What Causes the Unusual Noise When Braking in a Bora?

1 Answers
Gene
07/29/25 6:59pm
Reasons for unusual noise when braking in a Bora: 1. The brake discs or pads may have rust or hard spots causing the noise, which usually occurs when the vehicle first starts moving and improves after a few brake applications; 2. The suspension system or pressure bearings may produce noise due to cold weather hardening the rubber components, leading to noise when braking under force, which improves after the car warms up; 3. A faulty brake caliper. The braking performance of a car is determined by the brake pads, so it's essential to maintain them properly. When the brake pads wear down to a certain extent, they need to be replaced promptly. Under normal urban driving conditions, the lifespan of brake pads is approximately 30,000 kilometers.
Was this review help?
18
2
Share
More Forum Discussions

Does a Nail Puncture Require Tire Replacement?

Generally, a nail puncture does not necessitate tire replacement. If the nail has not penetrated the sidewall but only the tread, and hasn't fully punctured the tire, the nail can simply be removed—though this should be assessed by a professional, and it's advisable for car owners not to remove the nail themselves. If the nail has fully punctured the tire, a repair is needed. Below are details regarding nail punctures in tires: 1. Puncture Depth: When the tread puncture is only 6mm, for cost-effectiveness, a simple patch repair is sufficient, and the tire can continue to be used without replacement. This is because a nail insertion does not severely damage the tire's structure—the steel belts, fabric layers, and polyester layers merely sustain a small hole that can be patched. Of course, replacing the tire is safer, with the damaged tire then serving as a spare. 2. Minor Tread Damage: Repairs are possible. Given China's complex road conditions—uneven surfaces and frequent debris—tread damage is common. Minor tread damage can be repaired to extend the tire's lifespan. If the tread pattern is peeling, repairs may not help, but the tire can still be used if the damage isn't severe. However, for high-speed driving or for owners who prioritize safety, replacement is recommended. 3. Severe Tread Deformation or Carcass Damage: Replacement is mandatory. Tread deformation often results from carcass damage. When the carcass undergoes significant stress, its internal structure is compromised, leading to deformation and rendering the tire unusable.
20
0
Share

Is Removing the Cylinder Head Considered a Major Overhaul?

Simply removing the cylinder head to inspect the cylinder block is not considered a major overhaul. However, replacing components such as the crankshaft, connecting rods, and pistons is regarded as a major overhaul. A car's engine is not a single unit but is composed of several parts. From top to bottom, the engine consists of the valve cover, cylinder head, cylinder block, and oil pan, with sealing gaskets between these parts. Therefore, it is essential to perform regular maintenance on your car. Below is an introduction to car maintenance: 1. Introduction to Car Maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Scope of Car Maintenance: Modern car maintenance mainly includes the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance areas. 3. Purpose of Car Maintenance: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
16
5
Share

What is the difference between the luxury and sport versions of the BMW 5 Series?

The differences between the luxury and sport versions of the BMW 5 Series are: 1. Different tires: The luxury version is equipped with Hankook Ventus S1 tires, while the sport version comes with Bridgestone Turanza tires. 2. Different designs: The luxury version does not have air intakes, while the sport version does. In terms of interior, the luxury version features a more premium steering wheel, while the sport version has a simpler steering wheel design and includes additional sporty trim elements. Visually, the luxury version appears more refined and business-oriented, whereas the sport version, with its added sporty trim, offers a more dynamic and youthful exterior appearance.
18
2
Share

What Causes High Engine Oil Temperature in BMW 5 Series?

BMW 5 Series high engine oil temperature is caused by poor working condition of the oil cooler, which can be resolved by replacing it with a new one. Engine oil is referred to as the lifeblood of the engine. Without engine oil, the engine cannot operate normally. The functions of engine oil include lubrication, cleaning, sealing, buffering, rust prevention, and heat dissipation. When purchasing an oil filter, it is essential to choose genuine products from reputable brands, as inferior oil filters cannot thoroughly filter the engine oil. The BMW 5 Series is a mid-size luxury sedan under the BMW brand, with a body length of 4998 mm, width of 1901 mm, and height of 1559 mm. It is equipped with either a low-power version or a high-power version of a 2.0-liter turbocharged engine.
4
4
Share

How to Turn on the Heating in a BMW 5 Series?

Method to activate the heating in a BMW 5 Series: 1. Let the engine idle until the coolant temperature rises to the normal operating temperature of 90 degrees; 2. Press the large fan buttons on both the driver and passenger sides to increase airflow, which simultaneously activates the air conditioning system; 3. Rotate the temperature control knobs on the driver and passenger sides to the red zone to turn on the heating. The heating control is displayed as a thermometer or marked with red and blue colors on both sides. Turning the knob toward the red zone gradually increases the temperature. In terms of exterior design, the BMW 5 Series features a distinctive two-tier front grille and the iconic emblem positioned above the dual kidney grilles, creating an elegant and luxurious style. The bold headlights on both sides, with their double-LED daytime running lights and angular design, enhance the three-dimensional appeal. The domestically produced 5 Series is a premium sedan with a body length of 4998 mm, width of 1901 mm, and height of 1559 mm.
11
5
Share

What is the difference between BMW 740i and 740Li?

BMW 740i and 740Li differ in body dimensions: The 740i measures 5250mm in length, 1902mm in width, and 1498mm in height; the 740Li measures 5212mm in length, 1902mm in width, and 1478mm in height. The 740i is the standard wheelbase version, while the 740Li is the long wheelbase version. The BMW 740Li is a mid-range model in the BMW 7 Series, equipped with a 3.0-liter 6-cylinder turbocharged engine producing a maximum horsepower of 340 hp, a maximum power of 250 kW, and a maximum torque of 450 Nm. In terms of fuel consumption, according to the MIIT comprehensive fuel consumption data, the BMW 740Li has a combined fuel consumption of 7.5L.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.