···
Log in / Register

What causes the sudden engine fault display while driving a Civic?

3 Answers
ClaraLynn
08/27/25 5:05am
Civic suddenly displaying engine fault while driving may be caused by the following reasons: Poor combustible mixture ratio: Or incomplete combustion in the engine cylinder leading to an overly rich fuel system. It is necessary to visit an auto repair shop to check the oxygen sensor, replace the fuel injector, and clean the throttle body. Solutions: Check the cleanliness of the throttle body. If the throttle body is too dirty with carbon deposits, clean the carbon deposits from the throttle body and intake manifold. Overly rich fuel system: This may be due to insufficient air in the cylinder and low intake pressure, causing incomplete combustion of fuel in the cylinder. Common issues include a dirty throttle body and intake manifold with carbon deposits, clogged catalytic converter, excessive carbon deposits on spark plugs, or problems with components like the oxygen sensor. Solutions: Remove the spark plugs to check for excessive carbon deposits. If there are excessive carbon deposits, clean the spark plugs. After cleaning, test whether the spark plugs are functioning normally. If the spark plugs are not firing correctly, replace them.
Was this review help?
7
5
Share
ZacharyRose
09/09/25 4:08am
Oh, the engine malfunction indicator light suddenly came on while driving my Civic. It might be related to the electronic systems. For example, a faulty oxygen sensor could cause the ECU to misjudge emission data, triggering the warning light; a crankshaft position sensor failure could affect ignition timing and engine operation; circuit issues like short circuits, poor connections, or ECU software bugs could also trigger error codes. These electronic components are prone to problems as they age, especially with frequent start-stop cycles in city driving exacerbating wear. The key to diagnosis is immediately reading the OBD trouble codes when the light comes on—don't delay. Small issues can turn into costly repairs if neglected. Taking it to a repair shop for a professional diagnostic tool inspection is the most reliable approach. Safety first, don't hesitate.
Was this review help?
11
0
Share
Expand All
MartinRose
10/23/25 4:57am
The check engine light in my Civic came on while driving, and I've encountered several common mechanical causes multiple times. Worn spark plugs with carbon buildup failing to ignite can cause engine shaking and light activation; aging ignition coils with increased resistance lead to misfire warnings; insufficient fuel pump pressure or clogged injectors affecting fuel supply trigger system alerts when power is weak; also, intake vacuum leaks causing excessively lean mixture trigger emission abnormalities. Restarting after parking may temporarily turn off the light but isn't a permanent solution - inspecting spark plugs and replacing coils can resolve many issues. I recommend not forcing continued driving - safely pull over for gradual troubleshooting or go directly for repairs. Early intervention ensures worry-free, cost-effective and safer driving.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

Is the Ground Clearance of Jade Higher Than That of Civic?

Under no-load conditions, the ground clearance of Jade is 195mm. In contrast, the Civic has a ground clearance of approximately 141mm under the same conditions. Therefore, the ground clearance of Jade is higher than that of Civic. Below are the introductions of Jade and Civic: 1. The Jade 1.5T model is equipped with the Honda SENSING safety system, which integrates ACC active cruise control system, LKAS lane keeping assist system, RDM lane departure mitigation system, TSR traffic sign recognition system, LWC blind spot display system, and RWC rear wide-angle camera system. 2. The Civic is equipped with 1.0T and 1.5T engines, as well as manual and CVT transmissions. It features a large number of black elements, including the black front grille, side skirts, the newly added small spoiler, and black glossy alloy wheels.
11
4
Share

What are the effects of low tire pressure in sedans?

The effects of low tire pressure in sedans are as follows: 1. Low tire pressure can lead to increased fuel consumption, heavier steering, and a tendency for the vehicle to drift. It can also cause damage and abnormal wear to the tire bead area, reduced tire strength, and may result in a tire blowout during high-speed driving; 2. Insufficient tire pressure increases the movement of various parts of the tire, leading to excessive rolling that causes abnormal heat buildup. This reduces the functionality of the cords and rubber, potentially causing delamination or cord breakage, and excessive friction between the tire and the rim, resulting in damage and abnormal wear to the tire bead area; 3. The friction between the tire and the ground increases exponentially, leading to a rapid rise in tire temperature, softening of the tire, and a sharp decrease in strength. High-speed driving under these conditions can also cause a tire blowout.
14
0
Share

Where is the oil filter element located on the Kia K3?

The oil filter element of the Kia K3 is located inside the fuel tank and assembled together with the fuel pump. To access it, you need to open the fuel tank cap, disassemble the fuel pump assembly, replace the fuel filter, and then reassemble it with the fuel pump. Alternatively, you can replace the entire assembly including the fuel pump. The oil filter element, also known as the oil filter, functions to remove debris, gum, and moisture from the engine oil, delivering clean oil to various lubrication points. More details are as follows: 1. Most vehicles are equipped with spin-on oil filter elements, which are disposable and not cleanable. Therefore, it is recommended to replace the oil filter element when changing the engine oil. Failing to do so may affect the quality of the lubricating oil. Generally, it is advisable to replace the oil filter every 5,000 kilometers. 2. To reduce friction resistance between moving parts in the engine and minimize component wear, engine oil is continuously delivered to the friction surfaces of moving parts, forming a lubricating oil film for lubrication. 3. There are many types of oil filter elements, including those for screw-type air compressors, as well as models like WK962/7 and WK940/20. Different vehicle models require different oil filter elements, and even a slight mismatch can prevent proper installation.
19
4
Share

How to solve the SVS fault in Jiangling vehicles?

The solution for the SVS light turning on is to start the engine first. If it fails to start, the fuel pump might be malfunctioning, preventing the normal supply of fuel to the engine. However, the fault can also affect the normal use of the vehicle, such as causing body shaking and increased fuel consumption. In such cases, it is advisable to take the vehicle to a repair shop for a comprehensive inspection.
10
2
Share

What are the reasons for a car constantly shaking?

Reasons for a car constantly shaking: 1. Severe engine carbon buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon deposits in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts, making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits is sucked into the combustion chamber by the engine's vacuum, making the air-fuel mixture too rich. This fluctuation between lean and rich mixtures causes the engine to shake at idle after a cold start. The lower the temperature, the more fuel is needed for a cold start, and the presence of carbon deposits significantly affects the success of the cold start. 2. Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or weak sparking from the spark plugs can also cause severe shaking during cold starts. 3. Unstable fuel pressure: If you have already cleaned the engine carbon deposits, throttle body, replaced gaskets, and spark plugs but still notice shaking at idle, it is recommended to visit a 4S shop to check the fuel supply pressure and the intake pressure sensor. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can both cause the car to shake. 4. Aging engine components: Car shaking can also be related to the aging of engine mounts (also known as engine mounts or cushions). Engine mounts act as the engine's shock absorption system, absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations will be transmitted to the steering wheel and the cabin, causing shaking at idle.
14
5
Share

How to align the timing chain on the Jianghuai Refine M3?

Check through the spark plug hole and manually rotate the crankshaft pulley fixing bolt with a wrench or socket. Insert the No. 1 special tool tightly into the timing groove of the intake and exhaust camshafts from the rear plane area of the cylinder head.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.