What causes the sunroof rattle in the Roewe erx5?

What is the Function of a Fuel Tank Pressure Sensor?

The function of a fuel tank pressure sensor is to convert the pressure of the fuel into an electrical signal and transmit it to a display instrument or signal acquisition device. The fuel tank pressure sensor is a commonly used pressure transmitter in industrial practice, widely applied in various industrial automation environments. It is involved in numerous industries such as petroleum pipelines, water conservancy and hydropower, railway transportation, intelligent buildings, production automation, aerospace, military industry, oil wells, power generation, ships, machine tools, pipeline ventilation, and boiler negative pressure. The working principle of the fuel tank pressure sensor is that the pressure acts directly on the diaphragm of the sensor, causing the diaphragm to produce a micro-displacement proportional to the medium pressure, which changes the resistance of the sensor. This change is detected by electronic circuits, and a standard signal corresponding to this pressure is converted and output.

9

5

Share

Where is the Envision fuse box located?

The Envision fuse box is located in: 1. The trunk; 2. The engine compartment; 3. Behind the front passenger seat panel. Taking the 2021 Envision as an example, its body structure is a 5-door, 5-seat SUV with body dimensions of: length 4694mm, width 1839mm, height 1686mm, wheelbase 2750mm, fuel tank capacity 66l, and curb weight 1610kg. The 2021 Envision features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169ps, maximum power of 124kw, and maximum torque of 250nm, paired with a 7-speed dual-clutch transmission.

4

1

Share

The Impact of Using the Wrong Fuel in a Car

If a car uses the wrong fuel for a long time, it can cause damage to the engine. Here are the hazards of using the wrong fuel: 1. Using lower octane fuel instead of higher octane fuel: In this case, the car may experience insufficient power and higher fuel consumption. However, the owner does not need to worry too much, as long as it is not a long-term practice, it will not cause significant damage. 2. Adding diesel to a gasoline car If diesel is accidentally added to a gasoline car, the vehicle usually cannot start. Since diesel has a lower ignition point, gasoline ignites through spark, while diesel ignites through compression. The ignition system will directly ignite the diesel, leading to knocking and engine damage.

11

3

Share

What Are the Reasons for No Response When Locking the Car with the Key?

The reasons for no response when locking the car with the key are: 1. Strong magnetic field interference signals around the car; 2. Car malfunction; 3. Dead battery or poor battery contact; 4. Aging antenna of the car's remote transmitter; 5. Failure of the time control module in the remote key. Solutions for no response when locking the car with the key: 1. Check the battery circuit or replace the battery; 2. Check the condition of aging circuits; 3. If the remote key doesn't work, use the mechanical key to lock the car; 4. Check the lock block and the condition of open or short circuits in the control circuit; 5. Park the car in another location and try again to avoid magnetic field interference signals.

8

3

Share

Where is the cabin air filter of Changan V3?

The cabin air filter of Changan V3 is located above the glove box on the driver's side. The cabin air filter can filter the air and prevent glass from fogging. Taking the 2015 Changan V3 as an example, it belongs to a compact car with a body size of 4200mm in length, 1650mm in width, and 1465mm in height, with a wheelbase of 2410mm and a curb weight of 985kg. The 2015 Changan V3 has a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.4L naturally aspirated engine, with a maximum horsepower of 101PS, a maximum power of 74kW, and a maximum torque of 135Nm, paired with a 5-speed manual transmission.

18

2

Share

Where is the battery located in the Q5?

The battery of the Q5 is located on the left side of the trunk. The functions of the battery include: 1. Providing a strong starting current to the starter when starting the engine; 2. Assisting the generator in supplying power to electrical equipment when the generator is overloaded; 3. Supplying power to electrical equipment when the engine is idling; 4. Protecting the electrical appliances in the car; 5. Converting part of the electrical energy into chemical energy for storage when the generator's terminal voltage is higher than the electromotive force of the lead-acid battery, thus charging it. Taking the 2018 Q5 as an example, its body structure is a 5-door, 5-seat SUV with body dimensions of: length 4629mm, width 1898mm, height 1655mm, wheelbase 2807mm, minimum ground clearance 185mm, fuel tank capacity 75L, trunk capacity 540L, and body weight 1900kg.

5

3

Share

What causes the sunroof rattle in the Roewe erx5?

What is the Function of a Fuel Tank Pressure Sensor?

Where is the Envision fuse box located?

The Impact of Using the Wrong Fuel in a Car

What Are the Reasons for No Response When Locking the Car with the Key?

Where is the cabin air filter of Changan V3?

Where is the battery located in the Q5?

How to Use the Fog Lights on Volkswagen Jetta?

What to Do If There's Water in the Gasoline?

How to open and replace the battery of Dongfeng Fengshen AX7 key?

Why is there a strange noise when shifting into P gear?