What Causes the Reverse Gear Shaking in Passat?

1 Answers
Victoria
07/29/25 3:18pm
Passat reverse gear shaking reasons are as follows: Excessive engine carbon deposits and other reasons: There is a certain amount of carbon deposits inside the vehicle's engine, with the deposits located in the throttle and fuel injector; the vehicle's ignition system has malfunctioned, requiring inspection of the spark plugs, high-voltage wires, and ignition coils; unstable fuel pressure; aging engine mounts, etc., can all cause reverse gear shaking. Precautions for using the R gear: When engaging the reverse gear, the vehicle must be in a completely stopped state to avoid damaging the transmission. When reversing, the speed must not be too fast, as excessive speed can lead to loss of control and pose a danger. While reversing, it is essential to observe the vehicle's left and right rearview mirrors.
Was this review help?
12
3
Share
More Forum Discussions

What does a 'beihu' car mean?

'Beihu' car refers to a vehicle that cannot be transferred to a new owner, and purchasing such a car is illegal. A 'beihu' car is a completely normal vehicle with all necessary documents possibly in order, and annual insurance payments up to date, except for the lack of ownership transfer. Regulations: According to the 'Resident Identity Card Law of the People's Republic of China', renting, lending, or transferring a resident identity card is illegal. Therefore, 'beihu' for profit is illegal. Agreements for selling cars through natural backdoors are also not protected by law. Reasons for the lack of ownership transfer after vehicle transactions: the license plate registration location is too far, making the cost of going to the registration location too high; vehicles used to repay debts, which may have gone through multiple rounds of debt repayment without clear records; the owner has passed away without the vehicle being deregistered; transferring license plates with the car in restricted areas; relocated vehicles that cannot be registered locally due to relocation restrictions; some scammers may also sell non-grade vehicles as 'beihu' cars at low prices.
20
0
Share

How Long After Subject 2 Can You Take Subject 3?

There is a 10-20 day interval between Subject 2 and Subject 3. You can schedule the Subject 3 exam online 10 days after passing Subject 2. Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's exam. Within 15 days after passing the Subject 3 road test, you can register for Subject 4. Notes: During the Subject 2 and Subject 3 exams, it is essential to learn how to adjust the seat position. Always fasten your seatbelt while driving, as safety comes first. Try to slow down the speed while driving and observe the car's specific position through the rearview mirror. Driver's License Exam Modes: Sequential Interval Exam Mode: In this mode, you can schedule the Subject 3 exam online 10 days after passing Subject 2. However, these 10 days are only theoretical in practice. Many students in reality don't have time to practice driving and can only do so for one or two days on weekends. Practicing Subject 3 intermittently like this requires a long time to master. Only when the Subject 3 coach believes the student's practice is close to the exam level will they schedule the Subject 3 exam for the student. Combined Exam Mode: 30 days after passing Subject 1, you can start scheduling Subject 3. However, there is a prerequisite for scheduling Subject 3: you must complete the required training hours, which is a regulation for exam registration.
13
0
Share

Should the position light be adjusted back to the low beam first in Subject 3?

It is necessary to switch back to the low beam. The simulated lighting is divided into seven types: high beam, low beam, alternating between high and low beams, left turn signal, right turn signal, temporary parking on the roadside, and driving in foggy weather. Parking: If the next command is temporary parking on the roadside, you should switch back to the low beam, then turn on the position light, followed by the hazard lights. Overtaking: If the command is to overtake, you should also first switch back to the low beam, then turn on the left turn signal, turn it off, flick the high and low beams twice alternately, turn on the right turn signal, and then turn it off. Note: Remember, after hearing the voice prompt, you must perform the relevant operation within 5 seconds; after all operations are completed, you also need to turn off all lights within 5 seconds.
13
3
Share

How many kilometers can a car run on the highway during the break-in period?

New cars can go on the highway after a break-in period of 5,000 kilometers. However, during the break-in period, it is advisable to avoid high-speed driving above 90 km/h. When the new car has traveled about 5,000 kilometers and is about to complete the break-in period, the owner can briefly run the engine above 4,000 rpm to reduce carbon deposits and improve engine performance. Additional break-in considerations for new cars: Avoid driving at full load during the break-in period, as excessive load increases the burden on the engine and transmission, leading to excessive power output and accelerated wear of components. Avoid prolonged use of low gears to ensure all gears are properly broken in.
13
3
Share

Can a Photocopy of the Vehicle License Be Used on the Road?

A photocopy of the vehicle license cannot be used on the road. Below is a detailed introduction about the vehicle license: Overview: The motor vehicle license is the legal document that permits a motor vehicle to drive on roads within China. The license consists of three parts: the license holder, the main page, and the supplementary page. The front of the main page contains the endorsed core, while the back has a photo of the vehicle, sealed in plastic. The supplementary page is the endorsed core. Relevant regulations: Article 17 of the "Road Traffic Management Regulations" promulgated by the State Council stipulates that vehicles must pass the inspection by the vehicle management authority and obtain license plates and a vehicle license before they are allowed to drive. Therefore, holding the "Motor Vehicle License" is one of the prerequisites for a vehicle to be driven on the road. Driving without the license is a violation of regulations.
3
0
Share

Can You Skip Gears When Downshifting in Subject 3?

In the Subject 3 driving test, you can skip gears when downshifting, but you cannot skip gears when upshifting. During the Subject 3 test, before shifting gears, you must first adjust the speed to match the gear you are shifting into, and then proceed with the gear change. Many stops at intersections require skipping gears when downshifting. After the gear shifting operation begins: according to the voice prompt, shift to second gear (at this point, press the clutch, shift to third gear, and immediately accelerate to around 35 km/h, making sure not to exceed 40 km/h), the voice prompt will instruct you to shift to third gear (press the clutch, release the throttle, and shift to fourth gear), the voice prompt will instruct you to shift to fourth gear (release the throttle, press the clutch, and downshift to third gear), the voice prompt will instruct you to shift to third gear (press the clutch, release the throttle, shift to second gear, gently press the brake pedal, and reduce speed to 25 km/h).
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.