What Causes the Sunroof Leakage in Volkswagen Tiguan L?

1 Answers
ColtonRose
07/30/25 8:42am
Solutions for Volkswagen Tiguan L Sunroof Leakage: 1. Regularly clean the drainage outlets; approximately once a year, clean the nipple of the drainage outlet. 2. Alternatively, you can cut off the nipple of the drainage outlet, which can resolve the issue permanently. There are three common reasons for sunroof leakage: 1. The sunroof drainage outlet is clogged, causing rainwater to accumulate and gradually seep into the car; 2. The sunroof sealing strip is damaged, leading to poor sealing and allowing rainwater to enter the car; 3. There are gaps in the sunroof frame, causing rainwater to seep into the car, which usually occurs during heavy rain. According to after-sales service advice, you can systematically eliminate these factors. First, check for water stains on the ceiling near the sunroof. If there are no water stains, you can preliminarily rule out reasons 2 and 3. Then, determine whether the first reason is the cause. Find a clean surface, open the sunroof, and pour water from a bottle into the grooves around the sunroof to observe whether the water drains smoothly. If the water does not drain smoothly, and no water or only slow drainage is observed on the ground near the front tires, it indicates that the drainage pipe is clogged. In this case, you need to clean the drainage pipe, remove any debris, and test the drainage again. Here’s a useful tip: if you often park your car under trees outdoors or in dusty areas, you can clean the drainage holes yourself approximately once a year. This can effectively prevent similar issues from recurring. Additionally, try to avoid parking under trees or in dusty areas for extended periods. It’s recommended to clean the drainage outlets and the grooves around the sunroof approximately once a year.
Was this review help?
9
2
Share
More Forum Discussions

What is the appropriate tire pressure for the BYD Tang?

The appropriate tire pressure for the BYD Tang is between 220kpa and 260kpa. The hazards of high tire pressure are: 1. It reduces the friction and adhesion of the tires, affecting braking performance and tire lifespan; 2. It decreases the tire's resistance to punctures, increasing the risk of blowouts; 3. It accelerates wear on the central tread pattern, shortening tire lifespan and increasing vehicle vibration, which affects the longevity of other components; 4. It causes excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body and increasing the load on the vehicle while driving, thereby decreasing puncture resistance; 5. It makes the tires more susceptible to punctures from sharp objects like nails and glass, leading to internal cracks and blowouts under impact.
18
4
Share

How to reset the odometer on the Audi Q2L?

Audi Q2L odometer reset method is: 1. Press the menu button on the turn signal control lever on the left side of the steering wheel; 2. Enter the mileage/fuel information menu option, rotate the thumbwheel on the control lever; 3. Scroll to select odometer 1 in the options, then press the setclr button at the top of the control lever to reset. Taking the 2021 Audi Q2L as an example, it is a compact SUV with body dimensions of: length 4236mm, width 1785mm, height 1548mm, wheelbase 2628mm, fuel tank capacity 50L, luggage compartment volume 347L, and curb weight 1405kg.
14
1
Share

How to Turn on the Air Conditioning Cooling in the Tiguan L?

The method to turn on the air conditioning cooling in the Tiguan L is: 1. Press the AC button to activate the air conditioning cooling; 2. Rotate the temperature control knob to adjust the cooling or heating. Taking the 2021 Tiguan L as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4712mm, width 1839mm, height 1673mm, wheelbase 2791mm, fuel tank capacity 60L, and curb weight 1650kg. The 2021 Tiguan L is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 186PS, maximum power of 137kW, maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
19
0
Share

What is the formula for calculating fuel consumption per 100 kilometers?

Calculation method: The standard is to divide the volume of gasoline used by the distance traveled to get the fuel consumption per kilometer, then multiply by 100 to get the fuel consumption per 100 kilometers. For example, if you travel 600 kilometers and use 45 liters of fuel, the calculation method is 45/600*100=7.5 liters per 100 kilometers. Below are other methods for calculating fuel consumption per 100 kilometers: 1. Estimation method: Fuel consumption per 100 kilometers = theoretical fuel consumption + (2-2.5). Although this method is only an estimation, it is not without examples. Since it is an estimation, there will inevitably be errors. If you are a beginner or don't have enough time to calculate the exact fuel consumption, you can use this method to temporarily estimate, and it will still have some reference value. 2. Normal calculation method: The formula for calculating fuel consumption per 100 kilometers is (phase fuel consumption * 100) / phase mileage. For example, 88L * 100 / 723 kilometers = 12.17L/100 kilometers. Here, phase fuel consumption / phase mileage equals fuel consumption per kilometer, multiplied by 100 equals fuel consumption per 100 kilometers. 3. Amateur calculation method: The fuel consumption is 100/7.5=13.3 liters, 13.4/130*100=6.1 liters/100 kilometers, that is, the fuel consumption per 100 kilometers is 6.1 liters. 4. Amateur calculation method: Download a fuel consumption calculator on your phone and fill in the data, provided you know the required data.
10
3
Share

Which country produces Acura cars?

Acura cars are produced in Japan. The models under the Acura brand include: Acura RDX, Acura CDX, Acura RL, Acura MDX, Acura NSX, etc. Taking the 2020 Acura RDX as an example, it belongs to the mid-size SUV category with body dimensions of: length 4752mm, width 1926mm, height 1668mm, wheelbase of 2750mm, fuel tank capacity of 65L, and luggage compartment capacity of 660L. The 2020 Acura RDX is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 265PS, maximum power of 195kW, maximum torque of 380Nm, and is paired with a 10-speed automatic transmission.
14
3
Share

What are the symptoms of damaged engine mounts in a car?

The symptoms of damaged engine mounts in a car are: 1. Obvious engine vibration when reversing; 2. Noticeable engine vibration when starting the car; 3. Significant engine vibration when the engine is cold, which improves after warming up; 4. Steering wheel vibration during idle, with noticeable vibration in the brake pedal; 5. Abnormal noises from the engine when going over speed bumps. The maintenance methods for the engine include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning the radiator scale; 4. Regularly removing engine carbon deposits; 5. Regularly replacing the car's three filters; 6. Maintaining a reasonable engine speed.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.