···
Log in / Register

What Causes the Sound When Car Wipers Scrape the Windshield?

4 Answers
JuliaDella
07/29/25 7:38pm

Reasons for the sound when car wipers scrape the windshield: 1. Aging of the wiper causes the rubber part to wear or fall off, resulting in abnormal noise due to friction during the wiping process. This is a normal phenomenon, and it can be resolved by timely replacement; 2. If there is no water on the windshield during wiper use, leading to insufficient lubrication, abnormal noise may occur; 3. The presence of hard impurities such as sand or stones on the windshield can also cause abnormal noise due to friction during wiper operation. Larger impurities on the windshield need to be cleaned off; 4. Damage to the wiper linkage mechanism. In this case, it is necessary to visit a repair shop for professional repair or directly replace the wiper with a new one.

Was this review help?
4
3
Share
GrahamDella
08/14/25 2:49pm

After driving for so many years, I often encounter situations where the wipers squeak when wiping the windshield. The most common reason is that the wiper blades have aged and worn out, with the rubber strips becoming hard or cracked, causing excessive noise when rubbing against the glass. Additionally, if the windshield surface is dirty—such as with accumulated bug residue or oil film—the wipers will sound like they're grinding when in use. I remember once after rain, I checked and found that the wiper arm pressure was incorrect, causing uneven wiping and strange noises. Whenever this happens, I always recommend first testing with old wiper blades or cleaning the windshield with white vinegar. If the noise persists, it's time to replace the wiper blades—it saves money and improves driving safety. Don’t let this noise affect your visibility in the rain.

Was this review help?
8
5
Share
Expand All
DelStephanie
10/15/25 6:24am

As a young car owner, I'm very mindful of daily expenses, so when my wipers start making noise, I first check for wiper blade wear and windshield cleanliness to avoid impulsively replacing them at the first sign of trouble. Try cleaning the glass with alcohol to remove grease or adjusting the wiper arm pressure settings—this often solves the problem. I've also noticed that in dry or windy conditions, dust can make the rubber blades rough, causing noise. A regular spray of wiper fluid for lubrication helps maintain quiet and safe operation without frequent costly maintenance.

Was this review help?
14
0
Share
Expand All
RiverLynn
11/28/25 7:16am

As an experienced driver who has driven many cars, wiper noise is mostly caused by aging rubber blades or dirty windshields, especially during dry seasons. Simply check if the wiper blades have hardened and the balance of the wiper arms to easily eliminate that screeching sound.

Was this review help?
7
5
Share
Expand All
More Forum Discussions

Where is the fuel tank cap button on the Audi A6?

Audi A6 fuel tank cap button is located at the lower part of the driver's door, on the left side of the legroom, next to the front engine compartment switch. Taking the 2004 Audi A6 as an example, its body dimensions are: length 4886mm, width 1810mm, height 1475mm, wheelbase 2850mm, minimum ground clearance 115mm, fuel tank capacity 70L, and the body structure is a 4-door 5-seater sedan. The 2004 Audi A6 is equipped with a 2.8L naturally aspirated engine, with a maximum power of 142kW and a maximum torque of 280Nm, paired with a CVT continuously variable transmission.
15
0
Share

Where is the car fuel pump installed?

Car fuel pumps are installed inside the fuel tank. The function of the fuel pump is to draw gasoline from the fuel tank and deliver it through pipelines and fuel filters to the float chamber of the carburetor. It is precisely because of the fuel pump that the fuel tank can be installed at the rear of the car, far from the engine and below the engine level. Fuel pumps can be divided into two types based on their driving methods: mechanically driven diaphragm type and electrically driven type. The car fuel pump is one of the fundamental components of the fuel injection system in electronic fuel injection vehicles. It operates during engine startup and while the engine is running. If the engine stops but the ignition switch remains in the ON position, the HFMSFI control module will cut off the power supply to the fuel pump to prevent accidental ignition.
5
1
Share

What does the SVS on the car dashboard represent?

The SVS on the car dashboard indicates that the engine control unit has detected an error signal from a certain sensor or that it has exceeded the usage standard. The reasons for the light to come on are: 1. Fault in the fuel emission system; 2. Poor fuel quality; 3. Engine carbon buildup; 4. Spark plug carbon buildup; 5. Sensor fault; 6. Fault in the three-way catalytic converter; 7. Intake tract fault; 8. Engine knocking. The solutions for the SVS indicator light on the car dashboard are: 1. Replace the oxygen sensor; 2. Check if the oxygen sensor plug is loose; 3. Replace the three-way catalytic converter; 4. Clean the spark plugs; 5. Drain the old gasoline from the fuel tank and replace it with high-quality gasoline; 6. Clean the engine.
11
3
Share

What are the reasons for the high fuel consumption of the Qashqai?

The reasons for the high fuel consumption of the Qashqai are: 1. Excessive carbon deposits in the engine; 2. Damaged oxygen sensor; 3. Dirty oil filter, air filter, and fuel filter. The Qashqai is a compact car under Dongfeng Nissan, equipped with a 2.0L naturally aspirated engine. The engine has a maximum horsepower of 151 hp and a maximum torque of 194 Nm, paired with a CVT transmission. The dimensions of the Qashqai are 4401mm in length, 1837mm in width, and 1593mm in height, with a wheelbase of 2646mm. Its top speed is 186 km/h, and the trunk capacity is 486L.
1
3
Share

What is the displacement of the Changan CX20?

The Changan CX20 has two displacement options: 1.3L and 1.4L. The vehicle is equipped with two engines: a 1.3L naturally aspirated engine and a 1.4L naturally aspirated engine. The 1.3L engine delivers a maximum power of 63kW and a maximum torque of 110Nm, while the 1.4L engine produces a maximum power of 74kW and a maximum torque of 131Nm. The Changan CX20 is a compact car under the Changan brand, with dimensions of 3970mm in length, 1730mm in width, and 1615mm in height, and a wheelbase of 2450mm. It features a MacPherson independent front suspension and a trailing arm rear suspension, with a front-wheel-drive layout.
6
4
Share

What Maintenance Should Be Done for a New Car at 30,000 Kilometers?

The maintenance that should be done for a new car at 30,000 kilometers includes: 1. Changing the engine oil and the three filters; 2. Cleaning the throttle body and fuel system; 3. Replacing the coolant and brake fluid; 4. Checking the vehicle's safety condition. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car. Its purposes are: 1. To keep the car clean and tidy; 2. To maintain the vehicle's technical condition in normal state; 3. To eliminate hidden dangers and prevent faults; 4. To slow down the deterioration process of parts; 5. To extend the service life. Precautions for car maintenance include: 1. Avoid running the engine for a long time in an unventilated garage; 2. Avoid sucking the oil pipe with your mouth; 3. Avoid getting carburetor cleaner on the car body.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.