What causes the squeaking noise when the Mazda 6 air conditioner is turned on?

Can ID Photos with Glasses Pass the Review?

ID photos with glasses can pass the review. For those who wear glasses, please clean the lenses and adjust the frames to be level. If conditions permit, you can prepare a pair of frameless glasses. When taking the photo, push the frames up and tighten them to prevent the frames from covering the eyes. For those with high prescriptions, it is best to use frames to avoid lens reflections. The best time to take the photo is in the morning after a good night's sleep or in the afternoon after a nap, when you are energetic and expressive. Methods to take a good ID photo: Don't lower your head too much: The most correct way is to slightly raise your head and press your tongue against the roof of your mouth, which will tighten the facial lines, hide the double chin, and make the neck appear slimmer. Clothing: The only requirement for clothing is not to wear white, as the background is usually red or blue, and white clothing may not stand out. It is best to choose dark blue or dark black. Additionally, avoid wearing round-neck or high-neck sweaters, as they not only make the neck appear shorter and the face fuller but also make the person look bulky.

8

1

Share

Will unresolved motorcycle traffic violations affect the car driver's license?

Motorcycle traffic violations will affect the car driver's license, as the two licenses are now combined. A single driver's license will have points deducted for both motorcycle and car violations - motorcycle violations deduct points from the same license. Important note: If a motorcycle violation results in point deductions, it won't affect obtaining a driver's license. However, when registering a new car, if the motorcycle owner's name matches the car owner's name, it will affect the registration process - the motorcycle violations must be cleared first. Handling method: For minor motorcycle violations like speeding or running red lights, simply paying the fine is sufficient. For serious motorcycle violations that violate road traffic safety laws and regulations, resulting in major accidents constituting a crime, criminal liability shall be pursued according to law, and the traffic management department of the public security organ will revoke the motor vehicle driver's license.

19

4

Share

What is 220kpa in tire pressure?

220kpa is equivalent to 2.2bar tire pressure. Tire pressure is a crucial factor affecting tire lifespan and fuel economy. Incorrect tire pressure selection can lead to power cycling, increasing tire wear and reducing service life. Additionally, considering the impact on vehicle performance, it is essential to choose the appropriate tire pressure to extend tire longevity. Standard tire pressure can usually be found in the vehicle's user manual, on the label near the driver's side door (B-pillar), in the drawer next to the driver's seat, or on the fuel tank cap. The recommended tire pressure should be based on the manufacturer's specifications, as it is determined by factors such as vehicle weight and chassis height. Pressure unit conversion: 1bar=100kpa=14.5psi; Standard tire pressure: 2.2bar=220kpa=31.9psi; Full-size spare tire pressure: 2.8bar=280kpa=40.6psi; Compact spare tire pressure: 4.2bar=420kpa=60.9psi. According to the international GBT2978-2008 standard, automotive tire pressures are categorized into two types: Low-pressure tires: Inflation pressure ranges from 0.1471 to 0.490MPa (1.5 to 5kg/cm²). Low-pressure tires are generally used in private vehicles; typical passenger car tire pressure ranges from 0.2 to 0.25MPa. High-pressure tires: Inflation pressure ranges from 0.5 to 0.7MPa (5 to 7kg/cm²). High-pressure tires are suitable for large trucks/buses, with typical inflation pressure around 0.5MPa. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; Increased steering wheel vibration and deviation, reducing driving comfort; Accelerated wear on the central tread pattern, shortening tire lifespan; Increased vehicle vibration, indirectly affecting the lifespan of other components; Excessive stretching of tire cords, reducing elasticity and increasing load during driving; Decreased puncture resistance. Sharp objects like nails or glass can easily penetrate the tire, causing internal cracks or blowouts. Hazards of underinflated tires: Increased friction with the road surface, leading to higher fuel consumption; Heavier steering wheel and increased risk of deviation, compromising driving safety; Excessive movement of tire components, causing abnormal heat generation due to over-flexing; Reduced functionality of cords and rubber, leading to delamination or cord breakage, and damage to the bead area due to excessive friction with the rim; Exponentially increased friction with the ground, rapid temperature rise, softening of the tire, and sudden loss of strength, which may cause blowouts during high-speed driving; Increased tire deformation, leading to sidewall cracks, excessive heat generation, rubber aging, cord fatigue, and accelerated shoulder wear due to increased contact area. If no visible damage is detected when tire pressure is low, simply inflate to the normal pressure and reset the tire pressure monitoring system. If a puncture is found during inspection, promptly drive to a tire shop for repair and reinflation. If the tire pressure warning reappears after inflation without any puncture, it may be due to a leaking rim caused by deformation. It is recommended to inspect and replace the rim if necessary.

