What Causes the Squeaking Noise When Opening BMW Doors?

1 Answers
DiMaria
07/30/25 2:16am
Introduction to the causes of squeaking noise when opening BMW doors: Aging of door seals: The edges of car doors are lined with rubber seals to prevent door deformation from forceful closing. Additionally, they effectively block rainwater and dust from entering the vehicle. If the car is left under direct sunlight for extended periods, the door seals may age prematurely, leading to wind noise and rattling sounds between the door and its frame. Therefore, it is advisable to avoid parking the car under intense sunlight for long durations. Regular cleaning of dust from the door seals can also help prevent accelerated aging. Incorrect door closing methods: Sometimes, the window glass is not fully rolled up before closing the door. Repeated instances of this can cause the window glass to become loose or the window regulator screws to loosen, resulting in unusual noises. Hence, it is important to ensure the window glass is completely rolled up before shutting the door. Moreover, maintaining cleanliness in the window glass tracks can reduce the occurrence of noise from the door regulators.
Was this review help?
5
4
Share
More Forum Discussions

What is the fuel tank capacity of the eighth-generation Civic?

The fuel tank capacity of the eighth-generation Civic is 50 liters. In addition to storing fuel, the fuel tank in the hydraulic system also plays roles in heat dissipation, separating air bubbles from the oil, and settling impurities. Try not to wait until the fuel warning light comes on before refueling. When the light comes on, it indicates that the fuel level is already below the fuel pump. If you always wait until the light comes on before refueling, it will shorten the service life of the fuel pump. The Civic adopts front-wheel drive and is equipped with a water-cooled, four-stroke, inline four-cylinder engine with a maximum power of 104 kW and a torque of 174 Nm. The front suspension is a MacPherson independent suspension, and the rear suspension is a double-wishbone independent suspension. In terms of safety, the Civic is equipped with side airbags, a visual reverse parking system, child safety seat anchors, and the ECON intelligent green assist system.
1
1
Share

What should be paid attention to when parking for a long time?

When parking for a long time, you should pay attention to: 1. Prevent metal rust: For cars that are parked for a long time, the metal surface should be kept clean, and dust, dirt, and moisture on the car should be removed in time. The parts and surfaces that are prone to rust should be coated with engine oil, grease, or wrapped with oil paper; 2. Prevent aging and deterioration of rubber products: Long-term parked vehicles should avoid direct sunlight and contact with mineral oil; 3. Check the cotton and linen products on the car frequently, air them in time, and keep them dry; 4. The fuel tank should be tightly sealed, and avoid excessive temperature. The storage time of gasoline should not be too long; 5. Check the working condition of the engine frequently, start the engine at least once a month, let it idle for 4 to 5 minutes, and check the operation of the engine.
5
2
Share

How to Reverse Park into a Parking Space in Daily Life?

Here are the steps for daily reverse parking: 1. Keep the car body about 30 centimeters away from the dotted line to facilitate reversing into the space; 2. Adjust the seat, fasten the seat belt, shift into reverse gear, and the car will start moving backward; 3. Observe the right rearview mirror, and when the left front corner of the yellow line of the parking space disappears, turn the steering wheel fully to the right; 4. Observe the left mirror, and when you see the opposite corner of the parking space, straighten the steering wheel; 5. Observe the right mirror, and when the right rear wheel enters the parking space, turn the steering wheel fully to the left. Precautions for reverse parking: 1. When driving to the starting position, ensure the car body is at an appropriate distance from the line, pressing the white line at the front right of the parking space but not exceeding it; 2. When reversing, make sure to align with the reference points and turn the steering wheel fully; 3. Once the car is in the space, ensure it is straight and the steering wheel is centered, avoiding any unnecessary turns.
4
5
Share

How often should brake shoes be replaced in drum brakes?

Drum brakes require brake shoe replacement every 30,000 to 40,000 kilometers. A drum brake system consists of rotating components, stationary components, actuating components, and positioning adjustment devices. It is composed of a brake backing plate, wheel cylinder, brake shoes, related linkages, springs, pins, and the brake drum, and is commonly used for rear wheels. The method for replacing drum brake shoes is as follows: 1. Remove the tire and tap the surface of the brake drum with a hammer; 2. Insert a flat-head screwdriver into the gap of the spring and pry upwards with force to remove the return spring; 3. Use pliers to remove the fixing bolt of the brake shoe, and the brake shoe will automatically fall off the brake assembly. Remove the brake shoe; 4. Detach the locating pin from the old brake shoe and install it on the new brake shoe.
5
5
Share

Can modified car interiors pass the annual inspection?

Modified car interiors can pass the annual inspection if they do not affect safe driving. However, if they impact safe driving, they will not pass. The annual inspection is an event every car owner will encounter, where professional staff and equipment are responsible for inspecting the vehicle. Car interiors mainly refer to the automotive products used for internal modifications. Car interiors cover various aspects of the vehicle's interior, such as steering wheel covers, seat cushions, floor mats, car perfumes, hanging accessories, interior decorations, and storage boxes—all of which are car interior products. Car interior components not only serve decorative purposes but also involve rich functionality, safety, and engineering attributes.
6
5
Share

How to Check Average Fuel Consumption?

To check the average fuel consumption, you can: 1. Directly view the data calculated by the vehicle's onboard computer, which will be displayed on the dashboard; 2. Manually calculate: The vehicle's fuel consumption equals the amount of fuel consumed divided by the distance traveled in kilometers, measured in liters per kilometer. You can fill an empty fuel tank with gasoline, observe how many kilometers it can travel, and then determine the average fuel consumption. The average fuel consumption of a vehicle refers to its fuel consumption per 100 kilometers, which is the average amount of fuel consumed when the vehicle travels 100 kilometers under normal road conditions. Instantaneous fuel consumption refers to the fuel consumption at a specific moment, typically the fuel consumption generated at a single point in time. For example, the instantaneous fuel consumption during a slow and steady acceleration start will be less than that during a rapid acceleration start.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.