What causes the sunroof leakage in GAC Trumpchi M8?

2 Answers
CharlieRose
07/24/25 2:09pm
GAC Trumpchi M8 sunroof leakage is mostly caused by blocked drainage pipes, while door leakage is generally due to aging window seals or clogged door drainage holes. Below is a detailed analysis of the specific reasons for sunroof leakage: Poor rainwater drainage: Blocked sunroof drainage outlets can lead to poor rainwater drainage, gradually seeping into the car. This phenomenon mainly occurs when the owner fails to regularly clean the roof, allowing debris to flow with rainwater and clog the drainage outlets. This issue can be addressed by using a wire hook to remove the debris from the drainage hole or by visiting a repair shop to use an air gun to blow out the debris. Damaged sunroof seal: The sunroof seal is made of rubber, which can age over time and become damaged due to repeated friction with the sunroof glass, leading to poor sealing and leakage during rainy weather. In such cases, it is important to regularly inspect the aging condition of the seal and replace it promptly if damaged. Choose a seal with good performance, resistant to aging and corrosion. Roof deformation: If the car is involved in a collision, the body may deform. If not properly restored during repairs, it can result in poor sealing and leakage. When repairing accident-damaged cars, it is essential to strictly adhere to the original vehicle standards; otherwise, parts may not fit properly, creating potential leakage issues.
Was this review help?
7
1
Share
DiAlan
08/11/25 8:03am
My GAC M8 also had a sunroof leakage issue last year, and I found there are mainly three problematic areas. The rubber seals around the sunroof tend to age and crack over time, especially for cars frequently exposed to sunlight—once the seals deform, they can't close tightly. Additionally, the drainage holes at the four corners of the sunroof are easily clogged by dust and leaves, causing rainwater to seep into the car when it can't drain properly. Another time, I noticed a loose connection in the drainage pipe during a car wash, which let water flow directly into the headliner. Since then, I’ve been using a thin wire to clear the drainage holes every quarter and always check the seals after washing the car. It hasn’t leaked for over a year now. I recommend parking away from trees when possible and asking the mechanic to inspect these areas during regular maintenance.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

What are the typical length, width, and height of a car?

Generally, the length of a sedan ranges between 3800mm and 4300mm, the width between 1600mm and 1800mm, and the height between 1400mm and 1600mm. Length: Length is the most influential parameter affecting a car's purpose, functionality, and ease of use. Therefore, vehicle classes are typically categorized by length. A longer body means more longitudinal usable space. Width: Width primarily impacts seating space and maneuverability. For passenger cars, if three seats arranged side by side are to provide a spacious feel (mainly sufficient shoulder room), the width generally needs to reach 1.8 meters. Height: Vehicle height directly affects the center of gravity (handling) and interior space. Most sedans are under 1.5 meters in height, significantly lower than the natural sitting height of a human body. This is mainly to lower the vehicle's center of gravity, ensuring stability during high-speed cornering to prevent rollovers.
17
0
Share

Should the X-Trail use 92 or 95 octane gasoline?

This model can be filled with 92 octane gasoline. If the owner has been using 95 octane gasoline, it is not advisable to switch arbitrarily. If unsure, it is recommended to check the maintenance manual. Gasoline selection: The type of gasoline a vehicle uses is closely related to its engine compatibility. Higher compression ratios result in greater power and efficiency but correspondingly lower stability, thus requiring gasoline with better anti-knock properties. Hazards of mixing: Occasionally mixing different octane grades is acceptable, but long-term mixing can lead to engine knocking, insufficient power, and other issues, accelerating engine wear.
19
3
Share

How long does it usually take to practice for Subject 3 before taking the test?

