What Causes the Sound of Rubber Scraping the Ground from Tires?

2 Answers
HoldenDella
07/25/25 4:11pm
The reasons for tires making a rubber scraping sound are as follows: 1. Low-speed driving: Driving at low speeds can cause inaccurate four-wheel alignment of the vehicle. Long-distance driving causes significant tire wear, leading to uneven tire wear and abnormal noises. The noise is not obvious at low speeds but produces a uniform humming sound at high speeds. 2. Damaged wheel bearings: This phenomenon occurs when a vehicle's wheel bearing is damaged. Long-distance driving places high demands on wheel bearings. Bearings of poor quality or those that have been used for a long time may fatigue and become damaged under prolonged high-speed operation, resulting in abnormal noises. 3. High idle speed after high-speed driving: Prolonged high-speed operation of the engine causes some of the carbon deposits inside the engine to burn off due to high temperatures and be expelled with the exhaust.
Was this review help?
7
4
Share
Ellis
08/11/25 9:43pm
The other day when I slammed on the brakes, I was startled by a screeching sound from the tires like they were grinding against the road. Later, I found out that this noise often occurs when you brake hard, especially if the car doesn't have an ABS system, as the tires can lock up and skid. The intense friction between the tire rubber and the road creates the noise. If you're driving in the rain or on wet surfaces, the risk of skidding is higher, and the sound can be even louder. Additionally, tire issues can also cause this—for example, if the tire pressure is too high or too low, it changes the contact area with the road, leading to skidding noises during acceleration. Or, if you take a turn too sharply, the tires may slide sideways and produce friction sounds. What I learned is not to panic when hearing this noise; just slow down and control your speed. Regularly checking tire pressure and tread depth can help prevent it, and getting periodic inspections at a shop is a must. Drive smoothly, avoid sudden acceleration or braking, and always prioritize safety.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

How many liters of engine oil should be added to a BMW 530i?

For the BMW 530, adding 5 liters of engine oil is sufficient. The BMW 530 is equipped with a turbocharged engine. When adding engine oil, ensure that the oil level is between the min and max marks on the dipstick. Introduction: Engine oil, motor oil, or engine lubricant is a substance enhanced with additives in a base oil. Composition: It mainly contains anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. Function: Engine oil is used for lubricating internal combustion engines. The primary functions of engine oil are to reduce friction and wear on moving parts, clean sludge (one of the functions of dispersants) and varnish (detergents) from the engine. It also neutralizes acids produced from fuel and lubricant oxidation (detergents), improves piston ring sealing, and cools the engine by carrying away heat from moving parts.
15
2
Share

Where is the Passat coolant reservoir located?

The Passat coolant reservoir is located on the left side inside the engine compartment, marked by a small windshield washer fluid symbol. Specific steps: First, open the driver's door, then pull the hood release lever located on the left side near the driver's legs. Lift the hood and secure it with the support rod. Under the Passat's hood, you'll find a cap marked with a small fluid symbol - this covers the coolant reservoir. Adding coolant: The Passat's coolant reservoir typically holds antifreeze. To refill it yourself: Park the car on level ground, let the engine cool down, then open the hood to locate the reservoir. Check the antifreeze level against the markings on the side of the expansion tank. If the level is at the 'min' mark, add antifreeze immediately until it reaches the proper level. If adding coolant to a warm engine, fill it slightly above the marked line.
15
3
Share

What is the method for manually resetting the maintenance light on the Changan CS75?

The method for resetting the maintenance light on the Changan CS75 is as follows: Turn on the ignition switch, locate the settings menu on the multimedia central control screen, and click to enter. After entering the settings menu, find the vehicle menu. Within the vehicle menu, select maintenance. In the maintenance menu, you can choose to turn the maintenance reminder function on or off. The maintenance interval in kilometers and time can be adjusted by touching the screen and selecting from the pop-up menu. After making adjustments, click the reset button at the bottom to complete the maintenance reset. The first maintenance for the Changan CS75 is due when the vehicle reaches 5,000 kilometers. The first maintenance is free of charge and includes services such as oil change, oil filter replacement, fuel filter replacement, and a comprehensive free inspection. Subsequent official maintenance cycles are also set at intervals of 5,000 kilometers each. The maintenance for the Changan CS75 is divided into minor and major services, with the major service due at around 40,000 kilometers. The Changan CS75 comes with a whole vehicle warranty of three years or 100,000 kilometers. The fuel filter for the Changan CS75 needs to be replaced every 25,000 kilometers, the air filter every 10,000 kilometers, the cabin air filter also every 10,000 kilometers, the brake fluid every 30,000 kilometers, the coolant every 30,000 kilometers, the spark plugs every 30,000 kilometers, and the transmission oil every 40,000 kilometers.
13
4
Share

What Causes the Abnormal Noise in Yueda Kia Cerato's Engine?

Here are the reasons for the abnormal noise in Yueda Kia Cerato's engine: Engine Abnormal Noise: The abnormal noise from the engine is more likely to originate from the engine compartment. Most people can determine that the noise comes from the engine compartment based on the sound source. It is usually a metallic screeching or a whistling noise. When abnormal noise occurs in the engine, it should be repaired promptly to prevent the fault from worsening. Transmission Abnormal Noise: The symptom of transmission abnormal noise is a "rustling" sound inside the transmission while the car is moving, which disappears when the clutch or accelerator is pressed. There may also be a whistling-like sound when shifting gears. If a specific gear makes noise, it is certainly related to the components affecting that gear's transmission. If all gears make noise, it is often due to a fault in the constant-mesh gear shaft or insufficient transmission oil.
15
2
Share

Is the Jetta VS7 underpowered?

Jetta VS7 is equipped with Volkswagen's renowned EA211 series 1.4T engine, with a maximum power of 110kW (150PS) and a maximum torque of 250N.m. It meets the stringent China VI-b emission standards. The engine is a domestically produced four-cylinder unit. In terms of power parameters, 150 horsepower is sufficient for daily use, though it is indeed slightly less powerful compared to larger displacement 2.0T engines. Introduction to the engine: An engine is a machine that converts other forms of energy into mechanical energy, typically transforming chemical energy into mechanical energy. Function of the engine: Its role is to convert the chemical energy from burning liquid or gas into thermal energy through combustion, and then transform the thermal energy into mechanical energy through expansion, thereby outputting power. Applications of the engine: Engines can be used as power generation devices or refer to entire machines that include power units (e.g., gasoline engines, aircraft engines).
18
1
Share

What is the size of the Xiali N3 audio speaker?

Xiali N3 audio speaker is five inches. Function: The speaker is the audio signal device of the car. During the driving process, the driver issues necessary audio signals as needed and required to warn pedestrians and attract the attention of other vehicles, ensuring traffic safety. It is also used for urging movement and transmitting signals. Working Principle: The working principle of the air horn is to use the airflow of compressed air to vibrate the metal diaphragm and produce sound. Therefore, it can only be used in vehicles equipped with an air compressor. Audio System: Includes software and media; audio source; pre-signal control; power amplification mechanism; speaker; transmission mechanism. Although audio equipment is only an auxiliary device for cars and does not affect the vehicle's performance, as people's demands for enjoyment increase, car manufacturers are paying more attention to the car's audio equipment and using it as one of the criteria for evaluating the comfort of the car.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.