What Causes the Unstable Idling Speed of Wuling Hongguang?

How to Cancel the Car Maintenance Reminder?

To cancel the car maintenance reminder, follow these steps: 1. Turn the ignition key to the "ON" position without starting the engine; 2. Press and hold the reset button on the right side with your left hand; 3. Turn off the ignition key and wait until the dashboard screen goes completely black, then turn the key to the "ON" position again; 4. Release the reset button when the maintenance reminder disappears automatically. The benefits of car maintenance include: 1. Ensuring the vehicle operates in optimal condition; 2. Improving vehicle efficiency and reducing wear on parts and tires; 3. Enhancing driving safety; 4. Preventing potential hazards caused by vehicle malfunctions; 5. Reducing noise and environmental pollution; 6. Maintaining a clean and damage-free vehicle appearance.

20

0

Share

What Causes the Shaking When Releasing the Accelerator?

The shaking when releasing the accelerator is caused by: mismatched engine and transmission, clutch issues, or gaps created by loose ball joints in the steering linkage. Precautions when pressing the accelerator include: 1. Press and release the accelerator pedal gently and smoothly; 2. Coordinate the release of the clutch with pressing the accelerator promptly and precisely; 3. Select the appropriate gear to keep the engine running mostly at medium speed and with a larger throttle opening to save fuel; 4. Before stopping or turning off the engine, release the accelerator pedal first and avoid revving the engine abruptly. The working principle of the accelerator is: pressing the accelerator pedal directly controls the throttle, increasing the throttle opening, which allows more air into the engine. The ECU then commands the fuel injection system to inject more fuel, increasing the engine's RPM and accelerating the vehicle.

18

0

Share

What is the reason for the severe shaking of the Audi A6L when starting cold?

The reason for the severe shaking of the Audi A6L when starting cold is: excessive carbon deposits on the valves, which leads to insufficient air intake when the engine is cold, resulting in poor combustion in the cylinders and causing engine shaking and unstable idle speed. Taking the 2020 Audi A6L as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase 3024mm, and fuel tank capacity 73l. The 2020 Audi A6L has a front suspension of five-link independent suspension and a rear suspension of five-link independent suspension. It is equipped with a 2.0l turbocharged engine, with a maximum horsepower of 190ps, maximum power of 140kw, maximum torque of 320nm, and is paired with a 7-speed dual-clutch transmission.

6

2

Share

Where is the Mazda 3's cabin air filter located?

The Mazda 3's cabin air filter is located on the passenger side. You need to remove the fuse box, and you can see the cabin air filter cover on the left. Taking the 2012 Mazda 3 as an example, it belongs to the compact car category, with body dimensions of: length 4515mm, width 1745mm, height 1465mm, wheelbase 2640mm, fuel tank capacity 55L, and curb weight 1214kg. The 2012 Mazda 3 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 107PS, maximum power of 79kW, maximum torque of 146Nm, paired with a 5-speed manual transmission.

12

4

Share

What is the reason for the constant illumination of the Mazda i-stop yellow light?

The reason for the constant illumination of the Mazda i-stop yellow light is that the automatic start-stop system has been turned off and cannot function normally. Mazda's vehicle models include: Mazda CX-3, Mazda CX-5, Mazda CX-8, Mazda 2, Mazda Axela, etc. Taking the 2020 Mazda Axela as an example, it belongs to the compact car category, with body dimensions of: length 4662mm, width 1797mm, height 1445mm, and a wheelbase of 2726mm. The 2020 Axela features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 117PS, maximum power of 86kW, maximum torque of 148Nm, and is paired with a 6-speed manual transmission.

1

4

Share

What is the working principle of a car handbrake?

Car handbrake works as follows: Brake disc transmission tension: For small cars, some handbrakes are located behind the transmission, connected to the driveshaft with a brake disc, similar to a disc brake (though some use drum brakes). The tension is transmitted through steel cables to achieve parking braking. Hydraulic auxiliary cylinder drives air valve: When the handbrake is pulled, it uses a hydraulic auxiliary cylinder to push the main hydraulic cylinder beneath the car, which then drives the air valve. After the air valve moves, it brakes the driveshaft. Electronically controlled handbrake: High-end cars use electronic control. When the handbrake is engaged, an electric traction motor activates, tightening the steel cable and locking it after the air brake is completed.

5

Share

What Causes the Unstable Idling Speed of Wuling Hongguang?

How to Cancel the Car Maintenance Reminder?

What Causes the Shaking When Releasing the Accelerator?

What is the reason for the severe shaking of the Audi A6L when starting cold?

Where is the Mazda 3's cabin air filter located?

What is the reason for the constant illumination of the Mazda i-stop yellow light?

What is the working principle of a car handbrake?

How to Adjust the Reversing Camera Alignment?

What is the reason for the screeching sound when braking with a cold engine that disappears when the engine is warm?

What is the reason for oil leakage in the CV joint of a car's half shaft?

What are the reasons for the engine yellow light on the dashboard?