···
Log in / Register

What Causes the Sudden Loud Noise from the Wiper Motor?

4 Answers
LaAshlyn
09/04/25 6:16am

The sudden loud noise from the wiper motor may be due to an increased friction coefficient between the wiper and the glass surface, or it could indicate a malfunction in the wiper motor. Additional details are as follows: 1. Introduction: The wiper is an important accessory installed on the windshield, designed to remove rain, snow, and dust that obstruct visibility. Thus, it plays a crucial role in driving safety. 2. Principle: The motor in an electric wiper drives the output shaft via a worm gear on the armature shaft, which then drives the output gear through an idler and idler shaft. The output arm, connected to the wiper linkage, is then operated by the output shaft. When the motor rotates, the output arm and linkage are driven to move back and forth.

Was this review help?
3
5
Share
JoshuaAnn
09/16/25 7:13am

My wiper had a similar issue before, making noises as loud as a roaring tractor. I was driving in heavy rain at that time, and the noise completely drowned out all external sounds. After inspection, it was mainly due to aging and rust in the wiper linkage mechanism, along with insufficient lubrication causing the motor to overload and produce abnormal noises. It could also be caused by loose fixing nuts on the wiper arm or joint wear leading to vibrations. If left unaddressed for a long time, the motor might burn out or the linkage could jam and fail. I recommend going to a repair shop immediately for inspection and replacing parts or applying lubrication if necessary. Never ignore it, as impaired visibility during rain would be dangerous. Regular application of lubricant during maintenance can prevent such failures.

Was this review help?
8
1
Share
Expand All
ElizaRose
10/30/25 7:48am

The sudden loud noise from the wiper motor is commonly caused by damaged internal bearings or lack of lubrication. Over the years while repairing cars, I've frequently encountered cases where rusted wiper linkage gets stuck, forcing the motor to work harder and produce loud noises. Alternatively, foreign objects like small stones or leaves stuck in the mechanism can cause friction-induced noise. Check if the wiper arms are securely installed, as looseness can amplify the noise. If not addressed promptly, the motor may overheat and burn out, potentially requiring replacement of the entire assembly. It's best to visit a professional shop soon for disassembly and inspection - spending a small amount now can prevent greater losses, ensuring both safety and cost-effectiveness.

Was this review help?
14
4
Share
Expand All
IanMarie
12/13/25 7:56am

My car's windshield wipers were making a lot of noise recently, to the point where it was distracting while driving. A friend suggested it might be due to aging motor gears wearing out, or water seepage causing short circuits and rust. After spraying some WD-40 to lubricate the linkage, it improved significantly. Sometimes, the noise can also be caused by loose or unstable wiper arm joints creating vibration sounds. It's recommended to first check if there's any debris stuck under the linkage. If cleaning doesn't help, then the motor might need replacement. Don't delay too long, as driving with the noise can be distracting and affect safety.

Was this review help?
16
2
Share
Expand All
More Forum Discussions

What is the fuel consumption of the S90?

The official combined fuel consumption of the Volvo S90 is 6.7 liters per 100 kilometers. Here are the detailed specifications of the Volvo S90: Body dimensions: The length, width, and height of the Volvo S90 are 5090mm, 1879mm, and 1450mm respectively, with a wheelbase of 3061mm. Powertrain: It is equipped with the low/high-power Drive-E series 2.0T turbocharged engine, where the T4 corresponds to the low-power version, delivering 139kW (190PS), and the T5 corresponds to the high-power version, delivering 186kW (254PS), paired with an Aisin 8-speed automatic transmission.
6
1
Share

What causes the dashboard to sometimes not light up or display anything?

The dashboard sometimes not lighting up or displaying anything can be caused by the following reasons: 1. Circuit failure: Due to dashboard circuit malfunctions. 2. Poor contact: Loose connections or short circuits. It's best to have it inspected at a repair shop. Below are relevant explanations: 1. Indicators: When turning on the low beams, no indicator will appear on the dashboard. Only when the high beams are activated will a high beam indicator appear. Most vehicles don't display any indicator when low beams are turned on. However, the dashboard backlight usually dims when low beams are on, and brightens when they're off. 2. Control buttons: The lighting control area for most vehicles is located on the left side of the driver's steering wheel, with rotary knobs being the most common control button type.
8
0
Share

What is the working principle of a manual transmission?

Manual transmission works as follows: 1. Principle: A manual transmission consists of gear sets with different gear ratios. Its basic working principle is to achieve gear ratio changes by switching between different gear sets. 2. Components: As a key component for power distribution, the transmission must have two major parts - the power input shaft and output shaft. Together with the gears that form the transmission, these constitute the most basic components of a manual transmission. 3. Power: The input shaft is connected to the clutch, and the power transmitted from the clutch is directly transferred to the gear set through the input shaft. The gear set consists of gears with different diameters, and different gear ratios achieve completely different power transmission effects. The gear shifting during normal driving refers precisely to changing gear ratios.
8
2
Share

How to Fix Loud Valve Noise in Hyundai Santa Fe?

Modern Hyundai Santa Fe valve noise causes and solutions are as follows: 1. Caused by clearance between hydraulic valve lifters and camshaft (or valve seat). The clearance is mostly due to excessive wear of hydraulic lifters, causing rapid oil pressure loss inside the lifter and resulting in noise. The hydraulic lifters need to be replaced; 2. Noise caused by excessively high or low crankcase oil level. The engine oil level needs to be checked; 3. Noise caused by dirty lifters. The hydraulic lifters need to be cleaned; 4. Noise caused by oil being too thin. Replace with oil of appropriate viscosity; 5. Noise caused by low oil pressure. The cause of low oil pressure needs to be checked.
17
2
Share

Is the BMW 2 Series Gran Tourer Imported?

BMW 2 Series Gran Tourer has both imported and domestically produced versions. Here is the introduction to the imported BMW 2 Series Gran Tourer: 1. The length, width, and height are 4580mm, 1800mm, and 1662mm respectively, with a wheelbase of 2780mm; 2. The exterior design follows the family-style design, featuring a kidney-shaped front grille with chrome trim decorations, and the headlights on both sides use sharp lines, giving it a high recognition; 3. It is equipped with a 1.5T turbocharged engine, paired with a 7-speed dual-clutch transmission. The actual displacement of this engine is 1499ml, with 3 cylinders arranged in an L configuration, and the valve train is DOHC.
18
4
Share

Where is the air conditioning air intake vent of a car located?

There are two air intakes for a car's air conditioning system. One is for the external circulation, located in the box with the air filter under the front windshield; the other is for the internal circulation, which consists of two round openings on both sides of the dashboard inside the cabin. Most cars have air filtration devices installed for the external circulation intake, such as pollen filters or dust filters; however, most internal circulation systems do not have air filtration devices. Below is a related introduction about the functions of a car's air conditioning system: 1. The air conditioner can control the temperature inside the cabin, heating or cooling the air to maintain a comfortable level; 2. The air conditioner can remove moisture from the air. Dry air absorbs human sweat, creating a more comfortable environment; 3. The air conditioner can draw in fresh air, providing ventilation; 4. The air conditioner can filter the air, removing dust and pollen.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.