What Causes the Rumbling Sound When Tires Are Rolling?

2 Answers
SanElla
07/24/25 10:21am
Abnormal noises from tires while driving may be due to inaccurate four-wheel alignment of the vehicle. Long-distance driving causes significant wear on the tires, leading to uneven wear and resulting in abnormal sounds. Below is relevant information about vehicle tires: 1. Tire Replacement Time: The frequency of replacing car tires can be determined based on the tire's wear indicators. Generally, the replacement cycle is approximately every 3-5 years or 40,000-60,000 kilometers. 2. Consequences of Low Tire Pressure: Low tire pressure can lead to sidewall cracking, rubber aging, increased driving load, higher fuel consumption, damage to the tire bead, and risks such as tire blowouts. Typically, the front tire pressure for a passenger car is 2.2-2.3 bar when unloaded and 2.4-2.5 bar when fully loaded.
Was this review help?
8
3
Share
LaJosephine
08/11/25 5:30am
Last time I drove, I also experienced a rumbling noise from the tires. At first, I thought it was a minor issue, but upon inspection, I found uneven wear on the tire surface, with bumps or pits. It could also be caused by foreign objects stuck in the tread, like stones or nails, which produce strange noises when rolling. Additionally, suspension system issues, such as worn shock absorbers or damaged wheel bearings, can lead to such noises, affecting driving stability and safety. To troubleshoot, you can first check if the tire pressure is within the standard range (usually indicated on the door label). If no foreign objects are found, promptly visit a professional auto repair shop for diagnosis to avoid losing control at high speeds. Regular tire maintenance is truly important—just like taking care of your body—it can save you a lot of trouble.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

How Many Kilometers Should Vehicle Clutch Plates Be Replaced?

Generally speaking, clutch plates can be replaced every 100,000 kilometers. However, due to different driving habits of drivers, the road conditions they encounter daily, and the mileage they travel, the replacement cycle may vary. Some vehicles may not require replacement even after exceeding 100,000 kilometers, while others may need replacement once a year. Therefore, when replacement is needed depends on the degree of wear. Extended Information: The clutch three-piece set: The working process of the clutch can be roughly divided into the separation process, the slip grinding process (semi-engagement process), and the engagement process. Every time the clutch is used, the clutch plates are worn during the slip grinding process. Proper use of the semi-engagement process can ensure smooth vehicle starting and reduce gear shift jerks; abuse of the semi-engagement process will lead to excessive wear of the clutch plates and the need to replace the clutch three-piece set.
5
4
Share

What is Lane Change Assist?

Lane Change Assist is an intelligent automotive safety technology that alerts drivers to obstacles or approaching vehicles within the safe range behind them through installed electronic control systems, typically via indicators on the side mirrors or other locations. Whether you're a novice driver or an experienced one, blind spots during lane changes are inevitable while driving. Additional information: 1. Forms of Lane Change Assist: It alerts drivers to approaching vehicles from behind via indicators on the side mirrors or other locations. This system automatically activates only when changing lanes at speeds above 60 km/h and won't function at lower speeds. 2. Vehicle Detection: It can detect vehicles approaching from the side or rear up to 50 meters away. If the system detects another vehicle, it notifies the driver via an LED indicator on the side mirror. If the driver activates the turn signal while preparing to change lanes but fails to notice vehicles in adjacent lanes, the system will warn the driver by flashing the LED signal.
5
2
Share

What are the symptoms of a problematic car transmission?

Issues such as transmission slipping, oil leakage, and jerking may occur. The following are symptoms of a problematic transmission: 1. Transmission slipping: While driving, if you hear the engine revving without a noticeable increase in speed, experience weak acceleration, or notice poor uphill performance with inexplicably high engine RPM while normal on flat roads. 2. Transmission jerking: Symptoms include noticeable jerking or shaking during gear shifts while driving. Possible causes include excessively high transmission fluid temperature, stubborn dirt and impurities inside, or valve body blockage leading to transmission jerking. Please visit a 4S shop or repair shop for inspection and maintenance. 3. Transmission noise: This manifests as inexplicable noises from the transmission during driving, with no identifiable source, sometimes loud, and intermittent or very dull during gear shifts. The causes of transmission noise are complex, possibly due to long-term high temperatures reducing the anti-wear and lubricating properties of transmission fluid, leading to wear or damage to components like bearings and gears.
2
1
Share

What are the requirements for gear shifting in the Subject 3 driving test?

The gear shifting requirement in the Subject 3 driving test is to be completed within 100 meters, with the gear sequence being 2nd gear, 3rd gear, 4th gear, and then back to 3rd gear. First, shift from a lower gear to a higher gear, and then shift back from the higher gear to the lower gear. Below are some mnemonic tips for gear shifting: 1. Right before left: The right side is for the accelerator and brake, while the left side is the clutch pedal. Whether shifting up or down, always start with the accelerator or brake on the right side, and after matching the speed, press the clutch pedal. 2. Act immediately: After pressing the clutch pedal, act immediately. Use your left hand to steady the steering wheel and your right hand to shift gears quickly. 3. Left up, right down like a seesaw: Coordinate the accelerator and clutch. Slowly release the clutch, pause slightly at the semi-engaged position, and gently press the accelerator without stepping too hard—up and down like a seesaw.
5
3
Share

Where to Adjust the Headlight Height of the Elysion?

The headlight height of the Elysion is automatically adjusted. The vehicle can automatically adjust the headlight height based on changes in light or external environment. Below is a detailed introduction to the classification of car lights: 1. Headlights - The combined headlights are located at the front of the vehicle, primarily serving the purpose of illumination and signaling. The light emitted by the headlights can illuminate the road conditions ahead of the vehicle, enabling the driver to drive safely at night. 2. Taillights - The combined taillights are located at the rear of the vehicle, mainly serving the purpose of illumination and signaling. 3. Turn signals - Used to indicate left or right turns to other road users. Regulations require them to be amber in color. 4. License plate light - Primarily illuminates the license plate, allowing people to identify the vehicle's license plate at night.
20
0
Share

What car logo is one horizontal and one vertical?

A logo with one horizontal and one vertical line is the Chevrolet emblem. Here are more details about Chevrolet: 1. As the largest brand under General Motors, Chevrolet can be considered one of the most successful automotive brands in the world based on cumulative production volume to date. It ranks first in U.S. sales charts. Chevrolet offers an exceptionally wide range of models, from compact cars to large four-door sedans, from vans to full-size pickup trucks, and even from SUVs to sports cars—consumers can find a corresponding model for virtually any vehicle type they need. 2. The Chevrolet logo represents a stylized bowtie, with 'Chevrolet' being the name of Swiss race car driver and engineer Louis Chevrolet. It symbolizes the elegance, prestige, and grace of Chevrolet vehicles. Chevrolet's remarkable achievements are largely attributed to the value and cutting-edge technology embedded in its products. Many contemporary automotive technologies originated from Chevrolet's innovations, such as being the first to adopt electronic ignition, the first to equip cars with radios and automatic transmissions. Its pioneering designs also include electric brakes, power windows, power seats, and advanced high-power V8 engines, among others.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.