What Causes the Roaring Sound When Accelerating in Baojun 730 Engine?

1 Answers
Theresa
07/29/25 6:10pm
Baojun 730 engine roaring sound during acceleration can be caused by the following reasons: 1. Engine misfire: Leads to increased fuel consumption, black smoke emission, weak acceleration, and severe shaking. 2. Clutch slipping: Results in incomplete gear engagement or disengagement. 3. Low fuel rail pressure: Caused by dirty throttle position sensor or voltage imbalance leading to electronic throttle failure.
Was this review help?
4
1
Share
More Forum Discussions

Where is the fuse box located in the Buick Envision?

The fuse box of the Buick Envision is located behind the cover panel on the far left side of the driver's dashboard. If you need to replace a fuse in the Buick Envision, follow these steps and precautions: 1. Turn off the vehicle and shut down all power sources. If it's a mechanical key, remove it. 2. Locate the corresponding position and use a small pry tool to lift the protective cover. 3. Use a test pen to check if the fuse is blown. If it is damaged, remove it with tweezers and replace it. 4. Install the new fuse, ensuring that its current and other parameters match the original fuse. 5. If the corresponding component still does not work after replacement, seek professional repair immediately.
13
2
Share

How to Fold Down the Rear Seats in Ford Escort?

Ford Escort models have the following steps to fold down the rear seats: 1. Move the front seats forward. 2. Retract the rear seat armrest. 3. Store the rear seatbelt buckles. 4. Lower the headrests to the lowest position. 5. Pull the seat release switch located at the shoulder of the rear seat to fold it down. For other Ford models, the rear seat folding methods are as follows: Method 1: 1. Open the rear door. 2. Pull the seat release handle on the rear seat. Method 2: 1. Open the trunk. 2. Press the rear seat folding button located on one side of the trunk, and the rear seats will fold down automatically.
14
5
Share

How to Open the Hood of a Jeep Compass?

There is a square-shaped lever located on the lower left side inside the driver's position. Pull it to release the hood spring, then move it to the left and lift the hood. Additional information regarding hood adjustment and installation is as follows: 1. Hood Removal. Open the hood, cover the car body with a soft cloth, detach the windshield washer nozzles and hoses from the hood, mark the hinge positions of the hood, and remove the bolts fixing the hood to the hinges to prevent the hood from slipping after bolt removal. 2. Hood Installation and Adjustment. Hood installation should be performed in the reverse order of removal. Before tightening the bolts fixing the hood to the hinges, adjust the hood forward, backward, left, and right. The height can be adjusted using hinge shims and rubber buffers to ensure uniform gap alignment. 3. Adjustment of the Foldable Hood Lock Control Mechanism. Before adjusting the hood lock, properly align the hood, loosen the fixing bolts, move the lock head forward, backward, left, and right to align with the lock seat. The front end of the hood can be adjusted in height via the dovetail bolt on the lock head.
16
3
Share

How to Replace the Battery of Baojun 630 Key?

Baojun 630 key battery replacement steps are as follows: 1. Flip the small switch on the key to remove the mechanical key. 2. Pull out the mechanical key. 3. Use a screwdriver or a thin tool to pry open and rotate along the gap to separate the smart key. 4. Take out the old battery and replace it with a new one. More information about Baojun 630 is as follows: 1. Baojun 630 maintains its consistent grand and handsome style, with detailed adjustments making the overall appearance more fashionable. The new body colors use more vibrant and stylish coral red and sea blue to replace the slightly more subdued agate red and sapphire blue. 2. Baojun 630 adds a new interior color: "Saddle Brown". The material is made of engineering plastic, and the panel features irregular patterns with improved craftsmanship.
11
2
Share

What to Do About Noise from the Front Passenger Seat of the Buick Verano?

Solution: Remove the inner door panel for further inspection and maintenance. If the noise is caused by loose screws, simply tighten them; if the clips are damaged, replace them with new ones. Noise from the front passenger seat of the Buick Verano is usually due to loose screws or damaged clips inside the inner door panel. More information about the Buick Verano is as follows: 1. The Buick Verano is a mid-size sports sedan from SAIC-GM Buick. As a new-generation global strategic model for Buick, the Verano integrates GM's global advantages and resources to create a unified GM product. 2. The Buick Verano combines a stylish and dynamic exterior, a refined and comfortable driving space, and precise and agile performance. 3. The Buick Verano offers a new driving experience for the next generation of elites. The Buick Verano made its global debut in 2015 as a strategic model; the all-new Buick Verano was launched in 2019, further enhancing its "Born to Run" dynamic genes.
13
2
Share

Where is the cabin air filter located in the 2011 Tiida?

2011 Tiida cabin air filter is located in the glove compartment in front of the passenger seat. Additional information about the 2011 Tiida cabin air filter is as follows: 1. The 2011 Tiida cabin air filter purifies the air entering the vehicle interior from outside, improving air cleanliness and preventing windshield fogging. It typically filters impurities in the air such as microscopic particles, pollen, bacteria, industrial exhaust, and dust. The purpose of the cabin air filter is to prevent these substances from entering the AC system, thereby protecting the system and providing occupants with a clean air environment that safeguards their health. 2. When the 2011 Tiida AC has weak airflow during cooling or heating, but the AC system is functioning normally. Cause: Poor ventilation efficiency of the cabin air filter or prolonged usage. Solution: The cabin air filter needs to be replaced promptly. 3. When the 2011 Tiida AC emits unpleasant odors. Cause: The AC system hasn't been used for an extended period, leading to dampness and mold in the internal system and cabin air filter. Solution: Clean the AC system and replace the cabin air filter.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.