What Causes the Steering Wheel to Become Hard to Turn?

1 Answers
Josiah
07/28/25 10:38pm
Steering wheel becomes hard to turn due to insufficient power steering fluid, low tire pressure, or malfunction of the steering gear or power steering pump. Insufficient power steering fluid: Power steering fluid is a medium oil used in the car's power steering pump, serving to transmit steering force and provide cushioning. The power steering fluid needs to be replaced regularly, and checked for leaks. When the fluid is insufficient, the steering will feel heavy and stiff. The power steering fluid should be replaced or replenished as soon as possible to ensure normal vehicle operation. Low tire pressure: Low tire pressure increases the contact area between the tire and the road surface, leading to greater friction and making steering more difficult, resulting in a heavy steering wheel, which is not conducive to driving safety. Tire pressure should be checked frequently, and if the pressure is insufficient, it should be replenished promptly to ensure normal vehicle operation. Steering gear or power steering pump malfunction: The steering gear and power steering pump also affect the car's steering. Any malfunction in these two critical components can cause steering difficulties. Issues such as universal joints, chassis suspension stabilizer bars, or plain bearings should not be overlooked. Any problems detected should be repaired promptly.
Was this review help?
16
2
Share
More Forum Discussions

Can speakers be installed in the trunk of the Volkswagen Lamando?

Speakers can be installed in the trunk of the Volkswagen Lamando. Speakers: Speakers are the audio signal devices in cars. During driving, the driver emits necessary audio signals as required and regulated to warn pedestrians and attract the attention of other vehicles, ensuring traffic safety. They are also used for urging movement and transmitting signals. Working principle of speakers: Car electric speakers produce sound through the vibration of metal diaphragms. They consist of an iron core, magnetic coil, contacts, armature, diaphragm, etc. When the driver presses the horn switch, current flows through the contacts to the coil, generating magnetic force that pulls down the armature, forcing the diaphragm to move. The movement of the armature disconnects the contacts, interrupting the current and causing the magnetic force of the coil to disappear. The diaphragm, along with the armature, returns to its original position under its own elasticity and the action of the spring plate, closing the contacts and reconnecting the circuit. Current then flows through the contacts to the coil again, generating magnetic force and repeating the above actions. This cycle continues, causing the diaphragm to vibrate continuously and produce sound.
1
1
Share

Are Corolla Tires Tubeless?

Corolla tires are tubeless tires. Tubeless Tires: Tubeless tires, also known as low-pressure tires or pneumatic tires, are inflatable tires without inner tubes. Tubeless tires have high elasticity and wear resistance, as well as good adhesion and heat dissipation performance. Advantages of Tubeless Tires: Puncture resistance: The surface of a tubeless tire is made of high-quality rubber. After inflation, the surface tension increases, forming a certain pressure on the inner surface, which enhances the self-sealing ability against punctures. Once punctured, the air will not leak out instantly but will sustain for a certain period, ensuring safety during high-speed driving. Super wear resistance: The rim diameter of tubeless tires is larger than that of ordinary rims, so they are not affected by the heat from brake drums during driving. Since there are no inner tubes or liners, the tire and wheel rim are sealed as one unit. The high temperature generated by friction between the tire and the road surface during high-speed driving is directly dissipated through the steel rim, quickly reducing the tire temperature and thus extending the tire's service life. Low fuel consumption: The crown angle of tubeless tires is zero, resulting in strong adhesion. This helps maintain better driving stability and lower friction, contributing to shock absorption and increased speed.
17
4
Share

How long is the Jaguar XJL body?

Jaguar XJ model has a body length of 5265mm. The reasons for Jaguar XJ turbo failure are as follows: Oil leakage: High oil consumption but normal exhaust color without power loss; usually caused by oil leakage. The solution is to check for oil leaks in the external oil pipes of the engine lubrication system. Turbocharger compressor end oil leakage: High oil consumption with blue smoke from the exhaust, but no power loss. Reasons for unstable idle speed during morning cold starts: Intake manifold air leaks: When unauthorized air, gasoline vapor, or combustion exhaust enters the intake manifold. Excessive valve carbon deposits: Too much carbon buildup on the throttle valve and surrounding intake passages. Intake system component failure: Malfunction or damage to the engine intake system components, causing unstable idle speed.
18
5
Share

Reasons Why the Skoda Octavia Tire Pressure Light Cannot Be Reset

When the tire pressure monitoring symbol appears on the Skoda Octavia, it can only be cleared after performing a tire pressure reset. Tire Pressure Monitoring Light On: The tire pressure monitoring indicator is a yellow symbol—an irregular circle without a seal on top, with four small spikes at the bottom and an exclamation mark inside. The illumination of this light indicates abnormal tire pressure. Abnormal tire pressure can generally be attributed to the following reasons: Abnormal Tire Pressure: An alert is typically triggered when the pressure is below 1.8 bar or exceeds 3.0 bar. In such cases, tire inspection and pressure adjustment are required. Tire Pressure Monitoring Not Reset: After inflating the tires, if the tire pressure reset is not performed promptly, the system continues to record the previous data, causing the tire pressure monitoring light to remain on. A simple tire pressure reset will resolve this issue. Damaged Tire Pressure Sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. In such cases, the only solution is to replace the sensor with a new one.
1
4
Share

How much engine oil should be added to the Morui 500?

The Morui 500 motorcycle's engine requires approximately 2.5 liters of oil, with the exact amount to be verified by checking the oil level window at the bottom of the right engine cover. Precautions: The maintenance method for concrete pump trucks should follow the corresponding requirements and procedures outlined in the maintenance manual, with inspections conducted before and after use. Refer to the lubrication chart in the operation and maintenance manual to ensure timely and adequate lubrication of all pump truck components. Oil Change: Select the specified type of hydraulic oil and replace the oil used in the hydraulic system at regular intervals. In accordance with the maintenance methods and requirements for concrete pump trucks provided in the instruction manual, regularly inspect the water tank, concrete cylinder, and concrete pipeline of the pump system. Periodically check and adjust the torque of the boom rotation base fixing bolts.
17
3
Share

Can 5w40 engine oil be used in summer?

5w40 engine oil can be used in summer. Engine oil, also known as engine lubricant, serves multiple functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. Often referred to as the 'blood' of a car, engine oil consists of base oil and additives. The base oil is the primary component of lubricating oil, determining its fundamental properties, while additives compensate for and enhance the performance shortcomings of the base oil. The engine is the heart of a car, containing many metal surfaces that move against each other at high speeds in harsh environments, with operating temperatures reaching 400 to 600 degrees Celsius. Under such severe conditions, only qualified lubricating oil can reduce engine component wear and extend service life.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.