What causes the VSA light to illuminate in the Guangqi Honda Accord?

1 Answers
DiOmar
07/29/25 11:24pm
Guangqi Honda Accord's VSA light illuminates due to a fault in the electronic stability control system. Below are specific details about the Accord: 1. Vehicle Positioning: The Honda Accord is a mid-size sedan under Guangqi Honda, available in both gasoline and hybrid versions. It measures 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm. 2. Configuration: The Accord emphasizes safety performance, featuring a standard VSA system and front seat side airbags. 3. Powertrain: The Accord is equipped with i-VTEC and VTEC engines. The i-VTEC engine combines Honda's VTEC (Variable Valve Timing and Lift Electronic Control) technology with the VTC (Variable Timing Control) technology that continuously adjusts valve timing across different engine speeds, delivering strong torque output and sharp acceleration. Through the ECU (Electronic Control Unit), it controls the opening and closing of intake and exhaust valves to maintain optimal combustion, achieving an ideal balance of high power output, low fuel consumption, and clean emissions.
Was this review help?
11
3
Share
More Forum Discussions

What Causes the Abnormal Noise When Turning the Steering Wheel While Stationary in a New Car?

New cars producing abnormal noises when turning the steering wheel while stationary can be attributed to sounds from the shock absorber top bearing, the stabilizer bar, the steering column dust cover, or interference from the clock spring. Noise from the shock absorber top bearing: If a noise occurs when gently shaking the steering wheel while stationary, it is likely due to insufficient lubrication in the shock absorber's top bearing. To confirm, open the hood and listen if the sound originates from the shock absorber's top mount. Applying grease to the top bearing may resolve the issue; if the noise persists, replacement is necessary. Noise from the stabilizer bar: If the noise is not from the shock absorber, check the stabilizer bar bushings for looseness or damage. Loose or damaged stabilizer bar bushings can cause noises not only when turning the steering wheel but also when driving on uneven roads. Loose bushings can be fixed by adding shims, while damaged ones require replacement. Noise from the steering column dust cover: Inspect the steering column dust cover. A lack of lubrication in the dust cover can cause dry friction noises. Applying grease inside the dust cover should eliminate the noise. Noise from clock spring interference: If the noise comes from within the steering wheel while turning, it may be due to interference from the clock spring. Remove the steering wheel and apply grease to the clock spring. If the noise continues, replacing the clock spring is the only solution.
16
5
Share

What are the insurance company's standards for headlight replacement?

Headlights can only be replaced if the mounting tabs are broken or if the lens housing is damaged. Additional details are as follows: 1. Overview: Vehicle insurance, also known as auto insurance or motor insurance, refers to a type of commercial insurance that covers liability for personal injury or property damage caused by natural disasters or accidents involving motor vehicles. 2. Other Information: Auto insurance is a category of property insurance. Within the property insurance sector, auto insurance is a relatively young line of coverage. In its early stages, auto insurance primarily focused on third-party liability coverage and gradually expanded to include risks such as collision damage to the vehicle body.
5
2
Share

Which gear should the Geely Vision X3 automatic transmission use for climbing slopes?

Geely Vision X3 automatic transmission should use the S gear for climbing slopes. Below are the gear explanations for the Geely Vision X3: 1. P (Parking gear). When the gear lever is in this position, the drive wheels are mechanically locked, and the engine can be started. To shift from Parking gear (P) to Drive gear (D) or Reverse gear (R), the brake pedal must be pressed, and the gear unlock button must be pressed. 2. R (Reverse gear), the gear for moving backward. When the vehicle is stationary, to shift from Reverse gear (R) to Parking gear (P), simply press the unlock button on the gear lever without stepping on the brake pedal. Shifting from Reverse gear (R) to Neutral gear (N) or Drive gear (D) does not require pressing the unlock button or stepping on the brake pedal. 3. N (Neutral gear). When the gear lever is in this position, the transmission idles, and the engine power cannot be transmitted to the drive wheels, nor can it provide engine braking. 4. D (Drive gear), the normal driving gear (automatic transmission). When the vehicle is stationary and the ignition switch is in the ON position, to shift from Drive gear (D) to Reverse gear (R) or Parking gear (P), press the gear unlock button and step on the brake pedal. To shift to Neutral gear (N), simply push the gear lever. When the vehicle is moving, to shift from Drive gear (D) to Neutral gear (N), simply push the gear lever.
1
0
Share

Can the leather under the car window be repaired?

The leather under the car window can be repaired, and the repair method varies depending on the extent of the leather damage. If it is just a small crack, you can use leather repair fluid to fix it. Lay the leather flat on a workbench, align the crack, apply the appropriate leather repair fluid, and then dry it with a hair dryer. If the crack is large, take a piece of leather or non-woven fabric that matches the softness of the damaged leather for repair. Lay the leather flat on a workbench, cut a piece of leather or non-woven fabric larger than the crack, place it under the damaged area, and bond it with leather adhesive. Finally, cover it with a piece of cotton cloth and use an iron to set it. Methods for maintaining car interior leather: Use car leather maintenance oil. Car leather maintenance oil has penetrating and moisturizing effects, providing deep and long-lasting protection for genuine leather. It keeps leather products soft and maintains their natural color, effectively preventing aging, cracking, and discoloration. It is also waterproof, mold-proof, and enhances the gloss of car leather. The application method is simple: spray or apply the maintenance oil evenly on the leather with a cotton cloth, then polish it with a white cloth. Use seat covers. Seat covers can protect car leather. As long as the seat covers are well-maintained, the car leather will not suffer significant damage. However, car owners should still regularly maintain the interior leather, clean the seat cushions, and remove surface dirt from the leather interior.
8
0
Share

What number should I call if my car is blocked?

You can call the contact information left by the car owner on the front windshield. Alternatively, dial 110 or 122 (traffic police hotline), provide the license plate number of the obstructing vehicle, and the traffic police will contact the owner to request moving the vehicle. For violations of road traffic laws regarding illegal parking, if the driver is present, the traffic police may point out the violation, issue a verbal warning, and instruct the driver to leave immediately. Generally, the driver only needs to move the vehicle promptly without facing a fine. However, if the driver refuses to leave and the parked vehicle obstructs other vehicles or pedestrians, the traffic police may impose a fine ranging from 20 to 200 yuan. If the driver is not present, in addition to issuing a fine, the traffic police department has the authority to tow the vehicle to a location that does not obstruct traffic or to a designated parking area by the traffic management authorities, especially if the parked vehicle is causing obstruction.
16
2
Share

What do Mercedes-Benz S, E, and C stand for?

Mercedes-Benz's S-Class, E-Class, and C-Class are used to differentiate their levels and orientations. The S-Class focuses on luxury, the E-Class on comfort, and the C-Class on sportiness. The differences among them are as follows: 1. Different positioning: The E-Class is considered a mid-to-high-level car in the Mercedes-Benz lineup, the S-Class is the top-tier luxury car, while the C-Class is a compact sedan. The S-Class emphasizes luxury, the E-Class focuses on comfort, and the C-Class highlights sportiness. 2. Different appearances: The E-Class has softer side lines with a cigar-shaped waistline; the S-Class features triangular headlights, giving it the most aggressive look, with more inclined rear lines, the longest body length, and the highest height; the C-Class has the smoothest lines and the most sporty feel, appearing sharper and more suitable for younger people.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.