What Causes the Sound of Water When Accelerating?

2 Answers
LeBlakely
07/29/25 5:13am
The sound of water when accelerating can be caused by water remaining in the pipes of the air conditioning system's heater core or residual water accumulation in the car. Water in the air conditioning system: The warm air from the heater comes from the circulation of the engine coolant. The pipes in this area are positioned relatively high, and after replacing the coolant, some air may remain trapped, which over time can form a certain amount of water accumulation. When cold water flows through the heater core, the driver may hear a water sound when accelerating. Residual water in the car: A loose or damaged exhaust pipe can lead to water accumulation inside the car. It is recommended to check if the water level in the car's radiator has decreased. If it has, the air inside the radiator should be purged to eliminate this water sound. Engine knocking: If the car makes a water sound when accelerating deeply, it may be due to engine knocking causing noise from the valves. It is advisable to check the cause of the knocking and add some anti-knock agents. Additionally, pay attention to the fuel grade when refueling. Avoid mixing fuels and do not use gasoline with a grade that does not match the car's recommended fuel grade. This can also help prevent the sound of water when accelerating.
Was this review help?
10
0
Share
DeTheo
08/12/25 8:50am
I've been driving my old car for ten years, and last year I encountered a situation where I could hear water sounds whenever I stepped on the gas. At first, I thought it was just a minor issue of water splashing from the tires, but upon closer listening, the sound seemed to be coming from the engine side. A friend who works in auto repair told me it might be a leak in the coolant system's water pump, causing a gurgling sound as the coolant flows. Alternatively, water might have accumulated inside the exhaust pipe, making a splashing noise when accelerating due to pressure changes. In my case, I checked it myself and found the coolant reservoir's level was a bit low. After adding some fresh coolant, the sound reduced. I suggest you pop the hood before starting the car next time to check if the coolant level is normal and the color hasn't changed. If the noise persists, you should head to a repair shop quickly to avoid costly repairs or dangerous situations.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

What does B10 life of a vehicle mean?

B10 life is defined as the operating time point of a product. After the product reaches this time point, it is estimated that 10% of the products will experience failures. Engine life: For automotive products, B10 is generally used to indicate the reliability of a vehicle. Initially, B10 was applied to bearings, where 'B' stands for the first letter of 'Bearing', and '10' represents ten percent. An engine's B10 life reaching 1 million km is specific to that particular engine and does not have a concrete standard. This means that 90% of such engines can operate up to 1 million km. Purpose of B10 life: B10 life was originally used to describe the reliability and lifespan of bearings. Through long-term usage, it was observed that the reliability of bearing products gradually declines over time. For example, if a batch of 100 bearings starts operating simultaneously, after prolonged operation, the bearings will enter a period of high failure rates. Beyond a certain time point, almost all of these 100 bearings will begin to fail.
15
3
Share

What brand are the tires on the Haval H4?

The tires on the Haval H4 are from the Goodyear EfficientGrip SUV series. The Haval H4 tire specifications are 225/60R18, with 18-inch rims. Additionally, for consumers seeking higher performance, there is an optional 19-inch rim available, with tire specifications of 225/55R19 for the 19-inch rims. The Haval H4 is a compact SUV under the Haval brand. In terms of body dimensions, the Haval H4 measures 4410mm in length, 1845mm in width, and 1695mm in height, with a wheelbase of 2660mm. Exterior-wise, the Haval H4 features a dual waistline design with a lower front and higher rear, giving it an elegant stance. Paired with 18-inch five-spoke two-tone sport rims, it adds a touch of dynamism. The rear adopts a new bumper design, with the exhaust pipe optimized to a dual exposed barrel-style configuration, enhancing its sporty appeal.
9
0
Share

Why Do Some Sedans Have Yellow License Plates?

The reasons why some sedans have yellow license plates include exceeding length limits, meeting weight requirements for yellow plates, or being classified as special vehicles. The specific reasons are as follows: Exceeding Length Limits: If the vehicle's body length exceeds 6 meters, it requires a yellow license plate. A sedan with a yellow plate indicates that its body length is too long to meet the blue plate standards for sedans, thus necessitating a yellow plate. Meeting Weight Requirements for Yellow Plates: Vehicles with a total mass of 4.5 tons (inclusive) or more, or those designed to carry 20 passengers (inclusive) or more, must display yellow license plates. Special Vehicles: Sedans used by driving schools, taxis, and other commercial vehicles are required to have yellow license plates. Additionally, yellow-plated vehicles need an operating permit and must undergo quarterly inspections. Furthermore, yellow-plated vehicles require a special permit to drive in urban areas.
3
2
Share

What is the emission standard for the 2019 Sylphy Classic?

The 2019 Sylphy Classic Luxury Edition comes with two emission standards: China V and China VI. Here are the details about the Sylphy Classic Luxury Edition: 1. Exterior: The front design of the 2019 Sylphy Classic resembles the Teana, featuring a U-shaped chrome trim and boomerang-style headlights as the latest design elements. The rear design is simple yet timeless, with large taillights and a robust rear bumper giving it a full and substantial look. 2. Features: The layout of the functional areas on the dashboard of the 2019 Sylphy Classic is logical and user-friendly. The central touchscreen is a 7-inch display with basic button controls, integrating CarPlay functionality, Bluetooth calling, and multimedia systems, among others. The newly added Intelligent Connect Edition is equipped with Dongfeng Nissan's self-developed 'Intelligent Connect+' system, which includes intelligent voice control, full-time navigation, remote real-time monitoring, 24/7 entertainment, in-car Wi-Fi hotspot, and worry-free data usage.
15
4
Share

What is the Three Touches in Subject 3?

The "Three Touches" in the Subject 3 driving test refer to: touching the sensor of the center rearview mirror, the sensor of the left rearview mirror, and the sensor under the seat, while adjusting the seat properly. Below are some tips for the Subject 3 test: 1. Follow the instructions: Listen carefully to the voice prompts during the Subject 3 test and follow them accordingly. Remember not to perform any actions before the voice prompt ends; always wait until the prompt is complete before proceeding. 2. Pay attention to special zones: In many areas, the voice prompts no longer remind candidates of special zones such as school areas, bus stops, and crosswalks. However, candidates must perform corresponding deceleration or yielding actions based on the project signs and road markings. For school zones, apply the brakes within 10 meters of the sign, keeping the speed below 30 km/h. For bus stops, apply the brakes within 10 meters of the sign, keeping the speed below 30 km/h. For crosswalks, apply the brakes to decelerate within 30 meters before the crossing, and stop to yield if pedestrians are passing.
8
1
Share

Where is the windshield washer fluid filler port on the Geely Binyue?

The location for adding windshield washer fluid to the Geely Binyue is in the lower left corner of the engine compartment. The steps for adding windshield washer fluid are as follows: 1. Type of washer fluid: In northern regions, choose an antifreeze-type washer fluid to prevent the pipes from freezing and cracking due to low winter temperatures. In southern regions, a washer fluid with added insect repellent components is sufficient. 2. Diluting the washer fluid: Generally, purchased washer fluid needs to be diluted before use. Follow the instructions on the manual for dilution. The car's washer fluid capacity is approximately 1.5L, so use a 1.25L or 1.5L container for dilution. 3. Adding the washer fluid: On the left side of the engine compartment, there is a water tank with a front windshield spray symbol on the cap, which is the washer fluid container. Open it and pour in the diluted antifreeze washer fluid, but do not fill it too full—just enough to see the water surface slightly. Remember not to exceed the MAX mark.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.