What Causes the Scraping Sound When the Car is Running?

What are the dimensions of the Nissan Qashqai?

Nissan Qashqai has body dimensions of 4401mm in length, 1837mm in width, and 1611mm in height, with a wheelbase of 2646mm. Methods for measuring car dimensions: The definition of car body length is the distance between the two extreme points in the length direction of the car, measured from the most protruding point of the front bumper to the most protruding point of the rear bumper. The definition of car body width is the distance between the two extreme points in the width direction of the car, which is the distance between the leftmost and rightmost protruding points. The definition of car height is the distance from the ground to the highest point of the car. The highest point refers to the tallest position on the car's roof, excluding the length of the roof antenna. Powertrain of the Nissan Qashqai: The Nissan Qashqai is equipped with a new MR20DD naturally aspirated direct-injection engine and a simulated 7-speed CVT transmission. The main technological advancements include the addition of direct injection and TwinVTC technology. The MR20DD engine with direct injection technology increases the fuel supply pressure from the traditional low pressure (about 5Bar) to over 100Bar through a high-pressure pump.

6

0

Share

Will the Subject 3 Result Be Canceled If Subject 4 Is Not Passed?

Normally, if you fail Subject 4, your Subject 3 result will not be canceled. However, if you fail five times, all previous results will become invalid, and you will need to retake the exams. Article 32 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses' states that for first-time applicants or those applying to add a permitted vehicle type, after passing Subject 1, the vehicle management office should issue a driving skill test permit within one day. The driving skill test permit is valid for three years, and the applicant must complete Subjects 2 and 3 within this period. If the exams are not completed within the specified time, all previous results will be invalidated. Generally, obtaining a driver's license involves four subjects, commonly referred to as Subject 1, Subject 2, Subject 3, and Subject 4. Subjects 1 and 4 are theoretical exams, while Subjects 2 and 3 are practical road tests that require driving on the road. These can be quite challenging for beginners and often take more time. If you fail the exams for Subjects 2 and 3 five times during the learning process, all previously passed exams will be invalidated, and you will need to re-enroll and start over.

14

4

Share

What Causes the Exhaust Controller Malfunction Light to Illuminate?

The reasons for the exhaust controller malfunction light to illuminate are: code fault, intake pressure sensor failure, and oxygen sensor failure. Code fault: A fault code is reported, but the system operates normally. This may be due to an operation exceeding the computer's control range, resulting in a feedback fault code that can be cleared initially. Solution: When a fault occurs in the car engine, the computer detects it and displays a fault code. Using this code, maintenance personnel can accurately locate the faulty component and proceed with repairs. Intake pressure sensor failure: Based on computer detection information and further inspections, a certain fault is identified that does not significantly affect normal driving or has minimal impact, indicating an intake pressure sensor failure that requires timely detection and resolution. Solution: Disconnect the intake manifold pressure sensor's wiring harness plug, then turn on the ignition switch without starting the engine. Use a voltmeter to measure the voltage between the power terminal and the ground terminal on the wiring harness plug. The value should comply with specifications; otherwise, further inspection is needed to ensure the circuit between the intake manifold pressure sensor and the electronic control unit is conducting. If there is a break, replace or repair the electronic control circuit wiring harness. Oxygen sensor failure: Severe impact on the engine's normal operation is felt during driving, indicating an oxygen sensor issue that requires immediate repair. Solution: Pay attention to fuel quality, check if the spark plugs and ignition coil's operating voltage is normal, and ensure the three-way catalytic converter is functioning properly without any blockages.

7

4

Share

Are There Lockers for the Subject 1 Exam?

There are lockers available for the Subject 1 exam. During the exam, items such as mobile phones cannot be brought into the exam area and can be stored in the lockers. For the Subject 1 exam, you need to bring your ID card. Please note that an expired ID card cannot be used. Exam Procedure: Follow the instructions of the staff and collect your driving school file in order in the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off when entering the exam area; No loud noises are allowed in the exam area; Regulation textbooks are not allowed in the exam area (or should be placed in your bag); After the exam, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the exam area; Candidates who pass the exam should sign under the guidance of the staff at the exam exit before leaving; Candidates who fail the exam can leave immediately and wait for notification from their driving school regarding the retake schedule. The Subject 1 exam is conducted on a computer, consisting of 100 questions with a total duration of 45 minutes. The question types include true/false and multiple-choice questions. Content of the Subject 1 Exam: The exam covers basic driving theory, road safety laws and regulations, traffic signals, rules of the road, and other fundamental knowledge, plus local regulations. The scheduling of the driver's theory exam is determined by the local vehicle management office.

15

0

Share

Where are MG cars produced?

MG cars are a brand of Shanghai Automotive Industry Corporation (SAIC), under the passenger vehicle division of SAIC Motor Corporation Limited. The production base for MG cars in the Chinese market is located in Nanjing, while the production base for the international market is in Longbridge, UK. Current MG car models include the MG7 series, MG3 series, MG6, MG HS, and MG TF. The MG7 is a mid-size sedan under SAIC, with body dimensions of 4749mm in length, 1761mm in width, and 1421mm in height, a wheelbase of 2749mm, and a three-box sedan body structure. Its top speed is 215 km/h.

9

1

Share

What Does Hybrid Car Mean?

Hybrid car refers to a vehicle that has two or more power sources, also known as a composite power vehicle. The types of hybrid vehicles are divided into: 1. Parallel hybrid electric vehicles where the engine is the main power source and the electric motor serves as an auxiliary power source; 2. Series-parallel hybrid vehicles that rely solely on the electric motor for driving at low speeds, with the engine and electric motor working together at higher speeds; 3. Series hybrid vehicles that are driven solely by the electric motor. The components of a hybrid car include: battery, fuel cell, solar battery, and the generator of the internal combustion engine.

13

3

Share

What Causes the Scraping Sound When the Car is Running?

What are the dimensions of the Nissan Qashqai?

Will the Subject 3 Result Be Canceled If Subject 4 Is Not Passed?

What Causes the Exhaust Controller Malfunction Light to Illuminate?

Are There Lockers for the Subject 1 Exam?

Where are MG cars produced?

What Does Hybrid Car Mean?

Must Subject 4 Be Taken Within 10 Days After Passing Subject 3?

Is the Volkswagen DSG Transmission Software Upgrade Effective?

How to reset the maintenance light on the Citroën C3-XR?

Why does the Cruze idle shake but stops shaking when accelerating?