What Causes the Squeaking Sound When a Car Turns?

What Causes the BMW 5 Series Door to Make Noise When Exposed to Water?

Here are the specific reasons why the BMW 5 Series door makes noise when exposed to water: Worn Door Hinges: Use a cloth or tissue to wipe away surface dust, then apply a small amount of lubricating oil with a cotton swab to the door hinges and the marked areas of the door limiter. Open and close the door repeatedly, reapplying the oil and repeating the process until the noise disappears. Avoid applying too much lubricating oil to prevent contamination of other door parts. If the noise persists, it may be due to wear and tear, requiring replacement of new hinges and limiters. Aging Door Seals: Check if the door seals are aging. The seals are made of rubber, so regularly clean the dust and rainwater between the seal gaps to prevent aging. Since sand and dust can easily accumulate in the gaps of the seals, use a brush to frequently clean them, then apply a layer of highly permeable protective agent to prevent the seals from aging. If the seals are severely damaged or significantly aged, they need to be replaced with new ones.

3

Share

What grade of gasoline should be used for the BMW G310R?

BMW G310R should use 95-octane gasoline. The following is an introduction about gasoline: Reasons for using 95-octane gasoline: BMW recommends using 95-octane or higher gasoline, which ensures complete combustion, reduces carbon deposits, and provides quick acceleration response. 95-octane gasoline consists of 95% isooctane and 3% n-heptane. When the engine has a high compression ratio, high-octane gasoline should be used. Using low-octane gasoline in a high-compression engine can cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced driving power. Differences between gasoline grades: Currently, the gasoline grades available on the market are 92, 95, and 98, corresponding to different octane ratings. The higher the octane rating, the better the gasoline's anti-knock performance. When the air-fuel mixture is injected into the engine cylinder, the piston moves upward, and the compressed mixture's temperature rises. If the anti-knock performance is insufficient, the mixture may start burning before the spark plug ignites due to temperature and pressure, causing knocking.

13

3

Share

What does a small turtle on the car dashboard mean?

A small turtle appearing on the car dashboard indicates that the vehicle has encountered a fault but it does not immediately affect driving. It is recommended to limit the speed to 10 km/h to safely reach a repair facility. Here is relevant information about car dashboards: 1. Overview: The car dashboard consists of various gauges, indicators, and especially warning lights and alarms for the driver, providing necessary operational parameter information. Depending on their working principles, they can be broadly categorized into three generations. The first generation of car dashboards used mechanical movements; the second generation is referred to as electrical dashboards; and the third generation comprises fully digital dashboards, which offer richer display content and simpler wiring connections. 2. Fault Diagnosis System: (1) Fault Detection: The input level signals to the microprocessor have a specific range under normal conditions. If signals outside this range are detected, the ECU diagnoses the signal system as abnormal. (2) Fault Classification: When the microcomputer operates normally, diagnostic programs detect abnormal input signals and classify them into minor faults that do not cause obstacles, faults that lead to functional degradation, and major faults. Faults are prioritized and pre-programmed. If the microcomputer itself fails, major faults are classified via the WDT (Watchdog Timer).

8

3

Share

What are the differences between the Challenger 300 and the Duke 600?

The differences between the Challenger 300 and the Duke 600 are as follows: 1. Different Frames: 1. Challenger 300: MERIDA patented HFS technology aluminum alloy frame (with frog legs). 2. Duke 600: MERIDA aluminum alloy frame. 2. Different Hubs: 1. Challenger 300: FORMULA quick-release aluminum alloy disc brake hub. 2. Duke 600: Novatec aluminum alloy front and rear disc brake hubs. 3. Different Front Forks: 1. Challenger 300: SRAM-Rockshox-XC28 hydraulic lockout front fork. 2. Duke 600: Suntour XCM hydraulic lockout front fork. 4. Different Front and Rear Derailleurs: 1. Challenger 300: Front derailleur SHIMANO-M430, rear derailleur SHIMANO-ALIVIO-RD-M430. 2. Duke 600: Front derailleur SHIMANO-M390, rear derailleur SHIMANO-M390.

4

Share

Why does the Audi A6's RPM drop when braking?

Throttle body has carbon deposits; cleaning the throttle body should resolve the issue. Throttle Body: It is a controllable valve that regulates the air entering the engine. After the air enters the intake manifold, it mixes with gasoline to form a combustible mixture. It connects to the air filter at the top and the engine block at the bottom, often referred to as the throat of the car engine. The throttle body is one of the most critical components in today's electronic fuel injection engine systems. The responsiveness of the car's acceleration is closely related to the cleanliness of the throttle body. Cleaning the throttle body can reduce fuel consumption and make the engine more agile and powerful. Precautions for cleaning the throttle body: The frequency of throttle body cleaning largely depends on driving habits and environmental conditions. If there are no symptoms such as unstable idling, engine shaking, significantly increased fuel consumption, or weak acceleration, cleaning is unnecessary. Cleaning should only be performed when these symptoms appear. After cleaning the throttle body, it is essential to use a diagnostic tool to perform data matching and reset the throttle opening angle. This is because the engine control unit (ECU) has memorized the opening angle with carbon deposits. If not reset, the engine may exhibit unstable idling and excessively high RPM.

15

5

Share

Why can't the New Passat's one-key start detect the key?

New Passat's one-key start not detecting the key may be due to a dead smart key battery, damaged smart box sensor, or signal interference. Below are detailed explanations of the possible causes: Dead smart key battery: If the smart key battery is dead, charge it for a while and then try starting the car again. Damaged smart box sensor: For a new car, this issue is unlikely but cannot be completely ruled out. If the smart box sensor is indeed damaged, you can file a complaint at the dealership and request the staff to replace it with a new smart box sensor. Signal interference: If there is interference, try to find a location where the signal can be received by moving around to a suitable spot.

13

1

Share

What Causes the Squeaking Sound When a Car Turns?

What Causes the BMW 5 Series Door to Make Noise When Exposed to Water?

What grade of gasoline should be used for the BMW G310R?

What does a small turtle on the car dashboard mean?

What are the differences between the Challenger 300 and the Duke 600?

Why does the Audi A6's RPM drop when braking?

Why can't the New Passat's one-key start detect the key?

How to Open the Engine Hood of the Sylphy?

What is the fuel tank capacity of the Xiali N7?

What are the tips for driving in snowy weather?

What is the normal pressure standard for automotive air conditioning R134a?