What Causes the Steering Wheel to Become Stiff?

1 Answers
MacJohnny
07/29/25 6:33pm
The reasons for a stiff steering wheel are: 1. Dirty power steering fluid; 2. Short circuit or ground fault in the electric power steering fuse; 3. High temperature in the steering gear caused by repeated turning at standstill or low speed with electric power steering; 4. Insufficient tire pressure. Precautions for using the steering wheel include: 1. Do not remove both hands from the steering wheel simultaneously; 2. Keep the positions of the left and right hands on the steering wheel not too close to each other; 3. The amplitude and speed of steering wheel rotation should match the turning angle of the car and the vehicle's speed; 4. Do not hold the steering wheel from the inside; 5. Avoid turning the steering wheel when the car is stationary to prevent damage to the steering system and tire wear.
Was this review help?
1
2
Share
More Forum Discussions

What to Do If You Accidentally Enter a Wrong-Way Lane When Turning Right?

If a car accidentally enters a wrong-way lane after turning right, it must stop immediately, pull over to the side with hazard lights on, and call the traffic police for assistance. Wrong-way driving on a one-way street refers to the act of making a U-turn on a road designated for one direction of travel and proceeding in the opposite direction. Consequences of Wrong-Way Driving on a One-Way Street: This behavior is prone to causing traffic accidents and is strictly prohibited by law. On highways, wrong-way driving results in an immediate deduction of 12 points from the driver's license, a fine of 200 yuan, and possible suspension of the driver's license for twelve months. System Delays in Traffic Violation Query Platforms May Cause Delays in Clearing Fine Records: From the moment a violation occurs, it undergoes steps such as being captured, confirmed, and publicized. Similarly, processing the violation's point deduction and paying the fine also requires the system to follow corresponding procedures.
18
1
Share

Is the Hongqi HS5 compliant with China VI emission standards?

Hongqi HS5 meets the China VI emission standards. Here is relevant information: 1. China's sixth-stage motor vehicle pollutant emission standards refer to the standards established to implement the "Environmental Protection Law of the People's Republic of China" and the "Air Pollution Prevention and Control Law of the People's Republic of China," aiming to prevent pollution from the exhaust of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. 2. The early implementation of China VI standards will be divided into two phases. The first phase requires all light-duty diesel vehicles sold from July 1, 2018, to comply with China VI standards. 3. The second phase requires all light-duty gasoline vehicles sold from January 1, 2019, to comply with China VI standards. During these two phases, light-duty diesel and gasoline vehicles that do not meet the standards and are sold or transferred in Shenzhen will not be eligible for registration. Additionally, according to the notice, all vehicles transferred into Shenzhen from other regions must also strictly comply with China VI standards.
5
2
Share

How Many Months Define Inventory Vehicles?

Inventory vehicles are actually just a common term, their true meaning refers to new cars that have left the factory but remain unsold. Regarding the definition of inventory vehicles, there are no national regulations specifying how many months qualify a car as an inventory vehicle. However, the industry generally considers cars that have been in stock for over 3 months or half a year as inventory vehicles. Below is an introduction to inventory vehicles: 1. Introduction: The so-called 'inventory vehicle' lacks a clear legal definition, but the term indeed exists in the automotive sales industry, typically referring to cars that remain unsold for more than three months after leaving the factory. 2. Identification: Firstly, the manufacturing date is clearly stated on the vehicle's nameplate, and secondly, dealers do not conceal the identity of inventory vehicles because it's simply impossible to hide. 3. Handling: After cleaning a newly acquired inventory vehicle, if you find its paint surface still rough and dull, or even with many fine scratches, then considering waxing is advisable.
12
5
Share

How to Cancel the Maintenance Light on Tiggo 5?

Here is the method to reset the maintenance light for Tiggo 5: 1. Press and hold the instrument adjustment button, then turn on the ignition switch. 2. Continue holding the adjustment button for 3 seconds, then release it. The maintenance indicator light will automatically reset. Below is some related information: 1. The "SERVICE" sign on the dashboard display is the maintenance cycle indicator. When the ignition switch is in the ON position, the "SERVICE" sign on the display will flash. If the sign disappears after starting the engine, it indicates that the vehicle requires maintenance, and the maintenance light should be reset after servicing. 2. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Modern car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.
13
4
Share

What is the minimum ground clearance of the Mercedes-Benz GLB chassis?

The minimum ground clearance of the UK Mercedes-Benz GLB is 123mm. Here is the relevant information: 1. Minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when the car is fully loaded and stationary. It is used to characterize the car's ability to pass over obstacles such as stones and tree stumps without collision. The smaller the ground clearance, the worse the ability to overcome obstacles. 2. The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability. 3. The design of the minimum ground clearance must take into account the passability of loading and unloading platforms during transportation, and the possibility that the car will not scrape when approaching the edge of ordinary sidewalks. If the vehicle is intended for sale in a specific country or region, the local road quality must also be considered.
16
2
Share

How long does it take for the Haval H6 to automatically lock?

The Haval H6 can automatically lock if no door is opened within 30 seconds. The automatic locking feature of the Haval H6 does not need to be activated. After unlocking, if no door is opened within 30 seconds, the car will automatically lock. When the speed exceeds 15 kilometers per hour, the doors will automatically lock. Benefits of automatic door locking: If a car does not have an automatic locking feature, it can be installed at a 4S store. Automatic locking helps prevent theft by locking the doors once the car starts moving. It also effectively prevents sudden boarding during traffic jams or while waiting at traffic lights, providing a certain level of security. Pros and cons of the automatic locking feature: This feature can prevent mischievous children from opening the doors while the car is in motion. However, if the electronic device malfunctions, it can cause trouble. If passengers can open the doors manually, there won't be an issue. But if a passenger becomes unconscious or similar, it could create significant obstacles for rescue efforts and even cause harm during the rescue process.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.