What Causes the Sunroof Drain Pipe of the Sagitar to Detach?

2 Answers
DelEverly
08/29/25 7:56am
It may be due to adhesive aging or caused by collision or pulling. More information about the Sagitar is as follows: 1. Introduction: The Sagitar is a joint-venture A+ class sedan brand under Volkswagen. It was introduced to the Chinese market on April 9, 2006, and its predecessor is the fifth-generation Volkswagen Jetta sedan, positioned as a "German high-performance sedan." 2. Representative Model: The new-generation Sagitar Long-Wheelbase adopts the "Quality·Beyond Aesthetics" design concept, using exquisite and stylish lines to outline the new standard of contemporary aesthetic trends, presenting an enduring modern and dynamic shape that highlights the unique taste and temperament of China's new generation of elites.
Was this review help?
11
3
Share
LaTucker
09/11/25 5:25am
I've driven a Sagitar for ten years and experienced the issue of the sunroof drain tube coming loose, mainly due to aging problems with the tube. The material of the Sagitar's drain tube isn't durable enough—prolonged exposure to high temperatures or freezing conditions makes it brittle and prone to cracking. Additionally, the aging fasteners can loosen, causing the tube to detach with just a bit of bumpy driving. When my tube came off, rainwater leaked into the car, soaking the carpets and nearly damaging the electronics, leading to costly repairs. I recommend regularly inspecting the sunroof area, clearing the tube openings to prevent blockages, especially before summer storms, to avoid the trouble I went through. Aging is natural, but the Sagitar's design might have a slight flaw—the tube material is too weak. It's best to visit a 4S shop to upgrade to reinforced parts.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

What Causes the Brake Light to Illuminate When the Brake Pedal is Pressed?

When a driver presses the brake pedal, the reasons for the brake light on the dashboard to illuminate include loss of hydraulic pressure in the brake system and thinning of the brake pads. Loss of hydraulic pressure in the brake system: If the brake fluid is insufficient, the hydraulic pressure in the brake system will decrease or even disappear. This is because the two hydraulic circuits in the brake system are typically separated in most rear-wheel-drive vehicles—one circuit applies to the front brakes and the other to the rear brakes. In front-wheel-drive cars and small trucks, the system is usually split diagonally. One circuit serves the right front and left rear brakes, while the other serves the left front and right rear brakes. If the hydraulic circuit lacks sufficient fluid, the hydraulic pressure will disappear, causing the brake system to fail, which may result in an inability to brake, and the car's brake light will illuminate when the brake is applied. Thinning of the brake pads: If the brake pads have worn down to the point where they need replacement, the brake light will illuminate when the brake pedal is pressed, reminding the owner to replace the brake pads promptly. This is because the car's brake pads are equipped with a manufacturer-set wear indicator line. When the brake pads reach their usage limit, an alert will appear. Owners should regularly inspect the tire brake pads and use a measuring tool to check the thickness of the brake pads. If significant wear is detected, the brake pads should be replaced promptly.
12
2
Share

Can Beijing National VI Diesel Vehicles Be Licensed?

Beijing National VI diesel vehicles cannot be licensed. The following is extended content: 1. Phase V Emission Control Requirements: "Limits and Measurement Methods for Exhaust Pollutants from Compression Ignition and Gas Fuel Positive Ignition Engines and Vehicles (China III, IV, V Phases)"; "Limits and Measurement Methods for Exhaust Pollutants from Compression Ignition and Gas Fuel Positive Ignition Engines and Vehicles (Bench Test Method)"; "Limits and Measurement Methods for Exhaust Pollutants from Heavy-Duty Vehicles (On-Board Method)". 2. Enterprise Declaration Requirements: Enterprises declaring for the environmental protection catalog must continue to follow the requirements stipulated in "Notice on the Declaration Requirements for Heavy-Duty Diesel and Gas Vehicles (Engines) for the Beijing Environmental Protection Catalog" and "Notice on Relevant Regulations for Heavy-Duty Vehicle Emission Control". At the same time, enterprises must strengthen production management to ensure that sold vehicles stably meet the standards. 3. Heavy-Duty Diesel Vehicle Requirements: New heavy-duty diesel vehicles (such as buses, sanitation vehicles, tourist vehicles, postal vehicles, dump trucks, shuttle buses, school buses, airport buses, etc.) used within the administrative area of Beijing should be equipped with wall-flow particulate filters (DPF). 4. Vehicle Registration Requirements: Vehicle models that do not comply with Phase V regulations will not be processed for vehicle registration. Heavy-duty diesel vehicles meeting Phase IV emission standards purchased before August 1, 2015 (based on the date of the purchase invoice) or transferred from other provinces to Beijing before that date (based on the transfer registration date in the vehicle registration certificate) can continue to be processed for vehicle registration.
20
2
Share

