What causes the sudden loss of response in the Baojun 730 clutch?

1 Answers
SanAmir
07/30/25 6:00am
Baojun 730 clutch suddenly not responding reasons are: poor clutch return; clutch pump failure; clutch oil pipe blockage. The function of the clutch is to engage or disconnect the engine's power output. Below are some additional details: 1. The body dimensions of the Baojun 730 are: length 4780mm, width 1780mm, height 1740mm, wheelbase 2750mm, fuel tank capacity 52l. 2. In terms of power: the Baojun 730 is equipped with a 1.5t turbocharged engine, with a maximum power of 108kw, maximum power speed of 5200rpm per minute, maximum torque of 250nm, matched with a 6-speed manual transmission.
Was this review help?
18
5
Share
More Forum Discussions

What Causes Engine Abnormal Noise?

Reasons for engine abnormal noise are as follows: 1. Carbon buildup in the engine throttle. 2. Exhaust system blockage. 3. Spark plug malfunction. 4. Muffler issues. 5. Cooling system failure. Here is relevant information: An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, and electric motors. Internal combustion engines typically convert chemical energy into mechanical energy. The term 'engine' can refer to either the power generation device or the entire machine including the power unit. Common cylinder configurations for automotive engines include 3-cylinder, 4-cylinder, 6-cylinder, 8-cylinder, 10-cylinder, and 12-cylinder. If abnormal engine noise occurs during daily vehicle use, it is recommended to contact the local 4S dealership for timely inspection and repair.
16
5
Share

What to Do When the Car Tire Pressure Warning Light Comes On?

Here are the steps to handle a car tire pressure warning: 1. Pull over safely: When the tire pressure warning light comes on, first turn on the hazard lights, slow down gradually, and after ensuring it is safe, pull over to the right side of the road. If you are on a highway, try to stop in the emergency lane and set up a safety warning sign 150 meters behind the vehicle. 2. Rule out false alarms: Tire pressure monitoring systems work in two ways: active and passive. Active systems trigger an alarm when the tire pressure is too low or there is a leak, based on preset pressure values. Passive systems monitor tire pressure by detecting tire rotation speed, as underinflated tires rotate faster than normal ones. There are four common reasons for a tire pressure warning: a punctured or leaking tire; not resetting the tire pressure settings after changing or repairing a tire; not resetting the tire pressure settings after inflating the tires; or the car being parked for a long time without use. Therefore, it is advisable to conduct a self-check first. 3. Change the tire or call for assistance: If the tire pressure continues to drop after the above checks, exit the vehicle to inspect the faulty tire. During this time, keep the hazard lights on, wear reflective clothing, and ensure a safety warning sign is placed at a safe distance behind the car. If you find the tire is leaking or damaged, you can use the car's jack to replace it with the spare tire.
11
3
Share

What to Do When a Motorcycle Battery Dies After Prolonged Storage?

Possible causes and solutions for a dead battery are as follows: 1. The battery has not been charged for a long time, leading to discharge. In this case, simply recharge the battery. 2. The battery is severely discharged and damaged, requiring replacement with a new one. Here are some related tips: 1. Generally, a motorcycle should be started once a month and run for about 10 minutes before recharging. 2. If there is a wiring fault causing battery leakage, it is necessary to visit a repair shop to have the wiring checked by a mechanic. Ignoring this issue not only leads to battery drain but also poses safety risks later on. 3. Carburetor-equipped motorcycles may also experience battery discharge, preventing startup. Carburetors often retain residual gasoline, which, when exposed to air for extended periods, can accumulate impurities, oxidize, and form gum deposits. These deposits can clog the main jet and idle jet. Cleaning the carburetor will resolve the issue and allow the motorcycle to start.
8
5
Share

Why does it show unlocked when the car door is locked?

This may be a fault with the car door lock sensor. Here is some relevant information about car doors: 1. Concept: Car doors provide access for drivers and passengers while isolating external disturbances, reducing side impacts to a certain extent and protecting occupants. 2. Function: The aesthetics of a car are also related to the design of the doors. The quality of car doors is mainly reflected in their anti-collision performance, sealing performance, ease of opening and closing, and of course, functional indicators. Anti-collision performance is particularly important because during a side impact, the buffer distance is very short, making it easy for passengers inside to get injured.
4
1
Share

Can I get a loaner car when my vehicle is being repaired at a 4S shop?

Yes, but the conditions are quite stringent. Here is relevant information about automotive 4S shops: 1. Introduction to 4S shops: A 4S shop, fully named Automobile Sales Service 4S Shop, is an integrated automobile sales enterprise combining whole vehicle sales, spare parts, after-sales service, and information feedback. 2. Advantages of 4S shops: Brand advantage - Most 4S shops handle automobile brands with strong brand recognition, competitive power, and significant market share. Complete and standardized service system - The core competitiveness of 4S shops lies in winning customers through high-quality services.
14
5
Share

Is it necessary to maintain 30 centimeters for a right-angle turn?

For a right-angle turn, it is necessary to maintain a distance of 20-30 centimeters from the side line. Below is an introduction to the relevant content of Subject 2: 1. Test requirements: The test requirement for parallel parking is that the driver must park the vehicle into the right parking space without the wheels touching the lane boundary or the parking space boundary. 2. Content and requirements of Subject 2: The five assessment items are reversing into a parking space, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. Subject 2 requires 26 class hours, of which 2 are theoretical knowledge, so in reality, it is 24 class hours.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.