What Causes the Yellow Engine Light to Illuminate?

What transmission is used in the Geely Emgrand?

Geely Emgrand's transmission is supplied by Punch Powertrain, a Belgium-based company headquartered in Sint-Truiden. Punch Powertrain is a provider of energy-efficient powertrain systems, with over 50 years of experience in the design and production of continuously variable transmissions (CVT). The company also specializes in the development, production, and supply of hybrid powertrains (48V and plug-in hybrid PHEV) and dual-clutch transmissions (DCT), along with their components. The CVT transmission in the Emgrand is the Punch VT2 automatic transmission, which can handle a maximum power of 98 kW and a maximum torque of 170 Nm. This transmission is widely used, with five product variants (VT1-VT5) designed for different torque capacities. It is employed by several domestic brands, including Geely Emgrand, Soueast Motor, Haima Automobile, and Hawtai Motor. When using the Geely Emgrand's transmission, the following points should be noted: 1. Do not delay transmission fluid changes for extended periods. While many modern transmissions claim to be maintenance-free, this does not mean the fluid never needs replacement. Prolonged use without changing the fluid can damage internal components such as bearings and housings. 2. Avoid coasting in neutral for long durations. While "experienced" drivers of manual transmissions may coast in neutral, doing so in an automatic transmission can cause overheating. Additionally, shifting back into Drive (D) from neutral may result in harsh engagement. 3. Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers attempt to showcase "smooth" operation by shifting gears prematurely, but this practice can severely damage transmission gears and lead to grinding or other failures over time. 4. Avoid frequently climbing steep slopes in Drive (D). Automatic transmissions may overheat under high loads or upshift prematurely, reducing climbing power. In such situations, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. 5. Do not tow the vehicle over long distances. If the automatic transmission vehicle breaks down, use a flatbed tow truck to transport it while in Neutral (N). Towing with a rope or dragging the vehicle directly is not recommended.

12

2

Share

Should You Use Cold or Warm Air to Defog Car Windows?

Both cold and warm air can be used to defog car windows, but warm air is slower than cold air. The most effective method is using cold air, which blows dry cold air directly onto the glass, preventing water vapor from condensing and achieving defogging. The method of using warm air is similar to cold air defogging, but it's important to note that warm air should not be used on rainy days as it may initially worsen the fog. When defogging car windows, the external air circulation should be turned on. The reason for car window fogging: There is a temperature difference between the inside and outside of the car. If the temperatures inside and outside the car are different, the side with the lower temperature will have a lower saturation vapor pressure on its surface compared to the surrounding environment, causing water vapor to accumulate on the glass surface in the form of tiny droplets, forming fog. Methods to defog car windows: Air Conditioning Cooling: Use the air conditioning's dehumidification function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car without turning on the air conditioning promptly, the high humidity from exhaled breath can quickly cause the windshield to fog up. Turning on the air conditioning to blow cold air onto the windshield and using the dehumidification function can quickly remove the fog. If the humidity is too high and the air conditioning is not effective, slightly opening a window can quickly reduce the humidity inside the car. Combining both methods can yield faster results. Air Conditioning Heating: Use warm air to reduce the temperature difference and remove fog. In winter, blowing warm air onto the glass quickly raises the temperature of the front windshield, reducing the temperature difference between the inside and outside surfaces and preventing heavy fogging. However, the rear and side windows heat up more slowly, so it takes longer to completely remove the fog. Whether the air conditioning is automatic or manual, turning it on helps with dehumidification. The temperature control should not be set to the coldest position, as this can cause the outer surface of the windshield to fog up over time. Applying Anti-Fog Spray: Spray a small amount of defogging agent on the car windows and wipe it clean to remove dirt and stains. This leaves a thin transparent protective film on the glass, effectively preventing water vapor from condensing and forming fog, especially useful in cold winters. Alternatives to anti-fog spray include dish soap, soapy water, glycerin, alcohol, or saline solution. After applying and letting it dry, wipe off any excess with a chamois or soft dry cloth to ensure the windows remain fog-free for several days. Opening Windows for Airflow: If the fog inside the car is not too heavy, opening the side windows can create airflow between the inside and outside of the car, reducing the temperature difference and gradually eliminating the fog. The principle is the same as using cold air from the air conditioning. However, this method has obvious drawbacks and cannot be used during rain, snow, on highways, or when the fog is heavy. Rear Window Heating: Most cars are equipped with a rear window heating function, though the button location may vary. Turning on the rear window heating switch will usually clear the fog within about a minute.