Why doesn't the BMW 1 Series make a sound when locking?

BMW 1 Series does not make a sound when locking because the locking sound feature is not enabled. The method to set the locking beep for BMW 1 Series is to activate the remote key's locking horn function by simultaneously pressing the unlock and lock buttons for 3 seconds until the lights flash. Relevant information about BMW sedans is as follows: 1. Design characteristics: BMW sedans feature distinctive body styling with round headlights paired with rectangular radiator grilles, creating a unique style. 2. Powertrain: All BMW models are rear-wheel drive. The rear-wheel drive configuration allows for a 50-50 weight distribution between front and rear, providing better performance during high-speed cornering and straight-line driving compared to front-wheel drive vehicles.
4
0
Share

What is the working principle of a rotary engine?

Working principle of a rotary engine: The rotary engine directly converts the combustion expansion force of combustible gas into driving torque. Compared with reciprocating engines, the rotary engine eliminates useless linear motion, resulting in a smaller size, lighter weight, and lower vibration and noise for the same power output, giving it significant advantages. Conventional engines are reciprocating engines, where pistons move back and forth in a straight line within the cylinders. To convert this linear motion into rotational motion, a crankshaft-slider mechanism is required. In contrast, the rotary engine uses a triangular rotor's rotational motion to control compression and exhaust, which differs significantly from the linear motion of traditional reciprocating piston engines.
4
5
Share

How to reset the maintenance light on the 2020 Mercedes-Benz GLB200?

2020 Mercedes-Benz GLB200 maintenance light can be reset through the "Complete Maintenance" option in "ASSYSTPLUS". Here is some extended information about Mercedes-Benz: 1. Development History: After a century of development, the name Mercedes has become synonymous with the world's most innovative car brand. Since the first Mercedes car was introduced by Daimler-Motoren-Gesellschaft on December 22, 1900, through relentless efforts, it has now grown into one of the world's largest international automotive companies, Daimler AG. 2. Automotive Legend: Today, Mercedes-Benz under Daimler AG is the world's most successful premium luxury car brand. This brand carries its extraordinary technical strength, superior quality standards, bold innovative capabilities, and a series of automotive legends.
11
4
Share

Does an Engine Boiling Over Require an Overhaul?

An engine boiling over does not require an overhaul. When an engine boils over, a large amount of white steam will emerge from the engine cover, which is very easy to notice. At this point, you only need to immediately stop the vehicle, turn off the engine, and let it cool down naturally. As long as the operation is standardized, it is rare for an overhaul to be necessary. Causes: There are many reasons for a car boiling over. Apart from hot weather, overloaded air conditioning operation and faulty cooling components can also cause the car to boil over. Conducting a comprehensive inspection of the car's cooling system is the primary method to prevent boiling over. Check whether the cooling fan is working properly, whether the radiator is leaking, and whether there is a lack of coolant. If the radiator is leaking, it needs to be repaired or replaced promptly. If the radiator is low on coolant, it should be replenished in time. If the coolant becomes turbid or deteriorated, it needs to be replaced. Solution for a Boiling Over Car: The first thing to do when noticing the engine boiling over is to immediately pull over and stop the car. Boiling over means the engine is losing its cooling capacity, and the internal temperature of the engine will rise rapidly at this time. If the cooling is not sufficient immediately or the operation is not standardized enough, it can easily affect the strength of internal components such as pistons, piston rings, and connecting rods, causing them to weaken, deform, or even be damaged. In severe cases, it may lead to the engine being directly scrapped.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.