17

4

Share

What is the normal throttle opening degree?

During idle, the throttle opening degree is generally between 2~5 degrees. Throttle introduction: The throttle is the most important component of today's electronically fuel-injected engine systems. Its upper part connects to the air filter, and the lower part connects to the engine block, serving as the throat of the car engine. The throttle opening degree refers to the opening angle of the engine throttle. The driver adjusts this angle via the accelerator pedal, and different throttle opening degrees indicate different engine operating conditions. Notes: During idle, the engine speed is related to the throttle opening degree. If the throttle angle is too large, it will cause the engine speed to be too high. If the opening degree is too small, it may lead to engine shaking or even stalling.

10

4

Share

Why Does the Radiator Lose Water?

The reasons for radiator water loss are: 1. Leakage at hose connections or the hoses themselves; 2. Cracks in the engine block, or a loose/damaged cylinder head gasket; 3. Damaged seals or sand holes in the oil cooler causing water mixing; 4. Loose radiator cap; 5. Leakage in the heater radiator. Radiator maintenance methods include: 1. Avoid contact with any acid, alkali, or other corrosive substances; 2. Use softened hard water to prevent internal clogging and scale formation; 3. During installation, avoid damaging the cooling fins or denting the radiator to maintain its cooling efficiency and sealing performance.

4

5

Share

What are the new regulations for 5-seater vehicle annual inspection in 2021?

The new regulations for passenger car annual inspection stipulate that vehicles under 5 years old must be inspected once a year, while vehicles over 5 years old require inspection every 6 months. The relevant introduction to annual inspection is as follows: Introduction to annual inspection: Vehicle annual inspection, also known as motor vehicle annual inspection, involves checking whether the engine, chassis, body, and auxiliary equipment are clean, complete, and functional; whether the paint surface is uniform and aesthetically pleasing; whether major assemblies have been replaced and match the initial inspection records. It also verifies whether the vehicle's braking performance, steering control, lighting, exhaust, and other safety features comply with the technical requirements for safe motor vehicle operation. The inspection checks if the vehicle has been modified, remodeled, or altered, and whether the registration details in the driving license, license plate, and vehicle records match the current condition of the vehicle, including any changes or whether approval and modification procedures have been completed. It also examines whether the license plate, driving license, and enlarged license plate markings on the vehicle are damaged, altered, or illegible, and whether they need replacement. The role of vehicle annual inspection: Vehicle annual inspection helps promptly eliminate potential safety hazards, encourages better vehicle maintenance, and reduces the occurrence of traffic accidents.

15

4

Share

What causes the squeaking noise when the Mazda 6 air conditioner is turned on?

Can ID Photos with Glasses Pass the Review?

Will unresolved motorcycle traffic violations affect the car driver's license?

What is 220kpa in tire pressure?

What is the normal throttle opening degree?

Why Does the Radiator Lose Water?

What are the new regulations for 5-seater vehicle annual inspection in 2021?

Can I still retrieve my car after it has been impounded by traffic police for three years?

Why Are Hybrid Cars Not Holding Their Value?

Can Tubeless Tires Be Repaired?

Can I switch back to a blue license plate after changing from a blue to a green one in Beijing?