What Causes the Tire Pressure Light to Illuminate in a Volkswagen Bora?

[SanCameron]

Here are the specific reasons why the tire pressure light illuminates in a Volkswagen Bora: Tire puncture: You can use a tire pressure gauge to measure. The normal values are 2.3 for the front tires and 2.5 for the rear tires. If the pressure is low, inflate the tire and then observe the tire pressure warning light. Excessive tire pressure: The standard tire pressure is 2.4-2.5 bar; reinforced tires require 2.8-2.9 bar. The maximum pressure should not exceed 3.5 bar. Therefore, if any tire exceeds 3.0 bar, it will trigger the tire pressure monitoring light. Driving with low tire pressure for too long: This situation usually occurs when a tire's pressure is too low, causing the tire temperature to rise due to high-speed operation, which in turn increases the tire pressure. In such cases, you should stop and rest or replace the tire with a spare one. Long-term lack of inflation leading to low tire pressure: When the pressure falls below 1.8 bar, the tire pressure monitoring light will illuminate. Regular checks should be performed to ensure the tire pressure monitor is functioning properly. If the tire pressure monitor does not alert you promptly when an issue arises, it may indicate a problem with the monitor itself.

[LeAngelina]

I've been driving for over a decade and it's quite common to encounter the tire pressure warning light. The main reason is usually abnormally low tire pressure, such as slow leaks in the tires or significant temperature drops causing pressure reduction. The Volkswagen Bora's tire pressure monitoring system is very sensitive - the light will come on immediately when pressure falls below the standard value to alert you. Never ignore this warning light. Driving with insufficient tire pressure for extended periods can easily lead to tire blowouts or reduced braking performance, which is especially dangerous during highway driving. It's good practice to keep a portable tire pressure gauge in your car. When the light comes on, pull over to check the pressure and adjust it to the recommended value in the manual. If you can't identify the issue, you should visit a professional shop to check whether the sensors or wheel rim seals are damaged. Safety always comes first - address the warning light promptly when it appears.