18

0

Share

Where is the 9-digit engine number located?

The engine number is generally found on the outer surface of the engine block, or on the vehicle's nameplate or the nameplate inside the engine compartment. The simplest and most direct method is to check the vehicle's administrative green book or the vehicle registration certificate. The engine number, like a person's ID number, represents each vehicle and contains crucial information about the vehicle. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. It is used to indicate information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine, including fuel type, number of cylinders, displacement, and static brake power. Engines installed in passenger cars or multi-purpose vehicles are required to display the professional manufacturer, model, and production number of the engine. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's product line, and multiple engines can share the same model. The engine number, however, refers to the production number of the engine, with each engine having a unique number that cannot be duplicated. Composition of the vehicle engine number: Prefix: Includes product series code, generation symbol, and regional or corporate code, which are selected by the manufacturer as needed and must be approved and filed by the industry standardization unit. Middle section: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear section: Comprises symbols for structural features and usage characteristics. Suffix: Distinguishing symbol. When differentiation is required due to improvements or other reasons within the same product series, the manufacturer selects an appropriate symbol, and the rear section and suffix can be separated by a hyphen. Methods to check the vehicle engine number: Check the vehicle registration certificate; inspect the engine number on the motor vehicle registration certificate; look for the engine number on the purchase invoice; the factory certificate includes the engine number; the operation certificate of commercial vehicles can be used to query the engine number; check the vehicle insurance card. The engine number, composed of the prefix, middle section, rear section, and suffix, is an identification code assigned by the engine manufacturer according to relevant regulations, corporate or industry practices, and the attributes of the engine. It indicates the specific model of the vehicle, the exact production time, and the origin code information of the vehicle.

5

0

Share

What year is a vehicle if the 10th digit of the VIN is 'M'?

If the 10th digit of the VIN is 'M', it represents either the year 1991 or 2021. Below is some relevant information about VINs: 1. Composition: The Vehicle Identification Number, abbreviated as VIN, is a unique set of seventeen letters or numbers used on automobiles to identify the manufacturer, engine, chassis number, and other specifications. 2. Location of the plate: Except for trailers and motorcycles, the plate should be fixed on one of the door hinge pillar, door lock pillar, or the pillar where the door lock pillar connects, near the driver's seat.

10

0

Share

Why Do Luxury Cars Place the Battery in the Trunk?

Luxury cars place the battery in the trunk to balance the front and rear weight distribution of the vehicle. Positioning the battery at the rear helps prevent the front from becoming too heavy. If the front is too heavy, it can negatively impact the car's handling. Most luxury cars feature front-engine, rear-wheel-drive configurations, and many achieve a near-perfect 50:50 weight distribution between the front and rear. Additional information about car batteries is as follows: 1. The battery is a crucial component in a car; without it, the vehicle cannot operate normally. 2. When the engine is not running, the battery supplies power to all the electronic devices in the car.

19

3

Share

What is the difference between Audi RS and S?

Here are the specific differences between Audi RS and S: 1. Different models: S, as the name suggests, stands for SPORT, representing the performance version series of the Audi family, positioned just below RS and R. 2. Different performance: The RS series is equipped with a high-performance engine independently developed by quattro, delivering extraordinary performance and truly serving as the flagship model; while the S series is more ordinary. 3. Different prices: Compared to the S, the RS offers stronger power, richer configurations, better handling, and of course, a higher price. Naturally, the S model is also much more expensive than regular models.

7

2

Share

What Causes the Yellow Engine Light to Illuminate?

What transmission is used in the Geely Emgrand?

Should You Use Cold or Warm Air to Defog Car Windows?

Where is the 9-digit engine number located?

What year is a vehicle if the 10th digit of the VIN is 'M'?

Why Do Luxury Cars Place the Battery in the Trunk?

What is the difference between Audi RS and S?

What does the 'a' below the electronic handbrake mean?

How to start a Buick GL8 with the key?

Does a car need waxing?

What are the length, width, and height of the Highlander?