Generally, it takes 6 days of practice to prepare for the Subject 3 driving test. These 6 days are necessary to fulfill the required training hours for the motor vehicle driver's license Subject 3 exam. Only after completing the mandatory 24 hours of training (with a maximum of 4 hours per day) can you take the test; otherwise, you will not be eligible. During the test, before getting into the car, you must perform a walk-around inspection. The test vehicle is equipped with two sensors, and you need to be detected by these sensors to complete this step. Once inside the car, first adjust the seat to a comfortable position and angle, then fasten your seatbelt—this is the most crucial step. Failing to fasten the seatbelt will result in an immediate failure. Next, adjust the rearview mirrors and the gear before starting the engine. Begin smoothly, signal in time, maintain a safe following distance, stop at red lights and go at green lights—never run a red light. Avoid driving in third gear the entire time; learn to shift gears flexibly as needed.
4
5
Share

What is the maximum number of points that can be deducted from a driving license?

National regulations stipulate that a maximum of 12 points can be deducted from a driving license, with a yearly reset. Here is the relevant information: Points Deduction: If less than 12 points are deducted within a year, the points will be reset to zero on the date of license issuance. If 12 points are already deducted within a year, the driver must undergo training and pass an examination before the points can be reset to zero. Definition: The full name of a driving license is a motor vehicle driving license, also known as a "driver's license," which is a legally required certification for motor vehicle drivers. Main Classifications: The National Ministry of Public Security has further subdivided the previous three types of driving permits (A, B, and C) into seven types, while canceling the Q permit.
6
3
Share

What Causes the Vehicle's Engine Malfunction Light to Stay On?

There are primarily 7 reasons for the engine malfunction light to illuminate: Sensor failure: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, leading to the illumination of the engine malfunction light. Fuel quality issues: If fuel and engine oil are not added as required by the manufacturer, it may cause engine wear, resulting in the malfunction light turning on. Poor combustion of the air-fuel mixture: Poor combustion can lead to engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the malfunction light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockages can all cause poor combustion of the engine's air-fuel mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine malfunction light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, high oil consumption, reduced power, metallic noises, and blue or black smoke from the exhaust pipe. Intake issues: If the vehicle's intake system has problems, it may lead to engine pipeline blockages, and in severe cases, the engine malfunction light will illuminate. A dirty air filter that is not cleaned regularly can cause intake problems. Exhaust issues: Exhaust system failures can also cause the engine malfunction light to illuminate. Common causes include rear oxygen sensor failure, catalytic converter issues, exhaust camshaft and bearing failures, with the catalytic converter being the most frequent culprit. The use of leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the catalytic converter, and fuel supply system failures can all easily lead to catalytic converter problems. Anti-theft system failure: If the vehicle's electronic anti-theft system malfunctions, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally, and the engine malfunction light will illuminate. If the engine malfunction light is on, follow these steps: First, check if the engine is running normally, and look for issues such as shaking or black smoke. If present, avoid restarting the engine. Note: Do not restart the engine if the red light is on. If the engine can be started, turn it off and wait for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The vehicle will perform a self-check after powering on. Wait for 5-10 seconds and observe if the malfunction light on the dashboard turns off. If the malfunction light remains on, visit a service station as soon as possible to identify the cause. The service station can use a portable diagnostic tool to read the fault codes, obtain fault information, and perform targeted repairs.
14
2
Share

Why does the car shake violently when starting in first gear with half-clutch and no throttle?

The shaking of the car when starting in first gear with half-clutch may be caused by the following reasons: Reason 1: The clutch pressure plate is unevenly worn, resulting in insufficient power. Reason 2: Incomplete fuel combustion, excessive engine carbon deposits, or insufficient engine power itself. Reason 3: The engine and transmission are not properly aligned. Reason 4: The connection between the transmission and the chassis is loose. To determine the exact cause, each of these conditions should be checked one by one. It is recommended to go to a 4S shop for repair. Tips: Familiarize yourself with the clutch pedal operation and develop good habits—press it all the way down when engaging and release it slowly. Always use first gear when starting and pay attention to the coordination between the throttle and clutch.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.