What Causes the Window to Make Strange Noises While Driving?

2 Answers
EleanorLee
07/29/25 5:35am
Reasons for strange noises from the window while driving: Aging of the glass sealing strip: Aging of the sealing strip is often one of the reasons for resonance noises from the window glass. If it's a new car with resonance noises, there's no need to immediately replace the sealing strip. Simply purchase a lubricant online, apply it evenly on the sealing strip, and then try raising and lowering the window several times to see if the noise diminishes. If the sealing strip is severely aged, it's best to replace it directly. Debris in the window glass guide rail: The gaps in the sealing strip of the window slot can easily allow dust and particles to enter during the process of raising and lowering the glass, which can cause vibration noises from the window glass. If dust and particles accumulate more and more, they can damage the lifting motor, leading to strange noises and even affecting the lifting function.
Was this review help?
6
0
Share
Edwards
08/12/25 7:45pm
I often ponder about the strange noises coming from the car window while driving, especially on highways where the wind noise is louder, and that annoying squeaking sound is really irritating. Common causes could be the aging of the window lift motor or dust and debris accumulated in the tracks, causing them to jam. I recommend using a specialized cleaner to wipe the tracks and applying some lubricant—sometimes a simple fix can quiet it down. If left unmaintained for a long time, the sealing strips can deform, leading to air leaks, and when rainwater seeps in, the metal parts can rust, causing more severe friction. Additionally, if the internal structure of the door has loose screws, the noise will worsen on bumpy roads, requiring a professional shop to tighten or replace the parts. Prevention is better than cure; regular maintenance of the window system can save a lot of trouble and money, especially for older cars, which are more prone to this issue.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

How to use the windshield washer fluid in Mercedes GLC?

Usage of Mercedes GLC windshield washer fluid: 1. Turn on the wiper switch to spray the washer fluid; 2. When the wiper nozzles stop spraying, add a small amount of new washer fluid at the washer fluid filler port; 3. Then turn on the wiper switch again to clear the remaining old washer fluid; 4. When the nozzles stop spraying for the second time, add approximately 4L of washer fluid solution, then securely close the washer fluid cap. The Mercedes GLC has body dimensions of 4764mm in length, 1898mm in width, and 1642mm in height, with a wheelbase of 2973mm. The Mercedes GLC features front-engine four-wheel drive (4WD) with a full-time 4WD system, and both front and rear suspensions use multi-link independent suspension.
8
1
Share

Should Toyota Avalon use 92 or 95 octane gasoline?

Toyota Avalon uses 92 octane gasoline. Different octane ratings of gasoline have different octane values. The higher the octane rating, the higher the octane value, and the better the anti-knock performance of the gasoline. The Toyota Avalon is equipped with two engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. The dimensions of the Toyota Avalon are 4975 mm in length, 1850 mm in width, and 1450 mm in height, with a wheelbase of 2870 mm. The Toyota Avalon features front-wheel drive, with a front MacPherson strut independent suspension and a rear double-wishbone independent suspension, and its body structure is a unibody design.
3
0
Share

Is the Renegade a four-wheel drive vehicle?

The Renegade is a four-wheel drive vehicle. It is an SUV launched by GAC Fiat Chrysler Automobiles Sales Co., Ltd., with options for MT, 9AT, and dual-clutch transmissions. The vehicle is equipped with an intelligent four-wheel drive system that not only allows for locking the four-wheel drive but also supports torque amplification. The dimensions of the Renegade are 4240 mm in length, 1805 mm in width, and 1690 mm in height, with a wheelbase of 2570 mm. The Renegade features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. The body structure is of a unibody design.
11
0
Share

What to Pay Attention to When Driving in Summer?

Precautions for driving in summer: 1. Do not wear sunglasses that are too dark; 2. Avoid fatigue driving: high temperatures in summer can easily cause fatigue and drowsiness; 3. Prevent car spontaneous combustion; 4. Do not consume too much cold drinks; 5. Regularly check the tire pressure of the car; 6. Be extra careful when driving; 7. Avoid driving in slippers: in case of an emergency, if the slippers do not stay on the feet when stepping on the accelerator or brake, it may delay the braking time and cause a traffic accident; 8. It is not advisable to use gas lighters; 9. Do not use the air conditioning for too long: vehicles equipped with air conditioners have good sealing performance. Most people will feel dizzy, tired, and experience memory loss after staying in this environment for a few hours.
13
5
Share

What is the method to upgrade the navigation system in BYD Yuan?

BYD Yuan navigation upgrade method: The navigation system is stored on an SD card. Simply remove it and find the corresponding navigation system online. It's important to note the port parameters of the original vehicle system for the system being used. Embedded systems can only be updated through dealers or repair shops. The BYD Yuan is a compact SUV with body dimensions of 4360mm in length, 1785mm in width, and 1650mm in height, with a wheelbase of 2535mm. The BYD Yuan is equipped with two types of engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine.
10
2
Share

What is the correct method for parking an automatic transmission vehicle?

Correct method for parking an automatic transmission vehicle: 1. On level ground, after coming to a complete stop by pressing the brake, first engage the parking brake, then shift to neutral (N), slowly release the foot brake, and then quickly shift to park (P) and turn off the engine. 2. The correct operation for parking on a slope is to press the brake until the vehicle comes to a complete stop, engage the parking brake, then shift to neutral (N), and slowly release the foot brake. When releasing, you may feel the vehicle move slightly, about a few centimeters. Once the vehicle is completely stationary, shift to park (P). When parking, it is recommended to follow the standard procedure: shift to neutral first, engage the parking brake, then shift to park (P). Additionally, when waiting at a traffic light, never shift to park (P) to prevent potential rear-end collisions that could damage the transmission.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.