What Causes the Sudden Hardness and Inability to Press Down the Brake in an Electric Vehicle?

Is the Toyota IZOA compliant with China National VI emission standards?

Toyota IZOA complies with China National VI emission standards. To determine whether a vehicle meets China National V or VI emission standards, you can check the vehicle model number on the nameplate located below the co-driver's door. Then, visit the Motor Vehicle Environmental Protection website, enter the vehicle model number in the input box on the webpage, input the correct verification code, and click 'Query' to access the vehicle's relevant information, including its emission standard. The Toyota IZOA is positioned as a new-generation stylish SUV, with body dimensions of 4360mm in length, 1796mm in width, and 1555mm in height, and a wheelbase of 2640mm. In terms of power, the IZOA is equipped with a TNGA 2.0L jet stream control engine, achieving a maximum thermal efficiency of 40%, and can deliver a maximum power output of 126kW and a maximum torque of 203Nm.

2

4

Share

How to Lift Up the Rear Seat of the 10th Generation Accord?

The method to lift up the rear seat of the 10th Generation Accord: There are clips on both front sides of the rear seat where it contacts the vehicle chassis. To remove it, press downward on the top of the clips with your hand, then pull the clips forward to lift the rear seat. The battery size of the 10th Generation Accord is significantly smaller than the previous generation. The rear seats can be folded down, and the trunk space has greatly improved compared to the previous generation. The 10th Generation Accord is a vehicle launched by GAC Honda, with body dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm.

11

1

Share

What are the reasons for a motorcycle ignition coil having electricity but failing to start?

Reasons for a motorcycle ignition coil having electricity but failing to start: damaged injection unit, or no fuel injection or 5A fuse blown; poor contact of the angle mark signal sensor; weak magnetic field of the machine; battery failure; issues with the ignition system wiring; poor fuel flow; low-quality gasoline; engine failure. Exclusion methods are as follows: Replace the fuse: When turning on the car key, if there is no self-test sound from the injector, visually check if the fuse is blown and replace it if necessary. Replace the injector: If there is a self-test sound, remove the injector (keeping the connector connected), press the start button to observe the fuel injection status, and replace the injector if necessary. Check the connection of the angle mark line and repair it. Check the magneto: Check the strength of the magneto signal, etc.

19

1

Share

How Long Can a Car Drive Continuously Before Needing a Break?

After driving continuously for 4 hours, the car should take a break at a service area for at least twenty minutes. Below are some precautions regarding highway driving: 1. Speed: (1) For novice drivers on the highway, the speed should generally be between 80~100, with 90 being the recommended cruising speed. (2) When exiting the highway and entering the ramp, apply the brakes twice: first, when you see the 500-meter exit sign, reduce speed to 60~70; second, when entering the ramp, reduce speed to 40. 2. Driving and Lane Changing: Generally, there is no need to change lanes or merge. Others can only overtake from the right, and when overtaking others, do so directly.

9

5

Share

How long must the 12-point penalty for intentionally obscuring a license plate be processed?

Intentionally obscuring a license plate results in a 12-point penalty, and generally, the offender must report to the public security authorities within 15 days for processing. If the penalty is not addressed within 15 days, the public security authorities will directly revoke the driver's license. Article 11 of the Road Traffic Safety Law: When driving a motor vehicle on the road, the vehicle must display its license plate, inspection qualification mark, and insurance mark, and carry the vehicle registration certificate. The license plate must be displayed as required, kept clear and intact, and must not be intentionally obscured or damaged. Article 13 of the Regulations for the Implementation of the Road Traffic Safety Law: The license plate of a motor vehicle must be displayed at the designated positions on the front and rear of the vehicle, kept clear and intact. Heavy and medium-duty trucks and their trailers, tractors and their trailers must have their enlarged license plate numbers painted on the rear of the body or carriage, with the characters upright and clear. The inspection qualification mark and insurance mark must be affixed to the upper right corner of the front windshield of the motor vehicle.

20

1

Share

Does Car Antifreeze Need to Be Replaced?

Car antifreeze does need to be replaced. For vehicles that operate for long periods, such as taxis, high-quality antifreeze should generally be replaced once a year. For vehicles with shorter operating times, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foam formation, which can reduce the heat exchange efficiency between the antifreeze and engine components, ensure the product is within its validity period when adding it. Long-lasting antifreeze can have a validity period of up to three years. If suspended particles, sediment, discoloration, or deterioration are observed in the antifreeze, it should be replaced promptly, and the system should be cleaned. Method for replacing antifreeze: Drain the old antifreeze and then flush the fluid channels with clean water. Add clean water to the antifreeze reservoir, then continue adding water to ensure a continuous flow through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir will have a faint pink tint. Continue adding clean water until the drained water runs clear. Note: Remember to disconnect the heater hose and drain all water from the heater core. Approximately one hour after draining, add new antifreeze through the radiator hose to allow it to flow quickly into the radiator. Then, add another container of antifreeze to the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the system. Top up the antifreeze to the "MAX" mark on the reservoir.

1

Share

What Causes the Sudden Hardness and Inability to Press Down the Brake in an Electric Vehicle?

Is the Toyota IZOA compliant with China National VI emission standards?

How to Lift Up the Rear Seat of the 10th Generation Accord?

What are the reasons for a motorcycle ignition coil having electricity but failing to start?

How Long Can a Car Drive Continuously Before Needing a Break?

How long must the 12-point penalty for intentionally obscuring a license plate be processed?

Does Car Antifreeze Need to Be Replaced?

How Many Kilometers Should a Heavy Truck Go Before Changing Engine Oil?

What is the box on top of a car used for?

Does Engine Oil Leakage Require an Overhaul?

What is the solution to the rattling noise in the Emgrand sunroof?