What Causes the XRv Tire Pressure Yellow Light to Illuminate Unexpectedly?

1 Answers
Helen
07/30/25 4:09am
XRv tire pressure yellow light illuminates unexpectedly for the following reasons: Abnormal tire pressure: Generally, an alert will trigger if the pressure is below 1.8 bar or exceeds 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring system not reset: After inflating the tires, if the tire pressure reset is not performed promptly, the system will retain the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light may illuminate. In such cases, the only solution is to replace the sensor with a new one. Method for resetting the tire pressure monitoring system: First, turn on the ignition switch and press and hold the tire pressure monitoring reset button until you hear a "beep" sound, then release. The system will store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, indicating the tire pressure reset is complete.
Was this review help?
5
4
Share
More Forum Discussions

What is the fuel consumption of Li Auto?

The comprehensive fuel consumption of Li Auto is 1.5L/100km. The above is the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, around 7.2L. When driving, the following 5 tips can help reduce fuel consumption: During the starting process of the vehicle, it should start in a low gear, gently press the accelerator, and gradually increase speed. Do not suddenly press the accelerator hard, as this will multiply fuel consumption. Light acceleration, light braking, early braking: When driving, gently press the accelerator to avoid a sudden increase in engine speed and prevent the car from shaking during driving, making the car more fuel-efficient. By anticipating road conditions and adopting slow and uniform acceleration or braking, fuel economy can be increased by up to 20%. Maintain proper tire pressure: Keep the tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or inspection of the vehicle: Timely oil changes can reduce carbon deposits (carbon deposits can cause uneven ignition, sluggish acceleration, increased fuel consumption, and in severe cases, even lead to cylinder misfires); regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body according to mileage. Close the windows while driving. Driving with windows open increases wind resistance. The greater the wind resistance, the more resistance the car encounters, requiring more power and thus increasing fuel consumption.
7
5
Share

Does the Focus engine have a protective plate?

The Focus engine does not have a protective plate. The function of an engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the fuel in a sealed cylinder, causing the expansion of gases that push the pistons to perform work. Internal combustion engines generally transform chemical energy into mechanical energy. The engine consists of: 1. Valve train; 2. Crankshaft and connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system. The Focus is a compact car with body dimensions of 4378mm in length, 1810mm in width, and 1468mm in height, a wheelbase of 2705mm, a fuel tank capacity of 53 liters, and a trunk capacity of 341 liters.
3
0
Share

What is PCS Pre-Collision?

PCS Pre-Collision refers to the automatic detection of obstacles ahead, calculating the possibility of a collision. If the system determines a high probability of collision, it will sound an alarm. PCS Pre-Collision can avoid collisions by automatically adjusting a series of safety systems, including the pre-collision brake assist system, emergency steering assist system, and vehicle dynamic integrated management system. If the system determines that a collision is unavoidable, it will pre-tighten the front seat belts and activate the brakes to minimize damage. PCS Pre-Collision consists of millimeter-wave radar, sensors, and an electronic control unit (ECU). The working principle of PCS Pre-Collision is: the millimeter-wave radar detects vehicles and obstacles ahead, the system collects and processes the information from the radar and sensors, and when the system determines a possible collision, it emits a beep and displays a warning signal to alert the driver to the danger and take timely evasive action.
10
2
Share

Will the insurance company compensate for a stolen motorcycle?

If you have purchased personal property insurance, the insurance company will compensate for a stolen motorcycle. Below are some anti-theft precautions for motorcycles: Electronic Anti-theft: Electronic anti-theft falls under the category of locks, but compared to traditional locks, it offers stronger protection against technical unlocking. Common examples include electronic chip anti-theft devices, GPS trackers, and two-way alarms. Hidden Kill Switch: Only the vehicle owner knows the specific method to activate it. Installing a kill switch allows the vehicle to start only when the switch is turned on during ignition, while it remains off at other times. Even with a key, the vehicle will not start normally.
4
1
Share

What are the reasons for the EPC light appearing in a Jetta?

The reasons for the EPC light appearing in a Jetta are: 1. Brake light malfunction; 2. Fault in the engine's throttle or wiring; 3. Brake switch damage; 4. Clutch switch damage. The solutions for the EPC light appearing in a Jetta are: 1. Restart the vehicle; 2. Clean the throttle; 3. Replace the brake light; 4. Remove carbon deposits from related parts. Taking the 2019 Jetta VS5 manual base model as an example, its body dimensions are: length 4419mm, width 1841mm, height 1616mm, with a wheelbase of 2630mm. The 2019 Jetta VS5 manual base model is equipped with a 1.4L turbocharged engine, producing a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, paired with a 5-speed manual transmission.
16
2
Share

Is Motorcycle Accident Insurance Mandatory?

Motorcycle accident insurance is not mandatory, and whether it needs to be purchased depends on the actual situation. Below is a detailed introduction to driver accident insurance: Exclusions: The insurer is not liable for compensation in cases of intentional acts by the driver, or injuries or deaths caused by braking, illness, fighting, self-harm, suicide, or criminal acts. Accidents resulting from drunk driving, driving without a valid license, or operating a vehicle without a valid registration. Concept: Driver accident insurance takes the insured's body as the subject of insurance, providing insurance benefits under the condition that the insured, as a passenger, suffers accidental injuries during transportation, leading to death, disability, or medical expenses.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.