons for high fuel consumption in Wuling vehicles: 1. Fuel consumption fluctuations due to temperature influence: Low temperatures increase the heat dissipation from the engine. The engine needs to maintain a constant temperature to operate properly, and more heat dissipation requires burning more gasoline to generate heat. 2. Long-term lack of vehicle maintenance: Dirty engine oil and air filters can also lead to increased fuel consumption. Dirty engine oil results in poor lubrication, increasing resistance in the engine's moving parts, which requires more energy to overcome, thereby increasing fuel consumption. 3. Spark plugs need replacement: If ignition occurs after the piston starts moving downward, it leads to partial power loss, with much energy not being used for work. This also causes incomplete combustion, further increasing fuel consumption. 4. Insufficient tire pressure: Insufficient tire pressure increases the contact area between the tires and the ground, raising friction and thus driving resistance, which increases fuel consumption. 5. Incorrect data from certain sensors: If the coolant temperature sensor indicates a lower temperature or the oxygen sensor shows excessive oxygen content, the computer may control to inject more fuel, ultimately leading to incomplete combustion and increased fuel consumption. 6. Excessive carbon buildup in the vehicle: Carbon deposits can accumulate in the throttle body, fuel injectors, intake manifold, and piston tops. Excessive carbon deposits in any of these areas can lead to incomplete combustion, thereby increasing fuel consumption.

10

4

Share

Should the turn signal be moved up or down for a left turn?

When making a left turn, the turn signal should be moved downward. Situations requiring turn signals: 1. Activate the left turn signal when preparing to start moving. 2. When overtaking on a road without a center line, turn on the left turn signal, and after completing the overtake, use the right turn signal to return to the lane. 3. For a left turn, activate the left turn signal; for a right turn, activate the right turn signal. Before entering a highway, turn on the left turn signal, and before exiting, activate the right turn signal. Additional information on turn signals: Turn signals are warning lights used by motor vehicles to alert surrounding vehicles and pedestrians to yield when turning. When activated, the turn signal will flash repeatedly.

20

4

Share

What does ALC mean in cars?

Active Lane Control (ALC) is an industry-first technology pioneered by Infiniti. It utilizes a front-mounted camera to monitor lane markings and employs steer-by-wire technology along with lane departure correction systems to actively maintain the vehicle within its driving lane. This helps mitigate the effects of road gradients or crosswinds on vehicle handling, significantly enhancing driving stability and safety. Here are additional details: 1. The ALC technology works in conjunction with DAS (Direct Adaptive Steering) steer-by-wire system to make subtle adjustments to wheel direction, using nearly imperceptible steering inputs to keep the vehicle centered in its lane. 2. Unlike traditional lane keeping systems that rely on slight braking of single-side wheels, ALC technology adjusts wheel direction through DAS steer-by-wire system, which neither increases fuel consumption nor causes brake pad wear. 3. ALC technology not only minimizes the risk of lane departure hazards but also enhances driving comfort in Infiniti Q50 models.

1

Share

The Difference Between Auto Hold and P Gear?

Differences are as follows: 1. Auto Hold: Refers to an automatic braking function. After activating this function, for example, when stopping at a traffic light, it is equivalent to not needing to pull the handbrake, simplifying operations by avoiding the use of the handbrake or electronic handbrake. For automatic transmission models, it also eliminates the need for frequent switching between D to N or D to P. 2. P Gear: It generates braking by locking the ratchet on the transmission shaft with internal steel claws inside the gearbox. Extended Knowledge: 1. Electronic Handbrake: The ordinary electronic handbrake P uses a computer to control the motor to clamp or release the handbrake. It replaces the lever with a button P and, of course, discards the long steel cable. The electronic handbrake is a clamping device controlled by a motor, utilizing the self-locking property of the screw. 2. Mechanical Handbrake: It uses the principle of a lever to tighten the drum brake shoes inside the rear wheels through a steel cable, preventing the rear wheels from turning. This is the traditional handbrake—braking the rear wheels, once tightened, it does not release, functioning entirely mechanically.

14

3

Share

Where to Replace a Lost Vehicle Title Certificate?

The lost vehicle title certificate needs to be replaced at the local vehicle management office (DMV). When applying for a replacement of the motor vehicle registration certificate, the owner must handle it in person, and the vehicle must be inspected on-site. According to the "Motor Vehicle Registration Regulations": 1. Applications can be made for the following changes: changing the vehicle body color; replacing the engine; replacing the body or frame; replacing the entire vehicle due to quality issues; changing the use nature of the vehicle (e.g., converting a commercial vehicle to a private vehicle or vice versa); relocating the vehicle owner's residence into or out of the jurisdiction of the vehicle management office. 2. The traffic management department of the public security authority may issue warnings or fines for the following violations: failure to paint enlarged license plate numbers on the rear of heavy or medium-duty trucks and their trailers as required, or unclear enlarged plate numbers; applying markings or advertisements on the vehicle body that affect safe driving; failure to install side and rear underrun protection devices or apply reflective markings on trucks and trailers as required; failure to conduct safety technical inspections within the specified period; changing the vehicle body color, replacing the engine, body, or frame without completing the change registration within the time limit specified in Article 10; failure by the new owner to complete the transfer registration within the time limit specified in Article 18 after the vehicle ownership is transferred; failure by the vehicle owner to apply for vehicle re-registration at the local vehicle management office within the time limit specified in Article 13 after the vehicle records are transferred out from the original registration office.

10

3

Share

What is the condition of a car with 160,000 kilometers?

A car with 160,000 kilometers is not considered old, but its condition needs to be assessed based on actual circumstances. Here are some tips for evaluating a car's condition: 1. Exterior: The degree of paint coverage on plastic and metal parts varies, and some color difference is normal. If the difference is visible to the naked eye, it indicates poor paint quality. Uneven gaps in areas like door seams, both sides of the engine hood, and bumper connections suggest poor craftsmanship. 2. Interior: First, adjust the seat and steering wheel to your most comfortable position and check if the driving angle feels natural. Pay attention to the center console, which is the most frequently used area by the driver. It should not only look good but also have logically placed buttons for ease of use. 3. Space: Rear seat space is a major concern for many buyers. Generally, the space around the knees and head is a standard for judging whether the rear is spacious enough, though this mainly applies to hatchbacks and some sporty sedans. 4. Engine: The engine is the main source of vibration and noise in a car. Poor wiring can lead to excessive noise and even fire hazards. When inspecting under the hood, don’t just check the engine plate—also examine whether the wiring is neat and if all pipes are securely wrapped.

4

5

Share

What Causes Truck Shaking During Startup?

What Are the Reasons for High Fuel Consumption in Wuling Vehicles?

Should the turn signal be moved up or down for a left turn?

What does ALC mean in cars?

The Difference Between Auto Hold and P Gear?

Where to Replace a Lost Vehicle Title Certificate?

What is the condition of a car with 160,000 kilometers?

Why does the Nissan Sylphy's wiper sometimes work and sometimes not?

Can I drive on the highway without applying for ETC in the future?

Is Tesla's Heat Insulation Film Effective?

What is the displacement of the Fit?