What Causes the Transmission Whine in the New Verano?

1 Answers
DeAmir
07/29/25 5:29pm
New Verano transmission whine is related to bearing wear, transmission component wear, and insufficient lubrication. Bearing Wear: Wear and damage to bearings. When bearings wear, their clearance increases, and the fit precision decreases. When bearings are damaged, abnormal noise occurs due to their inability to operate normally, which may even lead to damage to transmission components and exacerbate the issue. Transmission Component Wear: Caused by the wear of transmission components or the use of replacement parts with excessively low precision, such as gear wear or excessive clearance between new and original gears. Insufficient Lubrication: Insufficient lubrication or excessively high viscosity leading to poor lubrication. The corresponding lubricant (grease) should be replaced; otherwise, it will accelerate transmission wear and shorten its service life.
Was this review help?
19
2
Share
More Forum Discussions

What material is the radiator of the Tiggo 3 made of?

The radiator of the Tiggo 3 is made of aluminum. The car radiator refers to the heat exchanger, which is part of the vehicle's cooling system. The radiator in the engine's water cooling system consists of three parts: the inlet chamber, outlet chamber, main plate, and radiator core. The Chery Tiggo 3 is a compact SUV under the Chery brand, with dimensions of 4420mm in length, 1760mm in width, and 1670mm in height, and a wheelbase of 2510mm. In terms of configuration, this vehicle is equipped with dual front airbags, front side airbags, rear parking sensors, ABS anti-lock braking system, EBD electronic brake-force distribution, and other configurations that ensure both active and passive safety. Externally, the car features a stylish and dynamic front grille with piano black paint, newly designed eagle-eye-style headlight clusters, and dual five-spoke 17-inch aluminum alloy wheels.
16
1
Share

How to Coordinate the Throttle and Clutch When Shifting Up?

Methods for coordinating the throttle and clutch when shifting up: 1. Release the throttle; 2. Press the clutch while shifting gears with your right hand; 3. Release the clutch and immediately press the throttle to complete the upshift, then drive smoothly. Gear shifting is one of the fundamental skills of driving a motor vehicle. Proper shifting not only extends the vehicle's lifespan and saves fuel but also ensures driving safety and helps pass the driving test smoothly. Points to note when shifting up: 1. Do not look down at the gearshift while shifting, as this can easily cause the vehicle to deviate from its intended direction. If the speed is slightly high, it could lead to danger; 2. Coordinate the clutch properly when shifting. Press the clutch pedal all the way down when shifting, and after shifting, press the throttle slightly before slowly releasing the clutch to maintain a semi-engaged state until the speed stabilizes; 3. Control the speed before shifting. Increase the speed before upshifting and decrease it before downshifting; 4. Do not skip gears when shifting. Shift up or down one gear at a time, ensuring each shift is precise.
12
5
Share

What is the method for removing the left front door panel of the Lavida?

The method for removing the left front door panel of the Lavida is as follows: 1. Remove the screws at the bottom of the door—there are two for the front door and one for the rear door; 2. Use a screwdriver to pry open a gap at the bottom of the door, then pull outward with your hand, and finally lift upward to remove the door panel. Taking the 2021 Volkswagen Lavida as an example, it is a compact car with body dimensions of: length 4670mm, width 1806mm, height 1474mm, and a wheelbase of 2688mm. The 2021 Volkswagen Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
1
2
Share

How many liters of 92 gasoline can a 25 kg barrel hold?

25 kg barrel can hold 25 liters of 92 gasoline, with a mass of approximately 18.475 kg. The density of water is 1000 g/cubic decimeter. 1 cubic decimeter = 1 liter, so the capacity of a 25 kg barrel is equal to 25 liters. However, the densities of water and gasoline are different. A 25 kg barrel can hold 25 liters of water, but if filled with gasoline, it would be less than 25 liters. Formula for gasoline density: The density of gasoline = 0.739 g/ml (0.739 grams/milliliter). According to the formula: mass = volume × density, the mass of gasoline is approximately 18.475 kg. Concepts of volume and capacity: Volume and capacity are not the same concept. If 25 kg of water is converted to a capacity of 25 liters (specific gravity of water is 1), the specific gravity of gasoline is 0.75, so the gasoline would only occupy 75% of the water's capacity.
20
1
Share

What is the difference between electric vehicle charging piles and household electricity?

Household electricity provides AC charging, which is ordinary. Charging piles have AC, DC, and AC/DC charging facilities. Below are the relevant details: 1. Function of charging piles: The function of a charging pile is similar to that of a fuel dispenser in a gas station. It can be fixed on the ground or walls and installed in public buildings, residential parking lots, or charging stations. It can charge various types of electric vehicles according to different voltage levels. The input end of the charging pile is directly connected to the AC grid, and the output end is equipped with a charging plug for charging electric vehicles. 2. Charging methods: Charging piles generally provide two charging methods: conventional charging and fast charging. Users can swipe a specific charging card on the human-machine interaction interface provided by the charging pile to select the corresponding charging method, charging time, print cost data, etc. The display screen of the charging pile can show data such as charging amount, cost, and charging time.
14
0
Share

Does the Volkswagen Polo have a reverse camera?

The Volkswagen Polo does not come with a reverse camera, but it can be installed as an aftermarket accessory. Exterior of the Volkswagen Polo: The new car's exterior continues the style of the overseas version, featuring a sharper and more streamlined look compared to the current model. The headlights adopt a polygonal design, with a 'Y'-shaped element added inside, emphasizing more detailed styling. The taillights remain quite large, similar in style to the current model, but with richer details, including 'Y'-shaped design elements inside. Waistline of the new car: The windows are more streamlined, giving it a sportier appearance. The wheel rims feature a dual five-spoke design, combining high-gloss silver and high-gloss black for a distinctive look, with unique detailing. There are two prominent badges on the side, one being the 'b' logo on the B-pillar, indicating that the car is equipped with a Beats audio system.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.