What Causes the Squeaking and Friction Noise in the Steering Wheel of a New Car?

1 Answers
Caden
07/24/25 11:19pm
The reasons for the squeaking and friction noise in the steering wheel of a new car are: 1. Friction between plastic components; 2. The clock spring in the steering wheel; 3. Noise from the stabilizer bar. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, and airplanes. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and transmit it to the steering shaft. Precautions for using the steering wheel: 1. Do not place your hands too close together on the steering wheel; 2. The amplitude and speed of steering wheel rotation should match the turning angle of the car and the vehicle's speed; 3. When the car is stationary, avoid turning the steering wheel to prevent damage to the steering system and tire wear; 4. On different roads, the grip strength on the steering wheel should vary—hold it firmly but not too tightly. When adjusting direction, use gentle force, make small and quick adjustments.
Was this review help?
14
2
Share
More Forum Discussions

Is the left side narrow when reversing into the left parking space due to turning too early or too late?

Left side being wide when reversing into the left parking space is caused by turning the steering wheel too early. If you turn the steering wheel too early, i.e., turning it fully to the left before the lower edge of the rearview mirror aligns with the stop line, it can easily cause the left rear wheel to press against the left corner of the parking space. When you start reversing with the steering wheel turned fully to the left, you need to observe the distance between the rear wheel and the corner of the parking space in the left rearview mirror. If this distance is less than 30cm, you need to adjust the steering wheel slightly to increase the distance. If you keep the steering wheel turned fully to the left, you will press against the corner line of the parking space. Additional information: 1. The evaluation criteria for reversing into a parking space are: failing to follow the prescribed route or sequence, resulting in disqualification. The vehicle body pressing against the line or failing to reverse into the space, resulting in disqualification. 2. Failing to complete reversing into the parking space within 210 seconds, resulting in disqualification. Stopping midway deducts 5 points each time.
9
5
Share

Where is the water temperature gauge on the Honda Lingpai?

The Honda Lingpai does not have a water temperature gauge, only a water temperature warning light. When the blue light is on, it indicates that the water temperature is too low, and the car needs to be warmed up. When the red light is on, it means the engine water temperature is too high, and the car should be stopped to avoid engine damage. Below is relevant information: 1. Low-temperature zone: If the LED in the lower part of the dial lights up, it indicates the engine is in a low-temperature state. 2. Normal zone: If the LED lights up to the middle of the dial, it means the engine has reached the working temperature. Additional information: Solutions for excessively high water temperature include: 1. Insufficient coolant in the cooling system causing the engine to overheat—stop the car, wait for the engine to cool, and add coolant. 2. Loose or broken water pump or fan belt causing the engine to overheat—visit a repair shop to replace the relevant parts. 3. Blocked radiator grille or core ventilation ducts due to debris, leading to poor cooling and engine overheating—clean the radiator grille or remove the debris. 4. Insufficient engine oil or substandard oil quality causing high temperatures—simply replace with high-quality oil.
5
4
Share

How to Replace the High Beam Bulb on a Lavida?

Lavida high beam bulb replacement method is: 1. After the vehicle is turned off, wait for the engine to cool down completely before opening the engine hood; 2. Locate and remove the high beam dust cover; 3. Unplug the wiring harness connector on the bulb base inside the headlight assembly; 4. Pinch the steel wire clip next to the base, and once the clip loosens, the bulb can be directly removed and replaced with a new one. The Lavida is a compact 4-door 5-seater sedan with body dimensions of: length 4670mm, width 1806mm, height 1474mm, and a wheelbase of 2688mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm.
15
5
Share

Can a Car Battery Charge Itself?

Car batteries can charge themselves directly while the vehicle is running. During engine startup, the starter motor draws a very high current that a regular charger cannot supply. If the battery is completely drained, the car won't start. Below are specific classifications of car batteries (also called accumulators): 1. Conventional Lead-Acid Battery: The plates are made of lead and lead oxide, with sulfuric acid solution as the electrolyte. Main advantages include stable voltage and low cost; disadvantages are low energy density (electric energy stored per kilogram), short service life, and frequent maintenance. 2. Dry-Charged Battery: Fully named dry-charged lead-acid battery, its key feature is the negative plate's high electricity storage capacity. In completely dry conditions, it can preserve stored power for two years. When needed, simply add electrolyte and wait 20-30 minutes for use. 3. Maintenance-Free Battery: Due to structural advantages, these batteries consume minimal electrolyte, essentially requiring no distilled water replenishment during their lifespan. They also feature shock resistance, high-temperature tolerance, compact size, and low self-discharge. Their service life is typically twice that of conventional batteries.
18
3
Share

How to accurately align 30 cm from the side line during uphill parking?

At the bottom of the slope, first straighten the vehicle, then gently release the clutch to start moving uphill. You can use the tip of the first wiper blade on the right side as a reference point, aligning it with the solid line on the right side of the slope as you proceed.
2
0
Share

How to Upgrade the In-Car Multimedia System?

To upgrade, you must visit a specialized 4S shop for system and map updates. During the upgrade process, the central control interface will display a 'Connecting for Upgrade' message. Do not disconnect the power supply. Upgrades can also be performed via simple USB transfer. However, it's important to note that some vehicle models require a dedicated USB cable for the host unit, as not all models are universally compatible.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.