···
Log in / Register

What Causes Transmission Locking?

1 Answers
Willow
08/31/25 4:25am
Transmission locking is caused by excessive oil temperature due to water ingress into the transmission or power supply issues with the transmission control unit. Below are detailed explanations and solutions: Faulty Sensor Readings: The sensors in the transmission play a critical role during operation by transmitting data. If these sensors malfunction, the transmission will automatically lock into a specific gear. In such cases, professional automotive repair services should be consulted for diagnostics and repairs. Transmission Control Unit Power Supply Issues: The startup and operational systems of the transmission are controlled by the transmission control unit. If this unit loses power, it can result in transmission locking. Immediate recharging of the unit is recommended in such scenarios.
Was this review help?
12
1
Share
More Forum Discussions

How long after obtaining a car driver's license can I apply for a motorcycle license?

You must complete a one-year probationary period before applying for a motorcycle license. Below is relevant information: 1. License application interval: You must wait one full year after the probationary period ends to apply for a motorcycle license. Additionally, you must not accumulate more than 12 penalty points during that year. 2. License types: A C1 license only permits driving four-wheeled vehicles. To obtain a motorcycle license, you must upgrade your C1 license by adding either D, E, or F class (note that F class is only for lightweight motorcycles). 3. Important notes for license upgrades: When applying for and taking the upgrade exam, you must bring your ID card and previously obtained driver's license. Successful candidates will receive the upgraded license. License upgrades require local household registration in the jurisdiction where you're applying, and the issuing authority of your current license must also be local. Applications will be rejected if you lack local household registration or a locally issued license.
13
3
Share

Should You Adjust the Seat or Fasten the Seat Belt First in Subject Two?

First, adjust the seat and rearview mirror to the appropriate positions, then fasten the seat belt. Below are the relevant requirements: 1. Starting requirements: Failing to fasten the seat belt when starting results in disqualification; not using the turn signal when starting deducts 10 points; starting with the door open or not fully closed results in disqualification. Reversing into the garage requirements: Not following the specified route or sequence results in disqualification; the vehicle body crossing the line results in disqualification; failing to fully reverse into the garage results in disqualification; stopping midway results in disqualification; exceeding 4 minutes results in disqualification. 2. Parallel parking requirements: Added stopping midway or rolling results in disqualification; removed hitting or scraping the poles results in disqualification, as the new field standards have replaced the poles in the parallel parking area with solid yellow lines. Pressing or sweeping the line results in disqualification. Failing to use the turn signal after stopping and starting results in disqualification.
14
1
Share

Which has larger blind spots, SUVs or sedans?

SUVs have larger front blind spots compared to sedans, but smaller rear blind spots. Here are some expanded details: 1. Front of the vehicle: SUV models are taller than sedans, so the window line and hood of an SUV are also higher. If you connect and extend the SUV driver's line of sight with the hood, you'll find this line is longer than that of a sedan. If low obstacles appear in front of both a sedan and an SUV, the sedan driver would spot them more easily while the SUV driver might have more difficulty noticing them. 2. Rear of the vehicle: Due to their taller body, SUVs actually have smaller blind spots in some aspects - the rear blind spot is smaller than that of sedans. The rear windshield of SUVs is basically vertical in shape and has a larger surface area than sedans. Additionally, SUVs don't have the "third compartment" that sedans have, so rear visibility is significantly better in SUVs compared to sedans.
1
4
Share

When Can I Get the Vehicle License?

There are mainly the following situations for obtaining the vehicle license: 1. In the past: The back of the main page of the vehicle license had a photo of the vehicle. Taking the vehicle photo required the vehicle to have license plates mounted, so in the past, one had to wait until the license plates were obtained before getting the vehicle license. 2. Now: The traffic management department uses photo editing to digitally place the license plate chosen by the owner onto the vehicle photo, allowing the vehicle license to be obtained even before the physical license plates are manufactured. Here is some additional information: 1. Introduction: The motor vehicle license is the legal document permitting the vehicle to drive on roads within China. 2. Components: The vehicle license consists of three parts: the document, the main page, and the supplementary page. The front of the main page contains the endorsed certificate core, while the back has the vehicle photo, sealed in plastic. The supplementary page is the endorsed certificate core.
6
3
Share

What is the function of the button on the Magotan gear lever?

The automatic gear lever of the Magotan is equipped with a button called the shift lock button, which prevents misoperation and potential safety hazards. This button must be pressed when shifting out of P (Park) or into R (Reverse) or P (Park). P (Park) - Parking Gear Explanation: When the gear lever is shifted into this position, the drive wheels are mechanically locked, commonly referred to as the handbrake. Additional related information is as follows: 1. R (Reverse) Gear Explanation: This gear can only be engaged after the vehicle has come to a complete stop and is used for reversing the vehicle, such as when parking in reverse or parallel parking. 2. N (Neutral) Gear Explanation: When the gear lever is moved into this position, the transmission does not engage any gear. There is no power output when shifted into this gear. If the vehicle is in this gear while moving, it is coasting, and a vehicle without power can be more passive, posing certain safety risks.
13
4
Share

How early can the 2-year inspection exemption be applied for?

2-year inspection exemption can be applied for up to three months in advance. Below is detailed information about vehicle annual inspections: 1. Passenger vehicles for commercial use: Passenger vehicles for commercial use must be inspected once a year within the first 5 years, and once every 6 months after exceeding 5 years. 2. Trucks and large/medium-sized non-commercial passenger vehicles: Trucks and large/medium-sized non-commercial passenger vehicles must be inspected once a year within the first 10 years, and once every 6 months after exceeding 10 years. 3. Small and mini non-commercial passenger vehicles: Small and mini non-commercial passenger vehicles are exempt from inspection for the first 6 years, requiring only a biennial inspection label application. Starting from November 20, 2020, vehicles older than 6 years but less than 10 years will be inspected once every two years instead of annually. Vehicles older than 10 years must be inspected once a year, and those older than 15 years must be inspected once every 6 months.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.