What Causes the Steering Wheel Noise in Geely Binyue?

2 Answers
AthenaFitz
07/28/25 9:20pm
Here are the specific reasons for the steering wheel noise in Geely Binyue: Faulty Clock Spring: If the noise comes from inside the steering wheel, it may be due to interference from the clock spring inside the steering wheel. Lack of Lubrication in Shock Absorber Top Bearing: When turning the steering wheel, if the noise comes from outside the vehicle, it may be caused by a lack of lubrication in the shock absorber's top bearing. Loose Stabilizer Bar Bushings: If the noise is not from the shock absorber's top bearing, check whether the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings can cause noise not only when turning the steering wheel but also when driving on uneven roads. Dirty Power Steering Fluid: If the power steering fluid is too dirty, it can increase the pressure in the power steering system.
Was this review help?
5
1
Share
MaggieMarie
08/12/25 2:00am
I've noticed that after driving the Geely Binrui for a long time, there's an abnormal noise from the steering wheel, which is quite common and likely caused by aging components in the steering system. Having driven this car for several years myself, I feel that the noise mostly occurs during turns or on bumpy roads, like wear in the steering column bearings or loose ball joints. These parts endure pressure and vibration daily, so it's natural for them to loosen and produce creaking sounds. It's advisable to regularly apply some lubricating grease to the components connected to the steering wheel, which can reduce friction. However, over time, it's still necessary to have them checked by a professional to prevent the issue from escalating into a major safety concern. Temperature changes also play a significant role, with metal contraction in winter making the noise more noticeable. Slowing down when turning the steering wheel and avoiding sudden movements can help protect the components and delay wear. In summary, first listen to locate the noise. If it seems to come from the chassis, it might also be a suspension issue, and you should visit a repair shop for a comprehensive check as soon as possible. It won't cost much but can prevent potential hazards.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

What are the reasons for an automatic shutdown of a gasoline engine?

Gasoline engines may shut down automatically due to fuel depletion or fuel line blockage. Below is relevant information about gasoline engines: 1. Introduction: A gasoline engine is an internal combustion engine that converts thermal energy into mechanical energy using gasoline as fuel. Due to gasoline's low viscosity and rapid evaporation characteristics, fuel injection systems can spray gasoline into the cylinders. After compression reaches certain temperature and pressure levels, spark plugs ignite the mixture, causing gas expansion that performs work. 2. Characteristics: Gasoline engines feature high rotational speeds, simple structures, lightweight designs, low manufacturing costs, smooth operation, and convenient maintenance. They are widely used in automobiles, particularly in small vehicles.
15
3
Share

Will a 3M adhesive spoiler fall off over time?

A 3M adhesive spoiler will not fall off even after a long time. Here are the methods to remove a 3M adhesive spoiler: 1. Adhesive softening: Use a hairdryer to slowly heat and soften the adhesive, then wipe it off with an eraser or use an adhesive remover. The adhesive remover can easily remove various types of adhesive residues. It can also peel off adhesive labels stuck on car windows, body surfaces, paint surfaces, glass, marble surfaces, etc. 2. Removing paste: It can also easily remove residual paste substances left after tearing off glass glue, asphalt, or adhesive labels with just a spray and wipe. Before use, shake the can well. Do not invert the can when spraying the product. Slightly peel off the adhesive label. 3. Removing adhesive labels: Spray the product evenly from 20 to 40 centimeters away from the paper adhesive label. After the solution soaks in, gently peel off the adhesive label.
6
0
Share

What Causes Car Compressor Refrigerant Leakage?

The cause of car compressor refrigerant leakage is due to pipeline sealing issues and corrosion of the condenser and evaporator. Below is a detailed introduction to the repair methods for car air conditioning refrigerant leaks: 1. Welding Repair: After identifying the leak point, welding can be used to repair cracks and pinholes in the air conditioning pipes. If the pipe cannot be repaired, it must be replaced. 2. Vacuum Exhaust: After confirming that the repaired air conditioning pipe no longer leaks, vacuum exhaust must be performed. This involves removing all gas and moisture from the air conditioning pipeline. 3. Replenishing Refrigerant: After vacuum exhaust, the air conditioning system must be replenished with new refrigerant.
11
0
Share

What are the solutions for a loud engine sound?

Solutions for a loud engine sound are as follows: 1. Loose belt: Check if the belt is loose, as a loose belt can cause the sound in the engine compartment to become louder. If you cannot identify the issue, it is recommended to visit a 4S shop or a professional repair shop for inspection. 2. Aging phenomenon: When the engine noise is significant, it is usually due to aging inside the engine, which leads to increased vibration and noise during operation. When the engine noise becomes louder, you can start by cleaning the engine to remove accumulated dust inside, effectively reducing the engine noise.
17
5
Share

How to Distinguish Between Intake and Exhaust Camshaft Letters?

I stands for intake, E stands for exhaust. Below is a related introduction on how to distinguish between intake and exhaust camshafts: 1. You can differentiate them by looking at the screw position and belt position on the camshaft: The intake camshaft usually has a camshaft position sensor installed at the rear or front, making it longer, or there may be a signal disc at the tail. If you can't tell the difference, it's okay—just make a mark when disassembling, and you can basically identify them. 2. The camshaft is installed at the top of the cylinder head and is responsible for driving the intake and exhaust valves to open and close.
12
2
Share

Why Should Right-Turning Vehicles Yield to Left-Turning Vehicles?

Right-turning vehicles should yield to left-turning vehicles because the turning path of left-turning vehicle A is longer. If right-turning vehicle B does not yield to the left-turning vehicle, vehicle A would have to remain stopped in the middle of the intersection for a longer time, causing traffic congestion. Below are relevant introductions about road traffic regulations: 1. Penalty: According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," failing to yield as required results in a 3-point deduction. 2. Rules: (1) When there are traffic signs or markings, yield to the party with the right of way. (2) In the absence of traffic signs or markings, stop and observe before entering the intersection, yielding to vehicles coming from the right.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.