···
Log in / Register

What causes the sluggish acceleration in the 7th-generation Accord?

4 Answers
McAdaline
08/31/25 8:14am

Honda Accord's sluggish acceleration is mainly due to insufficient fuel supply to the engine. Using a diagnostic tool to test the PGM-FI system and A/T system shows no fault codes. The speed in both D and R positions is 2500r/min, which is normal. The time lag test results are: 1.1s for D position and 1.2s for R position, with normal response in all gears. Basic inspections of the engine and automatic transmission also yield normal results. Additional relevant information is as follows: 1. Essential conditions for normal engine operation: Not only sufficient fuel supply but also adequate air intake. A clogged air filter or throttle system can lead to insufficient air intake. 2. Check the electrical system: Internal combustion engines require spark plugs to ignite the fuel entering the engine, so the condition of the spark plugs directly affects ignition performance. Spark plugs are consumables and need replacement after reaching a certain mileage.

Was this review help?
9
5
Share
DiLayla
09/13/25 4:25am

When it comes to the seventh-generation Accord experiencing sluggish acceleration and a muffled feel, my experience suggests this often stems from ignition system issues, such as aging spark plugs or faulty ignition coils, leading to unstable ignition and incomplete combustion. The car feels like it's holding its breath and can't get up to speed. The fuel system shouldn't be overlooked either—insufficient fuel supply from the fuel pump or clogged fuel injectors can starve the engine, making acceleration laborious. A dirty air filter or leaks in the intake pipe restrict airflow, causing the engine to sound muffled. Exhaust system problems are also significant, especially a clogged catalytic converter, which increases backpressure and resistance, making acceleration noticeably sluggish. I recommend first checking the spark plugs and air filter—these are consumables and inexpensive to replace. If there's no improvement, it's best to visit a professional shop for a comprehensive diagnosis to prevent minor issues from escalating into major safety concerns.

Was this review help?
2
0
Share
Expand All
Mitchell
10/27/25 5:12am

My seventh-generation Accord has been running for quite a while, and when it feels sluggish and lacks power during acceleration, I check a few key areas. First is the air filter – if it hasn't been replaced in six months and is clogged with dust, the engine can't get enough air, making it feel weak. Spark plugs could also be worn out, causing misfires that make the car shake noticeably. A clogged fuel filter can lead to insufficient fuel supply, resulting in poor acceleration. I've also experienced issues with an aging distributor causing unstable voltage. It's best to maintain these components regularly to prevent problems. I recommend DIY air filter replacement – it's low-cost and simple; otherwise, have a technician scan for trouble codes. Address car issues promptly to avoid roadside emergencies.

Was this review help?
20
4
Share
Expand All
LaJames
12/10/25 5:28am

Lack of power and sluggish acceleration are extremely dangerous; I've encountered this issue several times on the road. For seventh-generation Accords, this is often caused by ignition system failures, such as burnt spark plugs or leaking ignition coils, which reduce combustion efficiency and weaken the car's performance. A weakened fuel pump or carbon-clogged fuel injectors are also common culprits, disrupting fuel delivery. Exhaust issues, like a clogged catalytic converter, make things worse by increasing engine backpressure, resulting in a muffled sound. From a safety perspective, this increases the risk of rear-end collisions and may even lead to sudden stalling. Pull over immediately to inspect simple components, and if the problem persists, get it repaired right away—never drive a faulty vehicle.

Was this review help?
15
0
Share
Expand All
More Forum Discussions

How Long Does It Take to Service a Car?

Servicing a car typically takes about 1 hour. Car servicing refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car maintenance. The purpose of maintenance is to keep the car clean, ensure normal technical conditions, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service life. The benefits of maintenance include: 1. Ensuring the vehicle is in excellent performance condition; 2. Improving vehicle efficiency and reducing the wear of parts and tires; 3. Enhancing driving safety; 4. Avoiding potential hazards caused by vehicle issues; 5. Reducing noise and environmental pollution; 6. Keeping the vehicle's appearance clean and preventing damage.
4
4
Share

How to set up one-touch up/down for the Haval F7 window remote control?

