What causes the squeaking noise in the Mercedes-Benz GLC suspension?

Is the fuel consumption of the Mitsubishi ASX 1.6L manual version high?

The fuel consumption of the Mitsubishi ASX 1.6L manual version is not high, with a fuel consumption of 6.3L/100KM. Below is a related introduction to the Mitsubishi ASX: 1. The length, width, and height of the Mitsubishi ASX are 4375/1770/1615mm, with a wheelbase of 2670mm. 2. It is equipped with a 1.6L/2.0L naturally aspirated engine, with a maximum horsepower of 124hp/167hp and a peak torque of 149Nm/197Nm. 3. Transmission: 5-speed manual transmission/CVT continuously variable transmission (simulating 6 gears).

9

1

Share

How to Use the One-Touch Window Roll-Up Function?

Here are the specific methods for using the one-touch window roll-up function: 1. For regular power windows, you need to hold down the switch, and release the button when the window reaches the desired position, stopping the movement. 2. Cars equipped with one-touch window control have a two-stage switch. The first stage operates like a regular power window. The second stage only requires a single press and release, and the window will automatically open or close completely. Generally, mid-to-high-end models come with the one-touch window function to prevent drivers from being distracted by operating the windows, thereby improving safety. 3. Rear window lock switch: When this switch is pressed, it disables the adjustment switches for the left and right rear windows as well as the passenger-side window. Only the switch on the driver's door can then be used to adjust the windows.

15

4

Share

What Causes Low Engine Coolant Temperature in Cars?

Low engine coolant temperature is generally caused by a faulty thermostat or a constantly running cooling fan. The hazards of low engine coolant temperature are as follows: 1. When the engine temperature is low, the viscosity of the lubricating oil increases, leading to poor local lubrication, which accelerates wear on components and also increases engine power consumption. 2. Water vapor in the combustion byproducts condenses into water and combines with acidic gases to form acids, intensifying corrosion on the engine block and parts. 3. Unvaporized fuel due to low temperature washes away the oil film on friction surfaces (cylinder walls, pistons, piston rings, etc.) and dilutes the engine oil, increasing component wear and accelerating the degradation of oil performance.

3

0

Share

Why is there a sound coming from the chassis after the car is turned off?

Here are the reasons for abnormal noises from the chassis after the car is turned off: 1. Cooling sound of the three-way catalytic converter: The normal operating temperature of the three-way catalytic converter is 400-800°C. After the engine is turned off, its operation gradually stops, and the temperature drops. The metal components inside undergo thermal expansion and contraction, resulting in abnormal noises. 2. Cooling sound of the exhaust pipe: When the car is idling cold, the exhaust pipe temperature is high. Under high load or when there is a mixture burning in the exhaust pipe, the temperature is even higher, causing the exhaust pipe to expand and contract thermally, producing abnormal noises. In many cases, this sound originates from the front end of the exhaust pipe and the flexible joint. 3. Cooling sound of the turbocharger: Under normal conditions, the exhaust gas temperature can reach 600-700°C, accelerating the friction-generated heat from the rapidly spinning turbocharger. After the engine is turned off, the thermal expansion and contraction are quite noticeable, leading to abnormal noises.

19

3

Share

What are the reasons why the car's tachometer fails to rise at high speeds?

Specific reasons why the engine speed fails to rise at high speeds: 1. Fuel injector malfunction, uneven fuel injection causing an imbalance in power output among cylinders. This can be due to clogged injectors, poor sealing, or fuel spraying in a linear pattern. 2. Incorrect fuel injection quantity, caused by sensor or wiring faults, leading the control unit to issue incorrect commands. This results in either too rich or too lean a fuel mixture, indirectly causing unstable idling. 3. Oxygen sensor failure, including open circuits, short circuits, or grounding faults in the sensor wiring, or poor contact in the engine control unit plug due to water ingress or internal faults.

7

0

Share

How to Adjust the Clutch Height?

Clutch height adjustment mainly involves the clutch control components. For mechanical clutches, the height can be adjusted by modifying the tension of the clutch cable; hydraulic clutches do not allow height adjustment. Additional information about clutches is as follows: 1. The clutch is the component in the automotive transmission system that directly connects to the engine. It enables smooth engagement or temporary disconnection of engine power to the transmission, reliably transferring engine torque to facilitate driver operations such as starting, stopping, and gear shifting. 2. Based on different control methods, clutches can be categorized into mechanical clutches and hydraulic clutches. A mechanical clutch operates primarily through the clutch cable connected to the clutch pedal when the pedal is depressed.

16

1

Share

What causes the squeaking noise in the Mercedes-Benz GLC suspension?

Is the fuel consumption of the Mitsubishi ASX 1.6L manual version high?

How to Use the One-Touch Window Roll-Up Function?

What Causes Low Engine Coolant Temperature in Cars?

Why is there a sound coming from the chassis after the car is turned off?

What are the reasons why the car's tachometer fails to rise at high speeds?

How to Adjust the Clutch Height?

Does Snow Affect Car Paint?

What happens when using the service brake continuously on a long slope?

Do You Need to Press AC When Turning on the Car Heater?

Is it better to use internal or external air circulation when driving in winter?