What Causes the Tire Inflation Alert in BMW?

What Happens When a Car Runs Out of Engine Oil?

Running out of engine oil can lead to the following symptoms: 1. The lubrication effect deteriorates significantly. In severe cases, the lack of lubrication can cause engine seizure, and the consequences worsen as the oil level decreases. 2. When the engine is restarted, dry or semi-dry friction occurs between the cylinders and pistons, accelerating component wear. The increased resistance also makes starting the engine more difficult. Here are the functions of engine oil: 1. Reduces wear: There is rapid relative sliding between pistons and cylinders, as well as between crankshafts and bearings. Engine oil prevents excessive wear of these components. 2. Cools the engine: Engine oil assists the radiator in cooling the engine by dissipating heat. 3. Seals and prevents leaks: Engine oil forms a sealing ring between piston rings and pistons, reducing gas leakage and preventing contaminants from entering. 4. Dampens vibrations: When pressure in the engine cylinder rises sharply, the load on pistons, piston rings, connecting rods, and crankshaft bearings increases suddenly. The lubricated bearings help cushion the impact load.

17

5

Share

What do the numbers 35, 40, and 50 at the back of Audi mean?

Audi's numbers 35, 40, and 50 represent engines with different power outputs. Generally, 35 stands for 1.4T, 40 for 2.0T low power, 45 for 2.0T high power, and 50 for 3.0T. These numbers indicate the g-value, reflecting the car's acceleration. The higher the number, the greater the horsepower and the better the performance. Audi's lineup includes models such as the A4L, A3, Q5, Q7, and S3. The Audi A4L, for example, has a body length of 4858mm, width of 1847mm, height of 1439mm, and a wheelbase of 2908mm. It is equipped with a 2.0T turbocharged engine paired with a 7-speed dual-clutch transmission. This engine delivers a maximum power of 110kW and a maximum torque of 270Nm.

18

5

Share

What are the items included in the third maintenance of the Tayron?

Tayron third maintenance items: 1. Replace engine oil, oil filter, fuel filter, air filter, cabin air filter, transmission fluid, coolant, and brake fluid. 2. Clean the throttle intake manifold and three-way catalytic converter. 3. The Tayron's third maintenance is performed when the vehicle has traveled 36,000-40,000 kilometers to consolidate and maintain the normal operation of various components. Below is relevant information about the Tayron's third maintenance: 1. In addition to all the items covered in the first and second maintenance, the third maintenance includes inspecting the engine, cleaning carbon deposits, gum deposits, and the cooling system. 2. Perform cleaning and inspection of the chassis assembly, check for paint peeling on the vehicle body, and inspect tires for abnormalities. 3. The most critical part is the engine, which involves cleaning and disassembling the engine, removing carbon deposits and oil sludge, disassembling and cleaning the air filter, replacing engine oil, checking the air compressor's working condition, and inspecting the sealing performance of pipelines. 4. Inspect the overall body, including the front face, fenders, cab, doors, and cargo compartment for paint condition, and perform touch-ups as needed. Remove fine sand and stones from tires, and check for bulges, delamination, cracks, deformation, or aging.

6

4

Share

Which Has Higher Fuel Consumption: Front-Wheel Drive or Rear-Wheel Drive?

Generally, front-wheel drive (FWD) vehicles are more fuel-efficient than rear-wheel drive (RWD) vehicles. FWD cars have fewer and simpler mechanical components, eliminating the need for a driveshaft, which significantly reduces the vehicle's weight. However, fuel consumption is influenced by various factors such as vehicle condition, road conditions, and driving habits, so owners should consider multiple aspects. Front-Wheel Drive (FWD) Cars: In FWD cars, the front wheels are the driving wheels, while the rear wheels are the driven wheels. The advantages of FWD cars with the same displacement include higher effective kinetic energy output, lower fuel consumption, stronger power, smaller size, larger interior space, lighter overall weight, compact structure, lower failure rate, and higher driving speed. FWD cars are typically used in high-priced, spacious sedans. Rear-Wheel Drive (RWD) Cars: RWD cars have the rear wheels as the driving wheels and the front wheels as the driven wheels. The advantages of RWD cars with the same displacement include better load-bearing capacity, simpler structure, easier maintenance, and superior handling performance. Therefore, RWD cars are generally used in large and medium-sized freight and passenger vehicles with large volumes and high cargo capacity.

14

1

Share

What is the meaning of hydrogen energy?

Hydrogen energy refers to using hydrogen as an energy source. Hydrogen energy has the advantages of being the lightest weight, having the best thermal conductivity, abundant reserves, being recyclable, high calorific value, excellent combustion performance, environmental friendliness, multiple utilization forms, various states, and minimal loss. Hydrogen-powered vehicles are divided into two types: hydrogen internal combustion engine vehicles, which use an internal combustion engine to burn hydrogen (usually obtained through methane decomposition or water electrolysis) to generate power to propel the vehicle; and hydrogen fuel cell vehicles, which use hydrogen or hydrogen-containing substances to react with oxygen in the air in a fuel cell to generate electricity to power an electric motor, which then drives the vehicle. The Audi A7 Sportback h-tron quattro, as a hydrogen fuel cell vehicle, is equipped with two electric motors on the front and rear axles, each with a maximum output of 85 kW and a maximum torque of 270 Nm, resulting in a total power of 170 kW and a torque of up to 540 Nm. The car accelerates from 0 to 100 km/h in 7.9 seconds and has a top speed of 180 km/h, comparable to gasoline-powered vehicles.

2

4

Share

What is the chassis code for the BMW 6 Series?

The BMW 6 Series has three chassis codes: F06 for the four-door model, F12 for the convertible model, and F13 for the two-door hardtop model. Here is more information about the BMW 6 Series: 1. The BMW 6 Series is equipped with two engines: a 3.0-liter turbocharged engine and a 4.0-liter twin-turbocharged engine. 2. The 3.0-liter turbocharged engine has the code N55B30, with a maximum power of 235 kW, a maximum torque of 450 Nm, a maximum power speed of 5800 rpm, and a maximum torque speed range of 1300 to 4500 rpm. This engine features BMW's Double-VANOS and Valvetronic technologies and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission. 3. The 4.0-liter turbocharged engine is a V8 engine, with a maximum power of 300 kW, a maximum torque of 600 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed range of 1750 to 4500 rpm. This engine also features BMW's Double-VANOS and Valvetronic technologies and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission.

18

5

Share

What Causes the Tire Inflation Alert in BMW?

What Happens When a Car Runs Out of Engine Oil?

What do the numbers 35, 40, and 50 at the back of Audi mean?

What are the items included in the third maintenance of the Tayron?

Which Has Higher Fuel Consumption: Front-Wheel Drive or Rear-Wheel Drive?

What is the meaning of hydrogen energy?

What is the chassis code for the BMW 6 Series?

Under What Circumstances Does a Car Starter Fail?

Which letter indicates the maximum speed of a tire?

How often should Motul 7100 oil be changed?

What is the purpose of a front splitter?