The method to set up one-touch up/down for the Haval F7 window remote control is: 1. Switch the ignition to the ON mode, pull up the window switch with the one-touch function past the pressure point until the window is fully closed; 2. Hold for about 2 seconds, then operate the window switch again to perform one-touch down and one-touch up once. Taking the 2021 Haval F7 as an example, it is a compact SUV with body dimensions of: length 4620mm, width 1846mm, height 1690mm, wheelbase 2725mm, and a fuel tank capacity of 55L. The 2021 Haval F7 features a MacPherson independent front suspension and a double-wishbone independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169PS, maximum power of 124kW, maximum torque of 285Nm, and is paired with a 7-speed dual-clutch transmission.
18
0
Share

Which generation is the Golf currently in?

The Golf is currently in its 7th generation. The Golf is a compact car under the Volkswagen brand. Taking the 2021 Golf 7 as an example, its body dimensions are: length 4296mm, width 1788mm, height 1471mm, with a wheelbase of 2636mm, a fuel tank capacity of 51 liters, and a curb weight of 1310kg. The 2021 Golf 7 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 200Nm, paired with a 7-speed dual-clutch transmission.
1
2
Share

How to adjust the time on a Golf?

The method to adjust the time on a Golf is: 1. After turning on the car, locate the CLK button which displays and sets the time; 2. Press and hold the CLK button for about 5 seconds until the time display starts flashing; 3. Use the adjustment buttons, turning left to decrease and right to increase; 4. Press the hour and minute selection buttons to adjust the time, then press the CLK button again. If there is no action for a few seconds, it will exit the adjustment mode. Taking the 2021 Volkswagen Golf as an example, it is a compact car with body dimensions of: length 4296mm, width 1788mm, height 1471mm, wheelbase of 2636mm, fuel tank capacity of 51L, and trunk capacity of 380L. The 2021 Volkswagen Golf is equipped with a 1.2T turbocharged engine, with a maximum horsepower of 116PS, maximum power of 85kW, maximum torque of 200Nm, and is paired with a 7-speed dual-clutch transmission.
10
2
Share

Which gear is generally used in Subject 3?

During the Subject 3 driving test, the examination requirements stipulate that the test vehicle should start in 1st gear, transition to 2nd gear, and use 3rd and 4th gears for normal driving speeds. Additionally, it is required to drive no more than 50 meters in 1st gear and no more than 300 meters in 3rd gear. When encountering turns or U-turns, the driver should signal, shift to 2nd gear, and reduce speed. Below is an introduction to the Subject 3 test: 1. The road driving skills test for Subject 3 generally includes: preparation before driving, simulated lighting test, starting, driving straight, shifting gears, changing lanes, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. 2. The safe and civilized driving knowledge test generally includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
6
4
Share

Are There No Street Lights on Highways?

Highways generally do not have street lights installed except for important bridge surfaces and tunnels. When driving on highways, it is necessary to use vehicle lights properly to ensure driving safety. During normal driving, turn on the night lights and width indicator lights. If there are no vehicles ahead, you can appropriately turn on the high beams to observe the road conditions. Precautions for driving on highways at night: 1. Familiarize yourself with various indicator lights on the vehicle: When driving at night, you need to understand the car's lights and pay attention to their positions, including which lights to use in different environments. Use light changes to alert vehicles in front and behind to avoid traffic accidents on the highway. 2. No speeding: Driving speeds on highways are already relatively fast, and with obstructed vision at night, the safety risks are higher, making traffic accidents more likely. 3. Maintain a safe following distance: Due to the high speeds on highways, drivers need to control the distance and keep a safe gap. Rear-end collisions are a common type of traffic accident on highways, mainly caused by poor distance control. 4. Stay away from large trucks: There are many large trucks on highways. When encountering them, avoid driving side by side with large trucks.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.