What Causes the Roewe 350 Engine to Shake at Idle Speed?

What are the reasons for increased fuel consumption after an engine overhaul?

After an engine overhaul, the increased fuel consumption is due to the new parts being more precisely machined and tighter, which increases the engine's workload, leading to higher fuel consumption. This is a normal situation. Reasons for increased fuel consumption after an engine overhaul: The viscosity of the engine oil used increases, and higher viscosity oil is generally better. The primary function of engine oil is lubrication, and higher viscosity indicates better quality. However, if the oil viscosity is too high, the engine will encounter greater resistance during high-load operation, consuming more power and, consequently, significantly increasing fuel consumption compared to before. Precautions after an engine overhaul: Avoid high engine speeds; it's best not to exceed 3,000 RPM. After a cold start, it's advisable to warm up the engine for a while before driving, typically about 5 minutes, until the water temperature begins to change. Adhere to the vehicle's specified load capacity, preferably not exceeding 70% of the maximum load. Avoid sudden acceleration and hard braking whenever possible. Hard braking can cause significant impact damage to the new engine, especially during sudden acceleration, which can severely affect the break-in of new engine components and directly impact the fit between parts. Anticipate sudden situations while driving, maintain a steady speed, and drive smoothly. Keep the speed between 50-80 km/h, but avoid prolonged low-speed driving. Pay attention to gear changes and avoid driving in a single gear for extended periods.

14

0

Share

How Early Can You Renew an Expiring Driver's License?

You can renew an expiring driver's license up to 90 days in advance. The motor vehicle driver should apply for renewal at the vehicle management office where the driver's license was issued within 90 days before the expiration date of the license. When applying, you need to fill out the "Motor Vehicle Driver's License Application Form". Documents required for renewal: Bring two copies of your ID card, two 1-inch recent color photos without a hat, the original ID card, the original driver's license, and a medical examination certificate from a county-level or above hospital (free physical examinations are also available at the vehicle management office). Renewal process: The motor vehicle driver should bring the required documents to the vehicle management office where the driver's license was issued to apply for renewal. The vehicle management office will process the renewal within one working day after approval. Regulations on the expiration of driver's licenses: If the license has been expired for less than one year, it can be renewed normally; if it has been expired for more than one year but less than three years, the license will be canceled, but it can be renewed by passing the subject one test; if it has been expired for more than three years, the license will be invalid and cannot be renewed.

20

3

Share

Should Gear Shifting Be Fast or Slow?

Gear shifting speed should vary from person to person. Faster shifting is more beneficial for the durability of manual transmissions; slower shifting keeps the clutch in a semi-engaged state for a longer time, which can easily wear out the clutch plates. Precautions for gear shifting: When shifting gears, keep your eyes on the road ahead and avoid looking down at the gear lever. Always depress the clutch pedal fully when shifting; otherwise, gear grinding may occur. If you can't engage a gear, fully depress the clutch, lightly tap the accelerator, and then try shifting again—avoid forcing it. Generally, avoid skipping gears when upshifting. Only shift into reverse after the car has come to a complete stop to prevent damage to the transmission. Gear shifting techniques: For manual transmission cars, remember the principle: "accelerate before upshifting, decelerate before downshifting." Before upshifting, rev the engine to increase speed, and before downshifting, ease off the accelerator to reduce speed. Always fully depress the clutch pedal before shifting, and operate the gear lever gently, quickly, smoothly, and accurately. Time your shifts correctly—shift when the engine is around 2000 RPM. Press the accelerator slightly before depressing the clutch to prevent forced disengagement, then shift. Skipping gears is not recommended. Downshift based on vehicle speed and your car's condition; generally, downshift when the engine RPM drops below around 1500.

4

3

Share

What level of car does the BMW 6 Series GT belong to?

BMW 6 Series GT belongs to the C-segment car, equipped with a 3.0T inline 5-cylinder turbocharged engine. Taking the 2021 BMW 6 Series GT as an example, its body dimensions are: length 5103mm, width 1904mm, height 1550mm, wheelbase 3070mm, and fuel tank capacity 68L. The 2021 BMW 6 Series GT features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is powered by a 2.0L turbocharged engine with a maximum horsepower of 258PS, maximum power of 190kW, and maximum torque of 400Nm, paired with an 8-speed automatic transmission.

18

4

Share

Which MG 5 models have driving mode selection?

These MG 5 models have driving mode selection: 300TGI Automatic Qing Luxury Trend Edition; 300TGI Automatic Qing Luxury Premium Edition; 300TGI Automatic Qing Luxury Flagship Edition; 300TGI Automatic Chao Yue Qing Luxury Limited Edition. The 2021 MG 5's automatic transmission offers multiple driving modes, commonly including "Eco Mode", "Sport Mode", or "Snow Mode". If the MG 5 is equipped with driving mode switching, it is recommended that MG 5 owners use Eco Mode for daily driving, select "Snow Mode" when driving in snowy conditions, and use "Sport Mode" when higher power demands are required.

9

0

Share

Is changing the color of a car emblem considered modification?

Changing the color of a car emblem is considered modification. Below is an introduction regarding vehicle color modification: According to Article 10 of the "Regulations on the Registration of Motor Vehicles," if a registered motor vehicle falls under any of the following circumstances, the owner of the vehicle must apply to the vehicle management office at the place of registration for a modification registration. (1) Changing the body color. (2) Replacing the engine. (3) Replacing the body or frame. (4) Replacing the entire vehicle due to quality issues. (5) Changing the use nature, such as converting a commercial vehicle to a non-commercial vehicle or vice versa. (6) The vehicle owner's residence moves out of or into the jurisdiction of the vehicle management office. In such cases, an application for modification registration can be made to the vehicle management office at the place of registration.

17

3

Share

What Causes the Roewe 350 Engine to Shake at Idle Speed?

What are the reasons for increased fuel consumption after an engine overhaul?

How Early Can You Renew an Expiring Driver's License?

Should Gear Shifting Be Fast or Slow?

What level of car does the BMW 6 Series GT belong to?

Which MG 5 models have driving mode selection?

Is changing the color of a car emblem considered modification?

Must the seat belt be replaced if the airbag deploys?

Does the vehicle inspection valid until August mean until the end of August?

What Causes the Front Shock Absorber of a Car to Make Abnormal Noises?

What are the consequences of a motorcycle cylinder head gasket leak?