What Causes the Red Oil Can Light to Illuminate?

Where is the OBD interface located on the Focus?

The OBD interface of the Focus is located in the storage compartment below the light control switch. Below is detailed information about the OBD interface: 1. The OBD interface is generally used to communicate with the vehicle's electrical systems, such as the onboard computer. 2. The new Focus uses a CAN bus system, and all electrical systems connected to the CAN network can be read and modified through the OBD interface. 3. The OBD system continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed standards. If they do, it will immediately issue a warning. 4. After the vehicle is turned off, the OBD system will automatically enter a dormant state.

15

2

Share

Where is the Cruze's Cabin Air Filter Located?

The cabin air filter of the Cruze is located behind the glove box. If you need to replace it, here are the steps for replacing the cabin air filter of the Cruze: 1. There are clips on both sides of the glove box. Pinch the glove box clips and pull the glove box out to the right. 2. The cabin air filter is behind the glove box. The filter cover has three clips. After opening it, you can easily remove the dirty filter. 3. Install the new cabin air filter and then reinstall the glove box by reversing the previous steps. 4. When removing the glove box, do not open the storage compartment at too wide an angle, as this may pull out the connecting rod of the storage compartment, causing unnecessary trouble.

18

3

Share

How to distinguish between BMW 3 Series and BMW 5 Series, and what are the differences?

BMW 3 Series and 5 Series differ in positioning, power, and pricing. There are color differences between the 3 Series and 5 Series. Red and blue BMWs are usually 5 Series, while white and brown BMWs are mostly 5 Series. The 3 Series is positioned as a family car, while the 5 Series is positioned as a business car. Below are the differences between the BMW 3 Series and 5 Series: 1. Different positioning: The BMW 3 Series is a sporty B-segment car, while the 5 Series is a luxury C-segment car. 2. Different interiors: BMW's cabin interiors have always maintained a driver-centric design philosophy, which is reflected in both the new 3 Series and the current 5 Series. Sitting in the driver's seat, you will experience an almost perfect ergonomic design, with all screens and buttons arranged logically and within easy reach. Although the designs differ, the overall craftsmanship and materials of the 5 Series interior are more premium than those of the 3 Series. 3. Different powertrains: The new 3 Series is equipped with a B48 engine paired with an 8AT transmission. The 325 model has a maximum power of 135 kW and a peak torque of 300 N·m, while the 330 model has a maximum power of 190 kW and a peak torque of 400 N·m. The BMW 5 Series 525 model also uses the B48 engine, with a maximum power of 135 kW and a peak torque of 290 N·m.

9

3

Share

How to Fix a Faulty Radiator in Chevrolet Cruze?

Here are the solutions for a faulty radiator in Chevrolet Cruze: 1. Water leakage issue: It is recommended to check the water pump and its impeller for damage. If damaged, repair or replace them promptly. 2. Check if the engine has excessive carbon buildup, which can cause the radiator to overheat and lead to loose components. If this occurs, add engine oil promptly and increase lubrication to prevent accidents while driving. 3. Abnormal fan operation or broken fan belt: If these issues arise, immediately replace or repair the fan and belt to ensure normal operation.

6

0

Share

How to Use Cruise Control in the New X-Trail?

Method to activate cruise control in the new X-Trail: 1. Press the control switch to arm the cruise control. After accelerating to the desired speed, push the control lever downward to set the cruising speed. To accelerate, push the control lever upward or press the accelerator pedal. To cancel cruise control, pull the control lever upward, turn off the main cruise control switch, press the accelerator pedal, or lightly tap the brake. 2. After pressing the main cruise control switch, the cruise control icon will appear on the instrument panel to indicate the armed status. The new X-Trail's cruise control works at any speed but can only be adjusted using the control lever at speeds above 50 km/h. Lightly tapping the brake will cancel the cruise control status.

3

5

Share

What type of engine oil is suitable for the Volkswagen Sagitar 1.6?

The original factory engine oil specification for the Volkswagen Sagitar 1.6 is 5W30 semi-synthetic oil. Since the Sagitar is equipped with a 1.6L naturally aspirated engine, which has a high compression ratio, the internal engine temperature tends to be higher. Therefore, using higher viscosity oil can better protect the engine components and cool them to reduce the operating temperature. Engine oil is the lubricant for the engine, which helps to lubricate the engine and reduce wear during operation. It also provides functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. Engine oil is categorized into mineral oil and synthetic oil, with synthetic oil further divided into semi-synthetic and full-synthetic oil. Full-synthetic oil can operate over a wider temperature range and has a longer service life. Under the same working conditions, full-synthetic oil can protect the engine with lower viscosity. Although full-synthetic oil is more expensive, considering the extended oil change intervals, the cost difference compared to mineral oil is not significant. The service interval for mineral oil is 5,000 kilometers, semi-synthetic oil is 6,500 kilometers, and full-synthetic oil is 10,000 kilometers. Generally, for household cars with naturally aspirated engines, mineral or semi-synthetic oil is sufficient. However, for turbocharged engines, which have more precise internal components and operate under more complex conditions, higher-quality oil with better fluidity is required, and full-synthetic oil is recommended. When selecting the oil viscosity grade, it's important to note that 5W is suitable for most regions in winter, while colder areas (such as Harbin) may require 0W oil for better low-temperature fluidity to adapt to local conditions. For high-temperature viscosity, grades like 30 or 40 are typically sufficient. However, for vehicles frequently driven in congested areas, older vehicles, or heavy-duty long-distance transport, a higher viscosity oil like 0W50 may be appropriate.

9

3

Share

What Causes the Red Oil Can Light to Illuminate?

Where is the OBD interface located on the Focus?

Where is the Cruze's Cabin Air Filter Located?

How to distinguish between BMW 3 Series and BMW 5 Series, and what are the differences?

How to Fix a Faulty Radiator in Chevrolet Cruze?

How to Use Cruise Control in the New X-Trail?

What type of engine oil is suitable for the Volkswagen Sagitar 1.6?

What is the wading depth displayed on the screen of the Land Rover Discovery 4?

What is the difference between Haval's red and blue logos?

How to Open the Fuel Tank Cap of Volkswagen Passat?

Which Brand Does Exeed Belong To?