···
Log in / Register

What Causes the Squeaking Sound from the Windshield?

5 Answers
AdrielRose
07/29/2025, 07:51 PM

The squeaking sound from the windshield is caused by loose sealing of the plastic sealing strip at the lower edge of the outer windshield, which allows sand and dirt to enter. Once sand and dirt get into the gaps, they rub against the windshield when driving on bumpy roads, creating the noise. The owner only needs to remove the plastic sealing strip below the windshield, clean out the sand and dirt, then reinstall the sealing strip with added sponge padding. It is normal for a car to develop some noises after long-term use. These noises usually come from the interior, chassis, or engine compartment. To address them, simply identify the source and the component causing the noise, then replace or repair that component.

Was this review help?
17
1
Share
Hugh
08/15/2025, 11:21 PM

I've been driving for over twenty years and have encountered windshield noises quite a few times. That annoying squeaking sound is mostly caused by the aging and hardening of the rubber sealing strips around the windshield. Over time, the rubber shrinks and cracks, creating friction noise when wind blows, especially noticeable in cold weather. In some cases, the wiper arm screws may have loosened, or dust buildup in the rubber strips causes instability. If ignored, the noise can get worse and even affect wiper performance, which can be dangerous by obstructing visibility during rain. I recommend first checking the condition of the seals, wiping the edges clean with a soft cloth, and applying lubricant if necessary—but avoid pulling forcefully to prevent damaging the glass. Safety comes first; regular checks can save a lot of hassle, so don’t wait for small issues to turn into major repairs.

Was this review help?
15
3
Share
Expand All
MalachiDella
10/19/2025, 12:30 AM

I just bought a new car and soon encountered constant noise from the windshield. The squeaking sound makes driving uneasy, especially on the highway where it's even more annoying. After some research, I found that common causes include improperly installed sealing strips during assembly or aging wiper rubber rubbing against the glass, with plastic shrinkage in winter making the issue more likely. I tried gently pressing the windshield, and sometimes the noise location changed, indicating a loose part. Driving long-term with this issue causes psychological stress, fearing it might one day obstruct the driving view. A reminder to everyone: if you notice such unusual noises, get it checked at a repair shop early—don’t skimp on costs. Otherwise, the noise could worsen and become a bigger headache. Regular maintenance can prevent unexpected issues. Minor problems like this aren’t uncommon in daily car use, and keeping up with maintenance ensures peace of mind.

Was this review help?
3
5
Share
Expand All
TravisAnn
12/02/2025, 12:05 AM

As someone who frequently tinkers with car repairs, when I noticed the windshield making noise, I immediately set out to find the cause. First, I pinpoint the source of the sound, such as by gently pressing on the glass to listen. Then, I check if the rubber seals or wiper arms are loose, and clean off any dust if present. If screws are loose, I tighten them, or apply some silicone lubricant to the seals. Be careful not to damage the glass during the process and avoid using excessive force when replacing parts. If the noise persists after DIY attempts, it indicates that the components are severely worn and need replacement. Addressing the issue promptly can prevent water leaks and save the hassle of major repairs.

Was this review help?
2
0
Share
Expand All
AniyahRose
01/22/2026, 01:29 AM

From a safety perspective, windshield rattling is no trivial matter. That creaking sound can be distracting, posing greater risks especially during long-distance driving. The causes are mostly due to deteriorated seals or loosened glass supports caused by body vibrations. Ignoring it may lead to damage to surrounding components or even compromise windshield stability. It's advisable for every car owner to develop the habit of regularly inspecting glass mounting points, cleaning debris to maintain tightness. Upon detecting any noise, immediately pull over to inspect, avoiding high-speed risks - professional repair is the wise choice. Healthy vehicle maintenance starts with attention to detail.

Was this review help?
11
4
Share
Expand All
More Forum Discussions

What is the maintenance interval for the Geely Boyue?

The maintenance interval for the Boyue is 5,000 kilometers. The first maintenance for this vehicle is due at 5,000 kilometers or three months, whichever comes first. After the first maintenance, it should be serviced every 10,000 kilometers. Additional details are as follows: 1. There are two indicators for the first maintenance of a car: These are time and mileage. If the car's mileage has not exceeded 5,000 kilometers, but the usage time has exceeded three months, maintenance should be performed promptly in such cases. 2. Car maintenance is divided into two types: major and minor: The minor maintenance interval is three months or 5,000 kilometers, while the major maintenance interval is 40,000 kilometers. Regardless of the vehicle model, regular maintenance is essential to keep the car in optimal working condition. 3. Minor maintenance: Primarily involves changing the engine oil and oil filter. 4. Major maintenance inspection items: Mainly include replacing the engine oil, oil filter, air filter, cabin air filter, fuel filter, brake fluid, transmission fluid, spark plugs, etc.
12
5
Share

What are the differences between the Audi A4L Progressive and Fashion models?

The Progressive model comes with 225/50R17 tires, while the Fashion model features 245/40R18 tires. Features such as rearview camera, automatic parking, and full LCD instrument panel are optional for the Progressive model but standard for the Fashion model. The Fashion model's LCD instrument panel measures 12.3 inches. Below are some key details about the Audi A4L: 1. Exterior: The Audi A4L measures 4818/1843/1432mm in length, width, and height, with a wheelbase of 2908mm. It features a new hexagonal grille design and sharp headlight clusters. 2. Interior: The dashboard is tilted towards the driver's side, and higher trim levels include a full LCD instrument panel. 3. Powertrain: The A4L is equipped with a 2.0T engine (low/high power) and a 1.4T engine. The 2.0T engine delivers maximum power of 140kW (190hp) and 185kW (252hp), with the low-power 2.0T model labeled as 40TFSI and the high-power 2.0T model as 45TFSI. The 1.4T engine produces a maximum power of 110kW (150hp).
11
2
Share

What is the Rear Axle Ratio?

