What Causes the Squeaking Noise When Opening and Closing Car Doors?

1 Answers
DiKevin
07/24/25 10:20pm
The reasons for the squeaking noise when opening and closing car doors: Due to years of use, the door hinges and limiters experience wear and tear, and dust accumulates in the gaps, causing vibration interference during the door operation. Solutions for the squeaking noise when opening and closing car doors: 1. For issues caused by hinges, lubricating oil can be applied; 2. For problems caused by limiters, clean the grease and dirt from the limiter arm, limiter pin shaft, and connecting bracket surfaces, then apply an appropriate amount of lubricant to the upper and lower surfaces of the arm. If the car has been in use for a while, it's important to check whether the door seals have aged, as seals are rubber products that can gradually deteriorate and break over time, leading to noticeable wind noise and friction sounds for passengers. If the seals are aged or damaged, it is recommended to replace them directly.
Was this review help?
4
1
Share
More Forum Discussions

Can You Drive with High Beams on the Highway?

Driving on the highway with high beams is generally permissible. Highways typically have physical barriers separating opposing traffic lanes, minimizing the likelihood of oncoming vehicles. Additionally, the greater distance between vehicles makes using high beams relatively safe. Moreover, certain highway sections lack lighting infrastructure, where the bright illumination from high beams significantly enhances forward visibility. Relevant information about vehicle lights is as follows: Introduction: Vehicle lights refer to the lighting fixtures on automobiles, serving as illumination tools for nighttime road travel and signaling devices for various driving maneuvers. Reverse Lights: Reverse lights automatically activate when the driver engages reverse gear. These white-transparent lamps primarily function as warnings to indicate the vehicle is reversing.
20
3
Share

What is the Bluetooth PIN code for Land Rover?

The Bluetooth PIN code for Land Rover is 0000 or 8888. Below is relevant information: 1. Car Bluetooth PIN code: The car Bluetooth PIN code is required for clearing fault codes, matching performance after replacing important components, and car key matching. It serves as the vehicle's production identification code, ensuring the vehicle's security. 2. Land Rover: Land Rover is a British brand specializing in all-terrain vehicles and sport utility vehicles, under Jaguar Land Rover. Its current lineup includes the Range Rover series, Discovery series, and Defender series. Introduced in 1948, Land Rover is a pioneer in civilian all-terrain special vehicles.
7
2
Share

What Kind of Driver's License is Required for Trucks?

Light and mini automatic transmission trucks require a C1 driver's license, heavy and medium trucks require a B2 driver's license, and heavy and medium full trailers and semi-trailer combinations require an A2 driver's license. An A2 license allows driving vehicles permitted under B1, B2, C1, C2, C3, C4, and M licenses. Types of driver's licenses and permitted vehicles: 1. A1: Permitted vehicles: Large passenger vehicles. 2. A2: Permitted vehicles: Heavy and medium full trailers and semi-trailer combinations. 3. A3: Permitted vehicles: City buses with a capacity of 10 or more passengers. 4. B1: Permitted vehicles: Medium passenger vehicles (including city buses with a capacity of 10 to 19 passengers). 5. B2: Permitted vehicles: Heavy and medium trucks; heavy and medium special purpose vehicles.
11
0
Share

What suspension does the Aston Martin DBS use?

Aston Martin DBS uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The DBS is a sports car produced by Aston Martin, designed for the ultimate driving experience, balancing both road and track performance. In terms of power, the Aston Martin DBS is equipped with a 5.2T twin-turbocharged engine (model AE31), paired with an 8-speed automatic manual transmission. Regarding body dimensions, the car measures 4712mm in length, 1968mm in width, and 1280mm in height, with a wheelbase of 2805mm, and features a front-engine, rear-wheel-drive layout.
2
0
Share

How to Thread Cables Through an Internal Routing Frame?

First, pass the shift cable core through the round traction head. Connect the soft wire connector to the round traction head and tighten it. After securing the guide wire, insert it into the frame hole pin. Use the strong magnet on the pen cap to attract the guide wire head and guide it to the frame's cable exit hole. Once guided to the frame's cable exit, use a magnetic hose to pull out the cable. After removing the cable core, secure and tighten the frame hole pin cover. Then, thread the cable core into the rear derailleur cable slot, tighten it, and adjust the rear derailleur position accordingly.
11
1
Share

Where is the battery located in the Wuling Zhiguang?

The battery of the Wuling Zhiguang is located under the front passenger seat. You can see it after lifting the passenger seat. The battery is a crucial component in a vehicle and also a wearable part that requires regular replacement. When the engine is not running, the battery supplies power to all electronic devices in the car and is responsible for starting the engine. After the engine starts, the alternator takes over to power the vehicle's electronic systems and simultaneously charges the battery. The Wuling Zhiguang is a microvan produced by SAIC-GM-Wuling, featuring a MacPherson strut front suspension and longitudinal leaf spring rear suspension. Its body dimensions are 3797mm in length, 1510mm in width, and 1820mm in height, with a wheelbase of 2500mm.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.