What Causes the Ticking Sound in the First Gear of the Wiper?

1 Answers
VonEvangeline
07/29/25 12:41pm
It could be due to the aging of the wiper. Replacing it with a new one should solve the issue. Wipers require frequent replacement, typically every six months. Over time, they may fail to clean effectively or start producing unusual noises. Below are the reasons why wipers make noise when wiping the windshield: 1. Wiper Arm and Wiper Blade: Common causes include impurities on the glass, poor-quality wiper blades, or aging, deformation, or hardening of the rubber strip (wiper blade) due to prolonged use. 2. Linkage Mechanism: Deformation of this mechanism or issues with the motor, intermittent relay, etc., can lead to unusual noises. Additionally, structural deformation over time can cause abnormal operation, which may also result in "unusual noises." 3. Motor Section: Poor motor performance or external circuit voltage issues can cause abnormal rotation or noise, such as insufficient operating voltage. Other potential causes include relay control issues, which may also lead to abnormal operation or noise. Adjustment Method: Primarily involves adjusting the angle of the wiper linkage arm.
Was this review help?
9
5
Share
More Forum Discussions

What does the dynamic performance of a car refer to?

Automotive dynamic performance refers to the average driving speed that a car can achieve when driving straight on a good road surface, determined by the longitudinal external forces acting on the car. The detailed introduction is as follows: 1. Maximum speed of the car: The highest driving speed that the car can achieve on a good road surface with rated load and in the highest gear. 2. Acceleration time of the car: The time required for the car to start in first gear and use the maximum acceleration (including selecting the appropriate shifting time) to gradually shift to the highest forward gear to reach the predetermined speed or distance. 3. Maximum gradeability of the car: The ability of the car to climb the maximum slope in first gear on a good road surface when fully loaded.
3
4
Share

How to Turn on the Rear Air Conditioning in an Audi A4L?

Audi A4L starts, wait a few minutes until the water temperature rises to normal temperature, then turn on the air conditioning. Adjust the air conditioning circulation mode to internal circulation, press the AUTO button to activate the air conditioning, which will automatically regulate the interior temperature. The operation and specific functions of the Audi A4L air conditioning system are as follows: 1. Driver's temperature adjustment. 2. Air conditioning automatic mode. 3. Rear windshield defogging. 4. Front windshield defogging. 5. Driver's air outlet mode selection. 6. Compressor A/C switch. 7. Airflow switch and adjustment. 8. Rear zone synchronization setting. 9. Passenger's air outlet mode selection. 10. Internal/external circulation switch. 11. Air conditioning system switch. 12. Passenger's temperature adjustment. 13. Zoned air conditioning automatic mode.
16
3
Share

What Does the Yellow Exclamation Mark on a Car Indicate?

When a yellow exclamation mark appears on the car dashboard, it can indicate one of four possible issues: general faults, automatic transmission failure, abnormal tire pressure, or lighting system malfunction. Below is a detailed analysis of each scenario: General Faults: A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance, components, or functions. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor issues. It is advisable to visit a 4S shop for diagnosis and repair to identify the source of the fault. Automatic Transmission Failure: A yellow gear with an exclamation mark inside is the automatic transmission warning light, signaling a fault in the transmission or that the transmission fluid level is below the normal range. Immediate replacement of the transmission fluid is recommended. Abnormal Tire Pressure: An exclamation mark inside a horizontal line under a parenthesis represents the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and adjust it back to the normal range. Lighting System Malfunction: A yellow bulb with an exclamation mark is the lighting system fault indicator, alerting you to a malfunctioning light. Solution: Visit a 4S shop as soon as possible for inspection and repair, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. Additionally, a red exclamation mark inside a circle with parentheses indicates a warning related to the braking system, typically signaling a braking system failure or low brake fluid level. Immediate inspection and repair of the braking system are necessary to prevent accidents.
5
1
Share

How Often Should Full Synthetic Oil Be Changed?

Full synthetic oil should be changed every 1 year or 10,000 kilometers. More information about full synthetic oil changes is as follows: 1. Full synthetic oil: This refers to an artificially manufactured oil produced by chemically decomposing various natural substances during the manufacturing process and then synthesizing them with other substances. Using full synthetic oil in cars can extend the engine's service life and reduce maintenance rates. 2. Full synthetic oil has superior characteristics: It offers better high and low-temperature performance, is suitable for harsher driving conditions, and has high lubricity, low friction resistance, resistance to oxidation, and strong cleaning properties. Therefore, full synthetic oil has a longer oil change interval. 3. Adjust the oil change interval based on the actual driving conditions: Engine oil has a certain shelf life and effectiveness. If the car operates in harsh conditions or frequently idles for extended periods, it is advisable to shorten the full synthetic oil change interval, recommending an early change by 1,000 kilometers or 1 month. Additionally, if noticeable engine vibration or increased engine noise is observed, the oil should be changed as soon as possible.
10
4
Share

Why does the car shake at high speeds?

The main reasons for a car shaking at high speeds are as follows: 1. Unbalanced tire pressure: Check if the tire pressure of all four wheels is normal. The pressure difference between the four tires should be controlled within a range of 0.2, and the pressure difference between tires on the same axle should be controlled within 0.1. 2. Issues with tire dynamic balance or severe wear: Perform a four-wheel cross-rotation every 10,000 kilometers or during the second maintenance. This can effectively prevent the vehicle from shaking or experiencing uneven tire wear. The most important aspect of four-wheel cross-rotation is performing dynamic balancing and checking tire wear to replace tires promptly. 3. Damaged engine mount cushions: Damaged engine mount cushions reduce the buffering effect, causing the engine to vibrate during operation. 4. Car battery depletion: A depleted battery leads to unstable voltage output, resulting in car shaking.
6
3
Share

How to Downshift in a Manual Transmission Car?

Before downshifting in a manual transmission car, the clutch pedal must be fully depressed. The specific steps for downshifting are as follows: 1. Before downshifting, fully depress the clutch pedal, and operate the gear shift lever gently, quickly, smoothly, and accurately: When downshifting, be skilled and swift, avoiding any pause in neutral. 2. Only when the speed drops to a certain value can you shift into a lower gear: Downshifting should be based on the vehicle speed, ensuring the gear change matches both the speed and engine RPM. When downshifting from 4th to 3rd gear on an uphill, depress the clutch while increasing the throttle when the speed drops to the maximum speed of 3rd gear, then shift into 3rd gear. On flat roads when downshifting from 4th to 3rd gear, first reduce the speed of 4th gear to the mid-range of 3rd gear, then depress the clutch, slightly increase the throttle, and shift from 4th to 3rd gear.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.