Rear axle ratio is an important parameter of the engine, commonly known as the rear axle ratio, and its academic name is the final drive ratio. The rear axle ratio refers to the gear transmission ratio of the main reducer in the vehicle's drive axle. It is equal to the ratio of the rotational angular velocity of the driveshaft to that of the axle's half-shaft, and also equals the ratio of their rotational speeds. Additional information: 1. Speed ratio: The speed ratio of the vehicle's drive axle, also known as the speed ratio of the main reducer assembly, can be understood as the amplification of the torque transmitted from the driveshaft, indicating how much force is needed to propel the vehicle. 2. Higher ratio, higher torque: The larger the ratio, the greater the output torque, and the slower the output speed. To achieve greater power (torque) output for the vehicle, suitable for climbing or heavy loads, a relatively larger final drive ratio (e.g., 6.83) can be selected to meet the requirements, though this sacrifices speed. 3. Lower ratio, lower torque: The smaller the speed and torque ratio, the smaller the output torque, and the faster the output speed. By selecting a relatively smaller final drive ratio (e.g., 3.89), the need for higher speed can be achieved.
20
3
Share

Where is the production date of Fengfan battery?

The production date of Fengfan battery is composed of a series of Arabic numerals and English letters, located on the surface of the battery. For example, a Fengfan battery marked as 4A0735331 indicates that 4 represents the year 2014, A stands for January (A is January, B is February, and so on), and 07 represents the 7th day of the month. The following 35331 identifier refers to the production unit code and team number. Car battery maintenance tips: 1. The car should be driven regularly: Especially for new cars, it is recommended that owners drive them periodically. Long-term parking can gradually deplete the battery's charge, leading to a dead battery over time. It is advisable to drive the car out for a period every few days to recharge the battery, keeping it as fully charged as possible, preferably for more than 20 minutes of driving time. 2. Minimize electrical usage after turning off the engine: Listening to music after turning off the engine is a common practice during daily car use, especially while waiting. Many people enjoy listening to music, but in the off state, the car consumes the battery's power. Prolonged use may drain the battery, resulting in an inability to start the car. It is recommended that owners avoid using electrical devices after turning off the engine. 3. Clean the battery regularly: During daily driving, it is necessary to clean the car battery. Use a cloth to wipe off dust, oil stains, white powder, and other contaminants that may cause leakage from the panel and the positive and negative terminals. Avoid using a wet cloth.
19
4
Share

What Type of Road is a 4.11 Gear Ratio Suitable For?

4.11 gear ratio is suitable for flat highways. The automotive transmission ratio refers to the ratio of rotational speeds between the front and rear transmission mechanisms in a vehicle's drivetrain. There are two types of transmission ratios in a vehicle's drivetrain: the final drive ratio and the gearbox ratio. Below is relevant information about gear ratios: 1. Driving Performance: In the same vehicle model, the final drive ratio is a fixed value, while the gearbox ratio varies depending on the selected gear. Data on gear ratios for various types of vehicles can be found in automotive performance manuals. Driving performance includes acceleration, torque response of the powertrain, noise, and vibration. Larger displacement engines provide greater, faster, and smoother torque responses. 2. Reducing Fuel Consumption: Front-wheel-drive systems generally offer better torque response than rear-wheel-drive systems. If the minimum transmission ratio is too small, the vehicle will struggle under heavy loads, resulting in poor acceleration, noise, and vibration. Conversely, if the minimum transmission ratio is too large, fuel economy suffers, and engine noise increases at high speeds. More gear ratios provide more opportunities for the engine to operate at its maximum power, enhancing the vehicle's acceleration and climbing ability. In terms of fuel consumption, it also increases the likelihood of the engine operating within the low fuel consumption rate range, thereby reducing fuel consumption.
7
2
Share

How is the China VI vehicle marked?

China VI vehicles do not have special markings. Generally, the information can be found on the vehicle acceptance sheet, which includes details such as the model, color, emission standard, engine number, and chassis number. The China VI identifier is 'Ⅵ'. The symbols for China 1 to China 6 standards are I, II, III, IV, V, and VI, respectively. On July 1, 2000, China first introduced the China 1 emission standard. Following the European emission standards and aligning with international norms, the symbols from China 1 to China 6 adopted Roman numerals. New emission standards have been introduced every few years since then. Below are methods to check a vehicle's emission standard: 1. Vehicle Conformity Certificate: When purchasing a car, always request relevant documents and certificates from the salesperson. The Vehicle Conformity Certificate clearly states the vehicle's emission standard. Although it may not explicitly mention whether the vehicle is China 5 or China 6, the emission standard can be clearly determined from this document. 2. Environmental Information Vehicle List: The Environmental Information Vehicle List details the vehicle's environmental impact, including its exhaust emission standard. It directly and clearly indicates the vehicle's emission stage—whether it is China 5 or China 6. By reviewing this list, the vehicle's exhaust emission stage can be easily identified. 3. Vehicle Qualification Certificate: The vehicle's emission standard is clearly stated on the relevant qualification certificate.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.