What Causes the Squeaking Noise When the Car Bounces?

Does the Civic have heated mirrors?

Some models of the Civic have the heated mirror function, while others do not. The heated mirror function refers to the ability of the mirrors to be heated via electric heating wires embedded behind the mirror surface when driving in rainy, snowy, or foggy weather, ensuring clear visibility on the mirror surface. Below are the relevant details: 1. The heated mirror switch button for the Civic is located next to the air conditioning control buttons. The heated mirror button icon looks similar to the front windshield defogger, but upon closer inspection, there is a clear distinction. Three curved upward arrows paired with an irregular shape represent the front windshield defroster, while three curved upward arrows paired with a rectangle represent the heated mirror button. 2. In rainy or snowy weather, when the heated mirror switch is pressed, the indicator light on the button will illuminate, and the heating element will quickly heat up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. Warm air will emerge from both side mirrors, and the water droplets on the mirror surface will gradually evaporate and shrink due to the rising temperature, while the fog will slowly disappear, thereby achieving the effect of heating the mirror and removing fog and frost. If the rainfall is particularly heavy, the effectiveness may decrease and the effect may not be very noticeable. 3. The heated mirrors consume a significant amount of electricity, so it is important to ensure the vehicle is in the running state before using the heated mirrors. It is best not to use this function when the engine is not running. Additionally, the heated mirrors should be used sparingly, and each use should not exceed 30 minutes, as prolonged use may affect the lifespan and clarity of the mirrors.

8

0

Share

What is the maximum speed limit for making a U-turn?

The maximum speed for making a U-turn should not exceed 30 kilometers per hour. When making a U-turn, you should turn on the left turn signal in advance and must not obstruct other vehicles and pedestrians traveling normally. Circumstances under which U-turns are allowed are as follows: Presence of U-turn traffic lights or signs: When there is a U-turn traffic light at an intersection, a U-turn can be made when the U-turn indicator is green. If there is a U-turn sign at the intersection or a U-turn indicator on the lane, a U-turn can be made while ensuring the safety of yourself and others. No U-turn signs but left turns are allowed (no prohibition of U-turn signs are set): At intersections where left turns are allowed and no signs or markings prohibit U-turns, vehicles can make a U-turn. It should be noted that the vehicle must proceed according to the left turn signal without affecting the normal travel of other vehicles. If making a U-turn at an intersection with a left turn waiting area, you can first enter the left turn waiting area when the straight signal is green and wait until the left turn signal turns green to make the U-turn. U-turns are allowed at dashed lines: U-turns are permitted at both white and yellow dashed lines. For double yellow lines (one solid and one dashed), check if your side is the dashed line. If it is, you can make a U-turn safely; if it's solid, you cannot. If encountering double yellow lines at an intersection, you can make a U-turn on the dashed side but must not cross the stop line ahead. U-turns are allowed at yellow grid lines: Parking is prohibited in yellow grid line areas, but as long as there is no central barrier, you can make a U-turn here after yielding to normally traveling vehicles. U-turns are allowed on the dashed side of a green belt: When the front of the green belt is a dashed line, vehicles on that side can make a U-turn from there. When the front of the green belt is a solid line, vehicles must follow the traffic signal, cross the zebra crossing before making a U-turn, and are prohibited from making a U-turn over the solid line or zebra crossing.

7

1

Share

What engine does the BYD Song New Energy use?

BYD Song New Energy is a plug-in hybrid vehicle, and this model is equipped with a 1.5-liter turbocharged engine across the entire lineup. Below are the relevant details: 1. The 1.5-liter turbocharged engine in the BYD Song New Energy has a maximum power of 113 kW, a maximum torque of 240 Nm, a maximum power speed of 5200 rpm, and a maximum torque speed ranging from 1750 to 3500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The total power of the electric motor paired with this engine is 220 kW, with a total torque of 500 Nm, making it a dual-motor model. 2. The front motor of the BYD Song New Energy has a maximum power of 110 kW and a maximum torque of 250 Nm, while the rear motor also has a maximum power of 110 kW and a maximum torque of 250 Nm. The BYD Song New Energy uses a ternary lithium battery, which is commonly found in most pure electric vehicles and plug-in hybrid vehicles. Ternary lithium batteries have higher energy density and are lighter in weight.

18

5

Share

How to Pull Out a Dent in a Car?

Methods to pull out a dent in a car: Before pulling, apply hot water to the area, then place a suction cup over the dent. Use a machine to extract the air inside the suction cup to enhance suction power, then pull outward with force. If the dent cannot be pulled out, professional metal sheet repair is required. A technician will first repair the dent, then sand the paint surface, apply putty, sand the putty, and finally repaint. It is recommended that car owners opt for professional metal sheet repair or repainting at certified institutions or directly at 4S shops. Some small shops use low-quality putty, and their painters may lack expertise, which can lead to putty cracking over time. This may cause the car's paint to peel off and metal parts to rust.

6

0

Share

What is the problem when the car handbrake indicator light stays on?

The car handbrake indicator light staying on may be due to forgetting to release the handbrake or the handbrake not being fully disengaged, causing the handbrake light to illuminate. If the possibility of the handbrake is ruled out and the handbrake light remains on, the owner should check the brake fluid, as leakage or insufficient brake fluid could cause the handbrake light to come on. If the handbrake light stays on and is accompanied by body shaking or unusual noises when braking, it is likely due to the brake discs becoming thin or foreign objects entering the brake pads. Note that if the handbrake light stays on, the owner must take the car to a professional repair shop or 4S store as soon as possible for treatment. The braking system mainly consists of energy supply devices, control devices, transmission devices, and brakes, and its main functions are to decelerate or even stop a moving car, maintain a stable speed for a car going downhill, and keep a parked car stationary. Using a fault detector for inspection can quickly and accurately locate the fault, and then gradually find the cause.

13

4

Share

What is the method for bleeding brake air?

Bleeding brake air method: Brake pedal pressing method: The person sitting in the driver's seat pressing the brake pedal should forcefully press the brake pedal down and not release their foot. Wait until the person underneath the vehicle has finished bleeding the air, then inform the owner to release before letting go. If there is a significant amount of air in the brake system causing the brake pedal to feel soft, adopt a rapid press-and-release method (similar to pumping air with a bicycle pump). Then, firmly hold the brake pedal down while the person underneath the vehicle begins to bleed the air. Bleeding method: The person underneath the vehicle should wait until the person pressing the brake pedal has firmly pressed it down, then use a wrench to loosen the bleeder valve on the brake caliper to release air. After tightening the bleeder valve, instruct the person pressing the brake pedal to lift their foot and press the pedal again. Repeat this process until the brake fluid coming out of the bleeder valve is free of air bubbles.

15

3

Share

What Causes the Squeaking Noise When the Car Bounces?

Does the Civic have heated mirrors?

What is the maximum speed limit for making a U-turn?

What engine does the BYD Song New Energy use?

How to Pull Out a Dent in a Car?

What is the problem when the car handbrake indicator light stays on?

What is the method for bleeding brake air?

How to reset the tire pressure warning light on the 2018 Volkswagen Magotan?

What are the disadvantages of not maintaining the car on time?

What kind of oil is suitable for Geely Emgrand?

Why does the Lavida Plus have only one reversing light on?