What causes the vehicle's water temperature to be too high?

1 Answers
Baker
07/24/25 6:08am
The reasons for the vehicle's water temperature being too high are: 1. Insufficient coolant; 2. The radiator is too dirty; 3. The thermostat is faulty; 4. The electric fan is faulty. If the water temperature is high due to reasons other than these four situations, it is recommended that the owner directly call a tow truck to send the car to a 4S shop for inspection and repair. Methods to prevent the water temperature from being too high during daily use of the vehicle: 1. Regularly check or replace the coolant, as excessively high water temperature can easily cause various faults in the vehicle and even damage the engine; 2. Regularly remove dust from the radiator and engine compartment. While the vehicle is moving, the high-speed wind hitting the front can help dissipate heat from the radiator's surface. If there is too much dust on the radiator's surface, the cooling effect during driving will be reduced, which may eventually lead to excessively high water temperature.
Was this review help?
5
5
Share
More Forum Discussions

What brand are the original tires of Wuling Hongguang?

The original tire brand of Wuling Hongguang is Linglong Tires. Here is relevant information: 1. Tire Introduction: Tires are very important components of motor vehicles, being the only parts that come into contact with the road surface, playing a crucial role. When replacing tires on motor vehicles, it is necessary to use tires of the same model as the original ones to ensure stable driving. 2. Regularly Adjust Wheel Balance: Excessive wheel imbalance can cause high-frequency vibrations at high speeds, leading to uneven tire wear and compromising driving safety. After tire repairs, dynamic balance testing and adjustment should be performed, with the single-side dynamic balance test value not exceeding 40 grams. 3. Regularly Rotate Tires: To ensure even tire wear on the same vehicle, tires should be rotated every 5,000 kilometers, and a four-wheel alignment should be performed every 5,000 to 10,000 kilometers to prevent abnormal excessive tire wear. It is not allowed to install tires of different models or with significant differences in wear on the same axle.
2
3
Share

What is the fuel consumption of the CFMOTO 650NK?

The comprehensive fuel consumption per 100 kilometers of the 650NK is around 6L. 1. Exterior: The vehicle's graphics design adopts a new color scheme, making it more sporty compared to the older models. The body's detailing features sharper lines, with a more pronounced three-dimensional effect. The instrument cluster has also been upgraded to a 5-inch TFT full-color display, offering richer functionality and information display. It also features two different driving style modes and can automatically adjust screen brightness based on ambient light. 2. Powertrain: The powertrain now includes the latest slipper clutch, ensuring smoother gear shifting and acceleration, while also making the clutch lever operation lighter. Additionally, the tires have undergone a significant upgrade, using imported Pirelli Angel ST tires, which provide excellent grip performance. 3. Chassis: The chassis design of this model has also seen excellent improvements. The seat height has been lowered to 780mm, and the rear suspension (KYB) now features adjustable functionality, allowing for a 20mm range of adjustment. This makes it easier for riders as short as 165cm to plant both feet on the ground. Compared to the previous 815mm seat height, the new version of the CFMOTO 650NK caters to a broader range of riders.
2
5
Share

What does a wrench indicator on the car dashboard mean?

Car dashboard wrench indicator means: The car has reached the maintenance interval and should be serviced at a 4S shop. After maintenance at the 4S shop, this indicator will disappear. Extended knowledge: 1. Meaning of the wrench symbol: The appearance of a "small wrench" on the dashboard does not indicate a vehicle malfunction; it is merely a maintenance reminder. 2. Function of the wrench symbol: The vehicle's maintenance cycle is preset during manufacturing, so the "small wrench" appears every certain mileage to remind the driver to perform timely maintenance. 3. Vehicle maintenance cycle: The car's maintenance interval is every 5,000–8,000 kilometers driven.
19
4
Share

Where is the Avalon produced?

Asian Dragon is produced at Toyota's manufacturing plant located in Georgetown, Kentucky, USA. Precautions during the break-in period for the Avalon: Avoid emergency braking: This prevents damage to the braking system during the break-in period and reduces impact on the engine and transmission components. Do not drive at high speeds. Avoid overloading: Excessive cargo can accelerate wear on mechanical parts. Use high-quality fuel. Preheat the engine during cold starts. How to use the Avalon's one-touch start feature: Start/Stop the engine: To start, press the brake pedal and push the one-touch start button; to stop, ensure the vehicle is stationary and press the ignition switch again. Turn on/off the power: To turn on, simply press the ignition switch without stepping on the brake pedal; to turn off, press the ignition switch again.
19
2
Share

Where is the power connection location for a dash cam?

There are four possible connection locations: 1. Cigarette lighter connection: This is the simplest method - directly plug into the cigarette lighter socket. After obtaining power, route the wire through areas like the glove compartment or A-pillar. This method occupies the cigarette lighter socket, and since the wiring in the glove compartment area cannot be completely hidden, there will be some exposed wiring. However, the advantage is that you can manually turn the dash cam on/off by simply unplugging the cigarette lighter or pressing its switch. 2. Direct battery connection: This requires running wires from the cabin through to the engine compartment to connect directly to the battery terminals. This method doesn't allow convenient manual power shutoff and may risk battery over-discharge. The A-pillar must be used to conceal exposed wiring. 3. ACC power connection: There's usually a secondary fuse box under the steering wheel. Locate the ACC fuse and insert a "fuse tap connector" into it (refer to your owner's manual for the correct fuse number). This method doesn't affect the vehicle's original electrical system. The dash cam powers on when the vehicle's main power is activated. The A-pillar must also be used here to hide exposed wiring. 4. Dome light connection: If your dome light has independent power (can be turned on separately when the engine is off and vehicle locked), you can draw power from it using a voltage step-down converter (power adapter). This method offers the shortest wiring distance and best concealment. The converter monitors system voltage and automatically supplies power when voltage exceeds 14V (engine running).
12
1
Share

Which tire model is used on the Changan CS35?

The tire specification for the Changan CS35 is 215/50/R17, and any tire that meets this size can be used. The advantages of this tire model: its greatest strength is not in wear resistance, but in the balance of quietness, grip, and fuel efficiency, offering high cost performance. Here is some related information about tires: 1. Tires need timely replacement: Tires are rubber products, and prolonged use will cause aging and wear, so they need to be replaced periodically. If not replaced for a long time, it will affect the driving stability and safety of the vehicle. Under normal conditions, car tires should be replaced every four years. 2. Points to note when purchasing new tires: When buying new tires, always check the production date, as tires generally have a shelf life. Normally, stored tires have a shelf life of three years. If the tires have been in storage for more than three years, do not purchase them.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.