What Causes the Turtle Light to Illuminate in New Energy Vehicles?

Is Modifying the Exhaust System Illegal?

Modifying the exhaust system is illegal. Definition of the Exhaust System: The exhaust system of an engine refers to the components that organize the exhaust after the turbine or afterburner. The composition and structural design of the exhaust system depend on the type and purpose of the engine and aircraft. The exhaust system includes components such as the tailpipe, thrust reverser, and muffler. The tailpipe is an essential part of the engine, while other exhaust components are installed based on the specific needs of the engine and aircraft. Functions of the Exhaust System: The exhaust pipe primarily serves to reduce vibration and noise (muffling) and minimize the pollution of harmful gases. During driving, the pressure of exhaust gases leaving the engine is high, resulting in significant noise. The exhaust pipe contains a muffler, which helps reduce noise to some extent. The automotive exhaust system also includes a "three-way catalytic converter," which reduces pollution. This device converts harmful gases such as carbon monoxide, hydrocarbons, and nitrogen oxides emitted from the vehicle's exhaust into harmless carbon dioxide, water, and nitrogen through oxidation-reduction reactions, thereby purifying the exhaust and reducing air pollution.

15

4

Share

What is the engine oil for China VI standard?

China VI standard engine oil is 5w30 semi-synthetic engine oil. Semi-synthetic engine oil: Semi-synthetic oil is one type of automotive engine oil. It is formulated using semi-synthetic base oil, specifically: internationally classified Group III base oil. This lubricant is a product derived from mineral oil through hydro-cracking purification technology, consisting of a 4:6 ratio blend of mineral oil and full synthetic oil. The purity of semi-synthetic oil is very close to that of full synthetic oil, though its cost is slightly higher than mineral oil; it serves as an ideal transitional product between mineral oil and synthetic oil. Full synthetic engine oil: Full synthetic engine oil represents the premium grade among engine oils. It is produced from ethylene or propylene dispersed from natural gas or crude oil gas, which then undergoes polymerization, catalysis, and other complex chemical reactions to form high-molecular lubricating fluids.

14

1

Share

What size wrench is used for motorcycle spark plugs?

Motorcycle spark plug installation and removal require a 17mm wrench. Steps for replacing motorcycle spark plugs: First locate the cylinder head position, find the spark plug cap, and remove it. Before removal, you can use an air gun to clean the surrounding area to prevent debris from falling into the combustion chamber through the installation hole when removing the spark plug. Use the onboard/special tool to unscrew the spark plug counterclockwise. If no dedicated removal tool is available, you can also use a wrench to turn it counterclockwise. Hand-remove the spark plug body and begin inspection and cleaning. Since onboard tools lack magnetic attraction and a fixed base, the spark plug may drop during removal. After removing the spark plug body, install the new spark plug along the original path.

16

0

Share

What is the displacement of Kawasaki motorcycles in cc?

Kawasaki motorcycles have different displacements across various series. Kawasaki H2 displacement: The Kawasaki H2 is a mechanical beast, equipped with an inline four-cylinder, 16-valve, water-cooled, supercharged fuel-injected engine. This engine has an actual displacement of 998cc, with a maximum horsepower of 210ps, a maximum power of 154KW, and a maximum torque of 140N.m. It is paired with a six-speed transmission. Kawasaki KLX150 displacement: The Kawasaki KLX150 is powered by a 144cc single-cylinder, air-cooled engine, delivering a maximum torque of 12.2 Nm and a peak output of 12Ps in extreme conditions. Thanks to the mature 5-speed chain-driven transmission system, gear shifts are smooth and seamless. Combined with Kawasaki's meticulous tuning of the transmission system, the engine and transmission are well-integrated. Just a slight twist of the throttle provides immediate power feedback, allowing riders to handle the bike effortlessly without any adaptation period after purchase.

8

2

Share

What does manufacturer model mean?

Manufacturer model is the name of the car. Detailed explanation of manufacturer model: The vehicle model should indicate the manufacturer, type, and main characteristic parameters of the car. According to the national standard, all national vehicle models should consist of Chinese Pinyin letters and Arabic numerals. This does not apply to military special vehicles (such as armored vehicles, amphibious vehicles, missile launch vehicles, etc.). The vehicle model includes the following three parts: First part - Consists of 2 or 3 Chinese Pinyin letters, which serve as the code to identify the manufacturer's name. For example: CA represents the First Automobile Works, EQ represents the Second Automobile Works, TJ represents Tianjin Automobile Works, etc.; Middle part - Consists of four Arabic numerals. The first digit represents the type of vehicle, the second and third digits represent the main characteristic parameters of various vehicles; Tail part - Divided into two sections, the front section consists of Chinese Pinyin letters, indicating the classification code for special-purpose vehicles, located in the fifth part of the product model, using three Chinese Pinyin letters that reflect the structural and usage characteristics of the vehicle. It consists of one special-purpose vehicle structural characteristic code plus two special-purpose vehicle usage characteristic codes. The usage characteristic codes are specified according to ZB/T5005.

12

2

Share

What is the highest fuel consumption for a CVT motorcycle?

The highest fuel consumption for a CVT motorcycle is three liters. The principle of CVT: The continuously variable transmission on scooters is generally a belt-type clutch (also called a clutch because it serves the dual function of connecting and disengaging the engine's power to the drive wheel, though it differs from the multi-plate wet-type constant-mesh clutch found in conventional motorcycles). It consists of a front driving pulley, a rear driven pulley, and a belt. This system also functions as a clutch. In this setup, the driving pulley rotates at the same speed as the engine output shaft. At idle, the friction plates of the rear driven pulley do not engage with the friction bowl, preventing the bike from moving forward. When the engine speed increases, the two components engage, transmitting the engine's driving force to the rear driven pulley, which propels the bike forward. Fuel-saving tips for CVT motorcycles: Speed: Generally, maintaining a speed of 40-50 km/h with an engine speed of 3,500-4,200 RPM is the most fuel-efficient. Fuel consumption increases significantly at speeds below 25 km/h or above 75 km/h. Riding habits: Aggressive acceleration or competing for quick starts greatly increases fuel consumption. Steady-speed riding saves fuel, while frequent speed changes consume more. When accelerating, do so gradually—avoid forcefully opening the throttle and then releasing it, as this wastes fuel. Road conditions: Hilly or winding roads, frequent traffic lights, and poor road surfaces increase fuel consumption, while straight, smooth asphalt roads are the most fuel-efficient.

5

2

Share

What Causes the Turtle Light to Illuminate in New Energy Vehicles?

Is Modifying the Exhaust System Illegal?

What is the engine oil for China VI standard?

What size wrench is used for motorcycle spark plugs?

What is the displacement of Kawasaki motorcycles in cc?

What does manufacturer model mean?

What is the highest fuel consumption for a CVT motorcycle?

Does the MODEL Y feature gull-wing doors?

Can I Use My Own Motorcycle for the Test?

Which gear is the fastest?

Why Does the Tank 300 Engine Compartment Have a Strong Burning Smell?