···
Log in / Register

What Causes the Squeaking Noise in the Rear Door of a Mercedes-Benz?

3 Answers
Cathy
09/03/25 5:49am
Mercedes-Benz rear door squeaking noise may be caused by stiff hinges, aging seals, etc. Specific causes and solutions are as follows: Stiff hinges: Everyone operates with different force and amplitude, leading to significant wear on the door hinges. Over time, this can result in the door not closing tightly, causing squeaking noises. Solution: Keep the door hinges lubricated to reduce wear and prevent rust. Aging seals: There is a rubber seal around the door to prevent wind and rain from entering the cabin. Once the seal ages and becomes damaged, it can cause cabin leakage, increasing wind noise and other squeaking sounds while driving. Solution: Replace the seal.
Was this review help?
15
3
Share
LeRose
09/15/25 7:20am
I've been running an auto repair shop for over a decade and have encountered many cases of Mercedes rear door squeaks. The most common issue is lack of lubrication in door hinges - after frequent opening/closing they'll start creaking, which can be fixed by applying grease. Another frequent cause is hardened/deteriorated door seals rubbing against the body, especially noticeable in cold weather - rubber conditioner can help. Loose trim panel clips are also common, like when reassembly isn't done properly causing rattles over bumps. Worn door lock mechanisms produce clicking sounds, and sticky child locks can also make noise. Try lubricating hinges and seals first; if noises persist, remove door panels to inspect internal components. Gently closing doors helps prolong part lifespan.
Was this review help?
8
3
Share
Expand All
LeJaxon
10/29/25 7:57am
My Mercedes-Benz C-Class rear door also had strange noises. At first, there was a rustling sound on uneven roads. I checked myself and found coins vibrating in the door storage compartment—emptying it eliminated the noise. Later, a squeaking sound appeared when going over speed bumps. A friend suggested it was a seal issue, and applying Vaseline improved it. However, after a few months, the noise worsened. At the dealership, they found the window regulator bracket bolts inside the door panel were loose. The mechanic said it could be due to bumps loosening the screws or water ingress from car washes causing rust. Now, I regularly lubricate the door hinges and ask the technician to check the seal condition during every service. I recommend noting when the noise occurs and its characteristics to help identify the cause faster.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

How to Turn on the Air Conditioning Cooling in Buick GL8?

First, you need to press the brake pedal and turn the key to the ST position until the idle speed stabilizes. Turn the fan speed knob to the far right for maximum airflow. Turn on the compressor. Press the recirculation button to activate the interior recirculation mode. Click the fan blade icon on the air conditioning panel to adjust the airflow direction.
12
2
Share

How to Replace the Headliner of an 8th Generation Accord?

First, remove components such as the sun visors, dome light, and handles. After removal, thoroughly clean the headliner, organize all wiring, recline the front seats, and pull the headliner out from the rear door. At this stage, be very careful not to cut too much, as any excess trimming will make the exposed part of the headliner look unattractive. Once the adhesive has firmly set, reinstall all the removed components.
9
5
Share

How to Adjust the Front and Rear Position of GL8 Seats?

Move the seat position switch forward or backward to adjust the seat's front and rear position. Lift up or press down to raise or lower the seat. Simply press the lumbar support adjustment button to adjust the height of the lumbar support. The seat's lumbar wrapping can be adjusted to prevent excessive driver displacement during aggressive driving. The operation method is the same as the front and rear seat control buttons—just push forward or backward to adjust.
1
2
Share

How to Replace the Cabin Air Filter on a Baojun 730?

To replace the cabin air filter, first open the glove box cover. Remove the fixing clips of the glove box cover to detach it. After removing the glove box, you will see the cabin air filter cover. Press the fixing clips on both sides of the cover firmly to remove it. Pull out the old cabin air filter outward. Install the new cabin air filter and reassemble everything in reverse order of disassembly.
19
0
Share

What is the recovery method for the one-touch window lift failure in the Octavia?

To prevent damage caused by overheating of the window lift motor, the window lifting function may be temporarily disabled for a few seconds. Wait for the function to recover before operating again. If the issue is not due to the above reason, the window regulator failure in the Volkswagen Lavida is generally caused by a damaged regulator, which requires replacement. Abnormalities in the door control module, malfunction of the window regulator control button, or insufficient battery power may also cause the issue. Try disconnecting and then reconnecting the car battery.
5
5
Share

How to Activate One-Touch Power Window in CRV?

The one-touch power window button for Honda CRV is located on the driver's door armrest. First, start the vehicle. Press and hold the switch to lower the window completely for 5 seconds without releasing. Then press and hold the switch to raise the window fully for 5 seconds before releasing. After completing these steps, the feature will be activated. The first button position is the same as a regular power window. The second position allows one-touch operation by pressing and releasing the button once. With regular power windows, you need to hold the switch until the window reaches the desired position before releasing.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.